1230D81 - Buchi R-210 Rotavapor Vapor Duct, 29/32 for A-Condenser. Prevents cross-contamination and is particularly easy to dismantle and clean. The vacuum seal is manufactured from PTFE composite material and provides long service life with effective sealing. 1230D82 - Buchi R-210…

Central control of all process parameters The Interface I-300 is the central control unit for all process parameters of a Rotavapor® R-300 system. This includes rotation speed, temperature (heating, cooling, vapor) and pressure. Various distinct operating modes (e.g. automatic, dynamic,…

The Vacuum Pump V-100 is an economical and chemically resistant PTFE diaphragm vacuum pump with a space saving design. It covers the essential needs in vacuum generation. On/offregulated by the Interface I-100, it is optimally suited to work with the Rotavapor® R-100. The ready to use vacuum…

These flasks are available in sizes from 50 to 3000 mL with different standard joints (SJ). For special applications at max. 60°C temperature, some flasks are also available with P+G coating. The P+G coating protects against mechanical damage and provides efficient protection against glass…

Flask Ring Made Of Non-Slipping EPDM for Rotavapor® R-210 ( 1229D93) and Rotavapor® R-215 ( 1229E13).

These flasks are available in sizes from 50 to 3000 mL and come with ball joint KS-35. All flasks are also available with P+G coating. The P+G coating protects against mechanical damage and provides efficient protection against glass splinters in the event of a breakage.

A variety of accessories are available for use with Buchi evaporators

The rotary evaporator R-100 is a high-quality, entry level Rotavapor to meet the essential needs in classical laboratory applications. It is capable of a manually adjustable rotation speed of 20 to 280 rpm and equipped with an action jack lift for manual lifting of the evaporating flask. Included…

V-700/710 Secondary Condensers Vacuum Pump V-700/710 compact high performance condensers for producing maximum condensation of residual solvent vapor after the pump. At the same time it separates any liquid solvent from the pump, putting it directly into the receiving flask. Insulation…

FlashPure ID cartridges are packed with high quality silica designed to help maximize performance on BUCHI Reveleris chromatography systems. Large selection of cartridge sizes Luer lock inlet Luer slip outlet RFID tag tracks cartridge use and history Standard FlashPure ID…

Vacuum Pump V-700/710 compact high performance condensers for producing maximum condensation of residual solvent vapor after the pump. At the same time it separates any liquid solvent from the pump, putting it directly into the receiving flask. Insulation sleeves prevent the formation of…

Placed between the vapor duct and rotrary evaporator evaporation flask, the bump trap modifies the vapor pathway preventing transfer of any unintended sample between the evaporation flask and condenser in the event of bumping or foaming.

Manual vacuum regulation can also be a very cost-effective solution. Air is drawn in through a fine regulation valve and the resulting vacuum is set. A manometer displays the pressure. The recommended Woulff bottle acts as a buffer vessel and condensate trap.

Two heating baths are available for the Rotavapor R-210 and R-215. With a heating capacity of 1300 W, they provide enough energy for a fast distillation. The mayor differences between the bath B-491 and B-495 are the bath size and temperature range. The B-491 can be used as a water and oil bath up…

Convenient and efficient rotary evaporation The R-300 meets the highest expectations in convenience and versatility. Its modular design allows extension of the Rotavapor® R-300 to a fully integrated system where a central interface regulates each component. Your most important…

For small - medium sized test quantities that need to be dried quickly and carefully, using a method that can be reproduced. Substances can also be distilled, sublimated or freeze dried. A glass tube with an electrically conductive coating serves as the heating element. The transparent sample area…

The compact Lyovapor™ L-200 Classic offers high-quality Freeze Drying with a high level of automation. Upgrade the Classic L-200 model anytime to achieve full automation in your evaporation process. Cost Effective Modular platform for future upgrades Small footprint …

The economical and silent vacuum source The chemically resistant PTFE diaphragm vacuum pump impresses with its very silent and economical operation. With a flow rate of 1.8 m 3 /h and an ultimate vacuum of 5 mbar, it is optimally suited to be combined with the Rotavapor® R-300. Your…

The efficient way of cooling The Recirculating Chiller F-305 / F-308 / F-314 are specifically designed to work with laboratory equipment such as rotary evaporators, parallel evaporators, Kjeldahl, and extraction products. You benefit from convenient central temperature setting, energy-saving…

Simple menus and programs are easy to navigate on the intuitive LCD display, with either manual or automatic, real time video instrument. • For determination of melting and boiling points • Calibration in the field is easily accomplished with an intuitive step-by-step process …

Samples that are not readily soluble in the mobile phase, are adsorbed onto a solid phase adsorbent (e.g silica or celite). The adsorbent with the added sample is then placed into an empty solid loader tube, and introduced into the Reveleris® flash chromatography instrument.

Fitting to your needs and environment The Pure chromatography instruments are extremly compact, ensure safety on the highest level and are easy to use for any flash or prep HPLC application. The platform has been designed to protect you and your sample and to get more purification in a very…

The Multivapor is a compact 6 position parallel vortex evaporator that is designed to optimize existing personal process workflows. When used in combination with the Rotavapor a unique increase in functionality is observed, as is an expansion of synergy with an impressively small footprint. In the…

The Multivapor is a compact 6 position parallel vortex evaporator that is designed to optimize existing personal process workflows. When used in combination with the Rotavapor a unique increase in functionality is observed, as is an expansion of synergy with an impressively small footprint. In the…

These flasks are available in sizes from 50 to 3000 mL with different standard joints (SJ). For special applications at max. 60°C temperature, some flasks are also available with P+G coating. Flasks marked P+G are coated. The P+G coating protects against mechanical damage and provides…