Ace Glass, NEW! Life Science
-
Stand, Photochemical Reactor
Ace Glass7837-75 universal, small reactor stand accomodates 250-1000ml vessels through the use of 7837 series PTFE inserts. Manufactured of powder coated aluminum, our stand may be used with our 7840,7841,7844,7861, 7863,7864 and 7865 jacketed and unjacketed reactors. Stand is 27cm high. 7837 code -50 and…
-
Support Stand, Kilo Scale Reactors
Ace GlassThomas No. 1165L75, 1165L76, 1165L77, 1165L78, 1165L79, 1165L80 Redesigned, modular Kilo scale reactor support stand Thomas No. 1165L81 Bracing set to further strengthen the Universal Stand²against the weight of our explosion proof motor. Set²consists of two braces. …
-
Instantly variable jacket temperature, to 200 degrees C, enables programmed drying. Instatherm coated jacket with a viewing strip for monitoring temperatures by means of an adjustable depth thermometer inserted into end, or a thermowell (6-7mm OD) may be substituted for the purpose of employing a…
-
Condenser, Reflux, Bulb
Ace GlassBulb style condenser with drip-tip bottom joint. Provides high efficiencies in a compact size.
-
Condenser, Liebig, No Hold Up
Ace GlassWith standard taper or spherical joint at bottom and top. Hose connections are size D.
-
Vapor Duct Tube, Rotary Evaporator
Ace GlassRotary evaporator vapor duct tubes. Precision machined to fit model R220 evaporators. Available in either borosilicate glass or 316 stainless steel.
-
Rotary Evaporator, Firestone
Ace GlassIngenious rotary evaporator for use with any laboratory stirring motor. Hollow glass or stainless steel shaft with 14/20 or 24/40 ends. Micro version with hollow glass and 14/40 inner joint available. Complete item supplied with joint clamp. Does not include stirring motor, chuck, flask or splash guard.
-
Condenser, Friedrichs
Ace GlassReflux controlled by regulating jacket temperature. Provides compact spiral path for condensation. Jacket length 200mm. Bottom standard taper 24/40 joint.
-
Chromatographic column with integral reservoir and #15 Ace-Thred at top, and 2mm bore 1:5 taper PTFE plug at bottom. Column supplied with 7506-06 Nylon bushing and FETFE O-Ring. Complete item consists of column with bushing and O-Ring, and 5853-07 Tubing Connector for connecting 12.5 to 14mm O.D.…
-
Condenser, Allihn
Ace GlassBulb type, approximately one bulb per 50 mm, with 24/40 standard taper inner joint at bottom.
-
Spiral Reflux Condenser
Ace GlassSpiral reflux condenser with inlet and outlet hose barbs located on the same side at the top of the condenser body for easy hose connections. These condensers are available in multiple lengths which allow for greater surface area dependant on the appli
-
Replacement receiving flask adapters for Buchi rotary evaporators. Joins steam tube to receiving flask. Combi-clip not included.
-
Micro Soxhlet, Improved Design
Ace GlassDesigned for small chemical applications. Improved design permits greater condensing capacity. Condenser approximately 139mm jacket length. Joint between condenser and extractor is 24/25. Flask joint is 14/20. Designed to accommodate paper thimble, size 10 x 50 mm. Flask is 30mL capacity. Hose…
-
The DynaBloc heating system supplies low-cost, highly efficient, simultaneous stirring and/or heating of multiple samples contained within various sizes of small, vials and tubes. To anchor blocks to either a 145mm or 135mm diameter hotplate/stirrer, use our 13698-03 (145mm) or 13698-05 (135mm)…
-
Cords, Connecting, Instatherm & UV Lamps
Ace GlassInstatherm connecting cords, codes -16 & -20 feature in-line fuse protection against surges and high voltage. Code -16 fits our earlier style baths, pre 2009, while code -20 features a twist-lok socket used in our current baths. Code -05 fits a wishbone connector commonly used on the lid of…
-
Expansion Tank, Rotary Evaporator
Ace GlassBorosilicate glass expansion tank for large scale rotary evaporators. This fits easily into model R220 rotary evaporators. The tank is part of all D Series glass sets. Available in either safety coated or plain versions. Inner DN ball joint inlcudes a size -225 CAPFE o-ring.
-
Vacuum Gauge, Digital - Digivac
Ace GlassVacuum instrument,digital,0.001 - 760 torr,LED display,²thermocouple vacuum gauge tube,100-230v 50/60Hz,CE rated²Optional features available:²2C: The ability to control an external device via 2 SPDT²external connections at user specified setpoints.²5V5T: Provides a voltage output proportional to…
-
Chromatographic column with 2mm bore, 1:5 taper solid PTFE stopcock plug and porosity B (70 - 100 m) fritted disc sealed in.
-
The improved design of ACE extractor condensers permits greater condensing capacity, cycling rates may be doubled over conventional style extractors. Complete consists of flask cap, condenser, extractor, and flask.
-
Extractor, Soxhlet
Ace GlassSoxhlet extactor body with standard taper outer joint at top and 24/40 standard taper inner joint at bottom.
-
Jacketed, adjustable bed chromatographic column used for recycling, ascending descending applications. Completely jacketed for better temperature uniformity with single bushing at each end allowing for quick and easy adjustment of the PTFE plunger. the 25-50 micron porous glass disc gives rapid…
-
Condenser, Long Path
Ace GlassTurbulent flow created makes this condenser very desirable for use under reduced pressure. Internal and external cooling surfaces result in high efficiency per unit length. Joints are standard taper 24/40.
-
Simple absorption column for rapid preparative separations with moderate resolution. Modified with a #25 Ace-Thred connector in place of 35/20 joints, for grease free connection. Internally threaded connector & Nylon bushing make a pressure-tight, O-Ring compression seal with glass stem on…
-
Condenser, Friedrichs
Ace GlassWith molded spiral condensing surface and joint at bottom and top. Jacket length 250mm. Available in various joint sizes with hose barbs or Ace-Safe connectors.
-
Condenser, Allihn-Kronbitter, No Hold-Up
Ace GlassWith surface of bulbs on one side and the other side flat to permit its use on an angle. With standard taper 24/40 inner and outer joints at top and bottom.
-
Clamp, Two-Piece, Flat Flange
Ace GlassTwo-piece unfinished aluminum clamp with PTFE gaskets and brass tightening bolts. Code -03 fits our 7646-18 75mm o-ring joint and our 7519 (76mm) filter support assembly. Code -05 fits our 7519 (102mm) filter support assembly and our 6504 kettles with
-
Replacement condenser for Buchi rotary evaporators. Available plain or safety coated. Includes PTFE hose barbs,GL caps and plug.
-
Chromatographic column with 24/40 standard taper joint at top and 2mm bore 1:5 taper solid PTFE stopcock plug at bottom. Column supplied with 7506-06 Nylon bushing and FETFE O-Ring. Complete item consists of column with bushing and O-Ring, and 5853-07 Tubing Connector for connecting 12.5 to 14mm…
-
Instatherm® Oil Bath
Ace GlassOil baths heated by Instatherm®, an integral noble metal alloy fused permanently to the glass & covered with a tough silicone rubber treated glass cloth insulation which serves as a thermal barrier as well as protection against physical shock. Rapid heat response - low thermal lag. For…
-
Column, Chromatography
Ace GlassRugged columns with internally threaded ends to which a wide choice of upper and lower end pieces can be fitted using 5837, 5838, 5841, 5842, and 5843 fittings. Available in a variety of lengths and diameters. Some sizes available with epoxy coating for added protection against scratches.
-
Open ring supports with long extension arms for supporting glassware from the bottom, such as separatory funnels and powder funnels. PVC coated ring also protects glass from scratching. Long extension arms allow for easier connection to labframes or stands.
-
Condenser, Graham
Ace GlassWith standard taper 24/40 inner and outer joint at bottom and top. Hose connections are size D, for 3/8in ID tubing. con-nections are size D.