Advantec MFS, Supplies
-
47mm Glass Vacuum Holder, PTFE Seal
Advantec MFSStandard size for microbiology PTFE seal Sintered glass, Stainless steel, or PTFE filter support Borosilicate glass filter holder assemblies for the microanalysis of liquids for biological or particulate contamination under vacuum. The PTFE Seal holder eliminates the…
-
Available pore sizes: 0.10µm, 0.20µm, 0.30µm, 0.45µm, 0.65µm, 0.80µm, 1.0µm, 3.0µm, 5.0µm Colors: White, Black, and Green Surfaces: Gridded or Plain Nonsterile bulk pack Mixed Cellulose Esters (MCE) membrane is a general purpose…
-
47mm Sterility Test Filter Holder
Advantec MFSStandard size for microbiology Sterility testing of antibiotics and pharmaceuticals Use with sterility test manifold Borosilicate glass filter holder assembly for the microanalysis of liquids for biological or particulate contamination under vacuum. The Sterility Test…
-
47mm All-Glass Filtration Assemblies
Advantec MFSGround glass connection points Funnel, Base, and Flask Sintered glass, Stainless steel, or PTFE filter support Borosilicate glass filter holder assemblies for the microanalysis of liquids for biological or particulate contamination under vacuum. The All-Glass design restricts contact…
-
Available pore sizes: 0.10µm, 0.20µm, 0.30µm, 0.45µm, 0.65µm, 0.80µm, 1.0µm, 3.0µm, 5.0µm Colors: White, Black, and Green Surfaces: Gridded or Plain Nonsterile bulk pack Mixed Cellulose Esters (MCE) membrane is a general purpose…
-
Quantitative Ashless Filter Paper
Advantec MFSAdvantec Quantitative Ashless Filter Papers are made from the highest quality alpha cotton cellulose. One critical step in the manufacturing process of these filter papers is acid washing. All grades are double acid washed in hydrochloric then hydrofluoric acid to reduce levels of SiO2, CaO, and…
-
Opticlear MCE Membrane Filters for Air Monitoring
Advantec MFSAdvantec developed the Opticlear Mixed Cellulose Esters (MCE) membrane filters for airborne asbestos monitoring. Opticlear MCE offers superior optical clarity in which to view particles compared to standard MCE. Clears completely, providing an optimal background for accurate particle…
-
PVC Manifold
Advantec MFSLightweight Resistant to acids Standard cup accepts a No.8 or 8b stopper Lightweight and durable PVC material makes this vacuum manifold a great alternative to stainless steel. Polyvinylchloride(PVC) is resistant to acids. The standard cup accepts a No.8 or 8b stopper to adapt to…
-
3mm, 13mm, 17mm, 25mm, 30mm, 50mm 0.10µm to 5.0µm Minimal sample hold-up High purity, non-pigmented housing and no adhesives used Advantec MFS offers a broad selection of filter media in convenient disposable syringe filters and 50mm in-line filter units. The…
-
25mm All-Glass Filtration Assemblies
Advantec MFSFilter small volumes Ground glass connection points Funnel, Base, and Flask Borosilicate glass filter holder assemblies for the microanalysis of liquids for biological or particulate contamination under vacuum. The All-Glass design restricts contact with reactive surfaces such…
-
Glass Fiber Filters, Thicker for Viscous Liquids
Advantec MFSAdvantec Glass Fiber Filters are depth filters made of pure borosilicate glass microfibers. These grades are thicker and have a high loading capacity and typically faster flow times. Recommended for filtering viscous fluids such as proteinaceous solutions and gels and as prefilter to extend…
-
Sanitary Pressure Filter Holders, Stainless Steel
Advantec MFSThreadless Sanitary Connections 90mm, 142mm, 293mm Filter Diameters Available in Type 304ss and 316ss Large Sanitary Stainless Steel Pressure Filter Holders for batch type laboratory filtration using disc media. Sanitary connections can be completely disassembled for thorough…
-
High Pressure In-Line Filter Holder, Stainless Steel
Advantec MFSHigh-quality and durable, this 47mm stainless steel in-line pressure holder can operate at high pressures up to 1420 psi (9.8 MPa). Standard FPM(Viton) O-rings are compatible with many aggressive liquids and gases. Type 304ss body and type 316ss sintered support screen. An optional…
-
Chlorine Test Papers
Advantec MFSDetecting the concentration of residual chlorine in sodium hypochlorite solution (NaClO) or hypochlorous acid (HClO). Dip the indicator test strip in solution and compare to the color chart on the container. 1-10ppm is a 5x85mm plastic strip with indicator pad (50/pk); 10-50ppm and 25-200ppm…
-
Glass Fiber Filters, Water Quality Testing
Advantec MFSAdvantec Glass Fiber Depth Filters feature high-loading capacity, fast flow rates, are highly resistant to chemical attack, and biologically inert. General purpose and clarifying filtration grades. Binder-free and thermostable to 500°C. Grade GA55 is a thin filter recommended for…
-
pH Test Papers - Narrow Range
Advantec MFSVarious types of indicator papers cover a wide pH range to allow for good accuracy of determining pH value of a solution. These Narrow Range Test Papers offer high sensitivity and sharp color change. Narrow pH unit graduation: 0.2-0.4 (Congo Red: color change to red indicates within specified range…
-
Qualitative Filter Paper
Advantec MFSAdvantec Qualitative Filter Papers are made of 100% cotton linter cellulose. Primarily used for clarifying and removing precipitates (ppt) and preparation for quantitative analysis. These papers can be used over a pH range from 0-12 and a maximum temperature of 120°C. Ash content of 0.1%.…
-
Material Stainless Steel (AISI 304) Max. Pressure 7 bar Quantity 1 Ea. Type Relief Valve
-
Stainless Steel Gas In-Line Filter Holders
Advantec MFSThreaded locking ring enables filter changes without disconnecting the gas lines. Dual support screens protect the membrane filter from reverse pressure surges and allow forward and reverse flow. Tighten by hand only - hand torque maximum is 15 lbs/in. Type 304ss body and support screen.…
-
Cellulose Acetate (CA) Membrane Filters
Advantec MFSLow protein binding Low aqueous extractables Advantec Cellulose Acetate (CA) membrane filters are low protein binding and ideally suited for applications such as diagnostic cytology and receptor binding studies. Cellulose Acetate's hydrophilic nature and it's low absorptive…
-
Glass Fiber Filters, Air Monitoring
Advantec MFSAdvantec Glass Fiber Filters are depth filters made of pure borosilicate glass microfibers. Highly resistant to chemical attack and biologically inert. Binder-free and thermostable to 500°C. These grades are recommended primarily used in environmental air monitoring applications. Grade…
-
Hydrophobic PTFE Membrane Filters
Advantec MFSOptional support backing for improved handling Filter corrosive solvents Sterile venting Protect pumps and machinery from aqueous aerosols PTFE membrane is a thin, highly porous film that behaves as an absolute retentive membrane. Their inherently hydrophobic nature make PTFE…
-
PVC Extraction Manifold
Advantec MFSTapered branch accepts 40/35 female joint Broad base for extra stability Ideal for EPA Method 1664 oil and grease analysis Lightweight and durable PVC material makes this extraction manifold a great alternative to stainless steel. Polyvinylchloride(PVC) is resistant to acids. The…
-
• 3mm, 13mm, 25mm, 50mm • 0.10µm to 1.20µm • Minimal sample hold-up • High purity, non-pigmented housing and no adhesives used Advantec MFS offers a broad selection of filter media in convenient sterile disposable syringe filters…
-
Chemically Resistant PFA In-Line Filter Holders
Advantec MFSFilter acids, alkalis, or organic solvents Dual support screens allow flow in either direction Perfluoroalkoxy(PFA) polymer is very similar to PTFE resin. The PFA holder offers superior chemical compatibility and can be used with chemically aggressive liquids. Dual support screens allow…
-
Polysulfone Vacuum Filter Holders
Advantec MFS47mm Filter Graduated Funnels: 300mL, 500mL, 800mL Autoclavable Advantec’s Polysulfone 47mm Filter Holders are an economical alternative to glass vacuum holders. The durable polysulfone plastic construction is chemically resistant and can withstand mishandling. The recessed…
-
Polypropylene In-Line Filter Holder
Advantec MFSThermoplastic polymer Polypropylene (PP) lends to this units durability and compatibility with a wide range of chemical solvents and temperatures. Exterior locking ring design allows unit to be assembled quickly and efficiently without tearing the membrane or removing from lines. Body and…
-
Available pore sizes: 0.10µm, 0.20µm, 0.30µm, 0.45µm, 0.65µm, 0.80µm, 1.0µm, 3.0µm, 5.0µm Surfaces: Gridded or Plain Nonsterile bulk pack Mixed Cellulose Esters (MCE) membrane is a general purpose filter used in many applications…
-
Sterile Mixed Cellulose Esters (MCE) Membrane Filters - White Available pore sizes: 0.20µm, 0.45µm, 0.65µm, 0.80µm, 1.0µm, 3.0µm Color: White Surface: Gridded or Plain, and with or without Hydrophobic Edge (HE) Packaging: Individually wrapped or…
-
90mm Glass Vacuum Holder Assemblies
Advantec MFSFilter larger volumes of liquid Filter viscous, heavy particle or biobuden samples Sintered glass or Stainless steel support Borosilicate glass filter holder assemblies for the microanalysis of liquids for biological or particulate contamination under vacuum. The 90mm holder…
-
Multi-Media Pressure Filter Holders, Stainless Steel
Advantec MFSUse a broad range of media thickness, including pads Multiple layers of media can be used without lateral wicking Unlike standard holders, the Multi-Media Pressure Sealing Filter Holder has a dual sealing system which allows the use of a broad range of media thickness, including pads.…