The Multivapor™ is a compact 6 or 12 position parallel vortex evaporator, designed to optimize existing personal process workflows. Achieves high efficiency for multiple sample evaporation at an impressive small footprint and an easy operation.

The rotary evaporator R-100 is a high-quality, entry level Rotavapor to meet the essential needs in classical laboratory applications. It is capable of a manually adjustable rotation speed of 20 to 280 rpm and equipped with an action jack lift for manual lifting of the evaporating flask. Included…

The I-100 is an easy to use interface that controls the vacuum digitally. It is optimally suited to on/off-regulate the Vacuum Pump V-100. 1190U96 Compatibility Pack: For V-100 and V-700/V-710, with support set, communication cable, power pack, valve unit not included. Vacuum…

A variety of accessories are available for use with Buchi evaporators

The BUCHI accessory is suitable for use with Rotavapor® or Multivapor™ evaporator unit models or with Sepacore® flash system models. You can choose ideal replacement part or accessory which ensures smooth functioning of evaporator units. These products are made of materials which offer enhanced durability.

The economical and silent vacuum source The chemically resistant PTFE diaphragm vacuum pump impresses with its very silent and economical operation. With a flow rate of 1.8 m 3 /h and an ultimate vacuum of 5 mbar, it is optimally suited to be combined with the Rotavapor® R-300. Your…

The BUCHI accessory is suitable for use with vacuum controller, heating baths or evaporator unit models. You can choose your ideal replacement part or accessory which ensures smooth functioning of units. These products are made of materials which offer enhanced durability.

FlashPure EcoFlex cartridges are packed with quality silica designed to help maximize cost and performance on any flash purification instrument. Large selection of cartridge sizes Several stationary phases available Luer lock inlet and Luer slip outlet Non-RFID suitable on any…

These flasks are available in sizes from 50 to 3000 mL with different standard joints (SJ). For special applications at max. 60°C temperature, some flasks are also available with P+G coating. The P+G coating protects against mechanical damage and provides efficient protection against glass…

The Rotavapor® R-80 is an effective rotavapor for limited budgets. Fundamental design fulfills essential needs of evaporation. High longevity due to high quality material. Reliable operation due to robust design. Quick and ergonomic operation with smooth manual lift mechanism. Easy flask…

The efficient way of cooling The Recirculating Chiller F-305 / F-308 / F-314 are specifically designed to work with laboratory equipment such as rotary evaporators, parallel evaporators, Kjeldahl, and extraction products. You benefit from convenient central temperature setting, energy-saving…

The Buchi manual flask holder is one of the main accessory of rotavapor. The large design of the holder has the capacity to hold up to 20 Liter flasks.

FlashPure Select cartridges are packed the highest quality silica designed to help maximize performance on any flash purification instrument. Large selection of cartridge sizes Several choices of particle size Non-RFID suitable on any system FlashPure Select cartridges are…

The BUCHI accessory is suitable for use with melting and boiling point instruments. You can choose your ideal replacement part or accessory which offers smooth functioning of the models. These products are made of materials which ensure long lasting life.

Manual vacuum regulation can also be a very cost-effective solution. Air is drawn in through a fine regulation valve and the resulting vacuum is set. A manometer displays the pressure. The recommended Woulff bottle acts as a buffer vessel and condensate trap.

Samples that are not readily soluble in the mobile phase, are adsorbed onto a solid phase adsorbent (e.g silica or celite). The adsorbent with the added sample is then placed into an empty solid loader tube, and introduced into the Reveleris® flash chromatography instrument.

The Multivapor is a compact 6 position parallel vortex evaporator that is designed to optimize existing personal process workflows. When used in combination with the Rotavapor a unique increase in functionality is observed, as is an expansion of synergy with an impressively small footprint. In the…

The BUCHI accessory is suitable for use with Multivapor™ evaporator unit models. You can choose ideal replacement part or accessory which ensures smooth functioning of evaporator units. These products are made of materials which offer enhanced durability.

Buchi Melting Point Ribbon for Star printer SP512

The dry air supply supplies particle free dry air on demand for the evaporative light scattering detector (ELSD) system of a Chromatography system. The operation of the dry air supply is controlled by the Chromatography system software. A triggering signal is supplied to the dry air supply which in…

The BUCHI condenser and cold trap with receiving flask are suitable for use with B-585 series glass oven models and Kugelrohr models. You can choose your ideal replacement part or accessory which ensures smooth functioning of glass oven units. These products are made of materials which offer…

These flasks are available in sizes from 50 to 3000 mL with different standard joints (SJ). For special applications at max. 60°C temperature, some flasks are also available with P+G coating. Flasks marked P+G are coated. The P+G coating protects against mechanical damage and provides…

The Multivapor™ is a compact 6 or 12 position parallel vortex evaporator, designed to optimize existing personal process workflows. Achieves high efficiency for multiple sample evaporation at an impressive small footprint and an easy operation.

1229D81 - Buchi V-850/855 Vacuum Controller Valve combined with condensate trap and non-return valve with attachment for Rotavapor (not necessary with V-700/710 in stand-alone systems). 1229D82 - Buchi RC-81 remote control can be used to control the vacuum controller and the Rotavapor:…

Convenient and efficient rotary evaporation The R-300 meets the highest expectations in convenience and versatility. Its modular design allows extension of the Rotavapor® R-300 to a fully integrated system where a central interface regulates each component. Your most important…

The Vacuum Pump V-100 is an economical and chemically resistant PTFE diaphragm vacuum pump with a space saving design. It covers the essential needs in vacuum generation. On/offregulated by the Interface I-100, it is optimally suited to work with the Rotavapor® R-100. The ready to use vacuum…

Vacuum Pump V-700/710 compact high performance condensers for producing maximum condensation of residual solvent vapor after the pump. At the same time it separates any liquid solvent from the pump, putting it directly into the receiving flask. Insulation sleeves prevent the formation of…

Simple menus and programs are easy to navigate on the intuitive LCD display, with either manual or automatic, real time video instrument. • For determination of melting and boiling points • Calibration in the field is easily accomplished with an intuitive step-by-step process …

The Multivapor™ is a compact 6 or 12 position parallel vortex evaporator, designed to optimize existing personal process workflows. Achieves high efficiency for multiple sample evaporation at an impressive small footprint and an easy operation.

The Multivapor is a compact 6 position parallel vortex evaporator that is designed to optimize existing personal process workflows. When used in combination with the Rotavapor a unique increase in functionality is observed, as is an expansion of synergy with an impressively small footprint. In the…

The Buchi connection set is one of the main accessory of rotavapor and is compatible to use with Multivapor™ evaporators. This set provides good connection to any evaporator assembly.