The Buchi safety shield is one of the main accessory of rotavapor and is compatible to use with Multivapor™ evaporators. This shield ensures good safety for both the device and the user.

Vacuum Pump V-700/710 compact high performance condensers for producing maximum condensation of residual solvent vapor after the pump. At the same time it separates any liquid solvent from the pump, putting it directly into the receiving flask. Insulation sleeves prevent the formation of…

These flasks are available in sizes from 50 to 3000 mL with different standard joints (SJ). For special applications at max. 60°C temperature, some flasks are also available with P+G coating. Flasks marked P+G are coated. The P+G coating protects against mechanical damage and provides…

The I-100 is an easy to use interface that controls the vacuum digitally. It is optimally suited to on/off-regulate the Vacuum Pump V-100. 1190U96 Compatibility Pack: For V-100 and V-700/V-710, with support set, communication cable, power pack, valve unit not included. Vacuum…

FlashPure Select cartridges are packed the highest quality silica designed to help maximize performance on any flash purification instrument. Large selection of cartridge sizes Several choices of particle size Non-RFID suitable on any system FlashPure Select cartridges are…

Placed between the vapor duct and rotrary evaporator evaporation flask, the bump trap modifies the vapor pathway preventing transfer of any unintended sample between the evaporation flask and condenser in the event of bumping or foaming.

The Multivapor™ is a compact 6 or 12 position parallel vortex evaporator, designed to optimize existing personal process workflows. Achieves high efficiency for multiple sample evaporation at an impressive small footprint and an easy operation.

The Multivapor™ is a compact 6 or 12 position parallel vortex evaporator, designed to optimize existing personal process workflows. Achieves high efficiency for multiple sample evaporation at an impressive small footprint and an easy operation.

The Buchi inlet valve is one of the main accessory of rotavapor and is compatible to use with Rotavapor R-220 EX. This valve provides good connection and ensures an efficient operation.

Fitting to your needs and environment The Pure chromatography instruments are extremly compact, ensure safety on the highest level and are easy to use for any flash or prep HPLC application. The platform has been designed to protect you and your sample and to get more purification in a very…

The rotary evaporator R-100 is a high-quality, entry level Rotavapor to meet the essential needs in classical laboratory applications. It is capable of a manually adjustable rotation speed of 20 to 280 rpm and equipped with an action jack lift for manual lifting of the evaporating flask. Included…

The BUCHI condenser and cold trap with receiving flask are suitable for use with B-585 series glass oven models and Kugelrohr models. You can choose your ideal replacement part or accessory which ensures smooth functioning of glass oven units. These products are made of materials which offer…

The BUCHI accessory is suitable for use with melting and boiling point instruments. You can choose your ideal replacement part or accessory which offers smooth functioning of the models. These products are made of materials which ensure long lasting life.

The Multivapor™ is a compact 6 or 12 position parallel vortex evaporator, designed to optimize existing personal process workflows. Achieves high efficiency for multiple sample evaporation at an impressive small footprint and an easy operation.

The compact Lyovapor™ L-200 Classic offers high-quality Freeze Drying with a high level of automation. Upgrade the Classic L-200 model anytime to achieve full automation in your evaporation process. Cost Effective Modular platform for future upgrades Small footprint …

The Buchi glass body assembly is one of the main accessory of rotavapor and is compatible to use with Rotavapor R-220 EX. Strong glass construction provides added durability and ensures good impact resistance.

Manual vacuum regulation can also be a very cost-effective solution. Air is drawn in through a fine regulation valve and the resulting vacuum is set. A manometer displays the pressure. The recommended Woulff bottle acts as a buffer vessel and condensate trap.

Flask Ring Made Of Non-Slipping EPDM for Rotavapor® R-210 ( 1229D93) and Rotavapor® R-215 ( 1229E13).

Two heating baths are available for the Rotavapor R-210 and R-215. With a heating capacity of 1300 W, they provide enough energy for a fast distillation. The mayor differences between the bath B-491 and B-495 are the bath size and temperature range. The B-491 can be used as a water and oil bath up…

For small - medium sized test quantities that need to be dried quickly and carefully, using a method that can be reproduced. Substances can also be distilled, sublimated or freeze dried. A glass tube with an electrically conductive coating serves as the heating element. The transparent sample area…

The Multivapor is a compact 6 position parallel vortex evaporator that is designed to optimize existing personal process workflows. When used in combination with the Rotavapor a unique increase in functionality is observed, as is an expansion of synergy with an impressively small footprint. In the…

1229D81 - Buchi V-850/855 Vacuum Controller Valve combined with condensate trap and non-return valve with attachment for Rotavapor (not necessary with V-700/710 in stand-alone systems). 1229D82 - Buchi RC-81 remote control can be used to control the vacuum controller and the Rotavapor:…

The Multivapor™ is a compact 6 or 12 position parallel vortex evaporator, designed to optimize existing personal process workflows. Achieves high efficiency for multiple sample evaporation at an impressive small footprint and an easy operation.

The Buchi manual flask holder is one of the main accessory of rotavapor. The large design of the holder has the capacity to hold up to 20 Liter flasks.

1230D81 - Buchi R-210 Rotavapor Vapor Duct, 29/32 for A-Condenser. Prevents cross-contamination and is particularly easy to dismantle and clean. The vacuum seal is manufactured from PTFE composite material and provides long service life with effective sealing. 1230D82 - Buchi R-210…

The Buchi type c condenser assembly comes with a cooling coil and a cold trap and is used with Multivapor™ evaporators. The combination of plastic and glass coating provides added strength.

The economical and silent vacuum source The chemically resistant PTFE diaphragm vacuum pump impresses with its very silent and economical operation. With a flow rate of 1.8 m 3 /h and an ultimate vacuum of 5 mbar, it is optimally suited to be combined with the Rotavapor® R-300. Your…

The Multivapor is a compact 6 position parallel vortex evaporator that is designed to optimize existing personal process workflows. When used in combination with the Rotavapor a unique increase in functionality is observed, as is an expansion of synergy with an impressively small footprint. In the…

The BUCHI accessory is suitable for use with vacuum controller, heating baths or evaporator unit models. You can choose your ideal replacement part or accessory which ensures smooth functioning of units. These products are made of materials which offer enhanced durability.

The Vacuum Pump V-100 is an economical and chemically resistant PTFE diaphragm vacuum pump with a space saving design. It covers the essential needs in vacuum generation. On/offregulated by the Interface I-100, it is optimally suited to work with the Rotavapor® R-100. The ready to use vacuum…

The Buchi vacuum seal is one of the main accessory of rotavapor and is compatible to use with Rotavapor R-220 EX. This seal prevents any leakages and keeps the contents safe.