Ace Glass, Nucleic Acid Sample Preparation
-
Condenser, Pilot Plant
Ace GlassHighly efficient. May be used either for through condensation or refluxing. Internal baffling acts as impinging surface for entrained particles and discourages diffusion loss. Available with hose barbs or Ace-Safe connectors.
-
Circulator Hose Support
Ace GlassAll stainless steel, fully adjustable clamps for securing and supporting circulator hoses used with jacketed pilot plants. The universal clamps adjust to any pipe style pilot plant stand, and the clip will accommodate any standard circulator hose size.
-
Chromatographic Column, With Filter Disc
Ace GlassChromatographic column with 24/40 joint at top, 2 mm bore 1:5 taper solid PTFE stopcock plug at bottom and porosity B (70 - 100 m) fritted disc sealed near bottom of tube. These columns also appear in expanded listing under 5871.
-
Condensers/Coolers, Rotary Evaporator
Ace GlassReplacement, borosilicate glass components for R220 rotary evaporators Product offering includes triple coil condensers, Bullfrog condensers and the lower condensate coolers for rotary evaporators. Available in either plain or safety coated versions. Units include black SVL caps & red GL thread…
-
Chromatographic column with integral reservoir and #15 Ace-Thred at top, and 2mm bore 1:5 taper PTFE plug at bottom. Column supplied with 7506-06 Nylon bushing and FETFE O-Ring. Complete item consists of column with bushing and O-Ring, and 5853-07 Tubing Connector for connecting 12.5 to 14mm O.D.…
-
Distilling Column, Jacketed
Ace GlassJacket length 250 mm, with indents for supporting glass beads or other packing.
-
Condenser, Air Reflux
Ace GlassMicroscale air condenser normally used in reflux experiments. When packed with desiccant material, condenser becomes a drying tube. With inner joint at bottom, outer joint at top. Codes -10, -14 and -17 supplied with drip tip for use with 9595 Spinning Band Column. Effective length, approximately…
-
Chromatographic Column, 1:5 PTFE Plug
Ace GlassChromatographic column with 2mm bore 1:5 taper solid PTFE stopcock plug at bottom.
-
Lab Stand Support Shelf
Ace GlassLab stand support shelf fits any stand with up to 5/8"od rod. Stand measures 7 x 10" and is available with or without 4" rubber-bordered center hole. Manufactued from light, cast aluminum and epoxy coated. Rod mounted codes -04 & -06 feature a 5/8in OD x 12in long stainless rod with a through hole…
-
Chromatographic Column, Plain
Ace GlassPlain, open top, chromatographic column, universally suitable for many separations.
-
Clamp, Quick Release
Ace GlassStainless Steel Quick Release clamp for use with two-piece Pressure Reaction Flasks and Heads with Duran flanges. Available with or without rod for clamping to support frame. Note: Ensure proper bottom support for your reactor, the clamp is only recommended for stabilization, not support.
-
Column, Chromatography
Ace GlassRugged columns with internally threaded ends to which a wide choice of upper and lower end pieces can be fitted using 5837, 5838, 5841, 5842, and 5843 fittings. Available in a variety of lengths and diameters. Some sizes available with epoxy coating for added protection against scratches.
-
Replacement condenser for Buchi rotary evaporators. Available plain or safety coated. Includes PTFE hose barbs,GL caps and plug.
-
Condenser, Allihn
Ace GlassBulb type, approximately one bulb per 50mm, with water cooled standard taper 24/40 inner and outer joint at bottom and top.
-
Microscale photochemical reactor with internally threaded connections both top and bottom of head. Top is #15 Ace-Thred that accepts 12.5-14mm O.D. tubes such as 9720-23 Finger Condenser; bottom is #25 Ace-Thred that accepts a 24mm O.D. quartz or glass (borosilicate) tube for photolysis…
-
Condenser, Liebig, No Hold Up
Ace GlassWith standard taper 24/40 outer joint at top. Jacket length 300 mm. Hose connections are size D.
-
The improved design of ACE extractor condensers permits greater condensing capacity, cycling rates may be doubled over conventional style extractors. Complete consists of flask cap, condenser, extractor, and flask.
-
Condenser, Long Path
Ace GlassTurbulent flow created makes this condenser very desirable for use under reduced pressure. Internal and external cooling surfaces result in high efficiency per unit length. Joints are standard taper 24/40.
-
Chromatographic column with integral reservoir for connecting 5872 Flow Control Adapter. With 2mm bore, 1:5 taper solid PTFE stopcock plug at bottom. Available with or without porosity B (70 - 100 m) fritted disc sealed in. Order column, flow control adapter and clamp separately.
-
Condenser, Dewar Type
Ace GlassDewar type condenser for use with dry ice or other solid cooling agents. Upper tube is 12mm O.D. At bottom is standard taper 24/40 inner joint.
-
Condenser, Reflux, Spiral
Ace GlassSpiral coil, reflux condenser with angled top outer joint and two equal side arms with size C hose connections.
-
Simple absorption chromatography column for rapid preparative separations with moderate resolution. Allows separations of samples from 0.01 to 10.0g in 10-15 minutes. Column and reservoir, only, are Epoxy Coated. Reservoir connects between column and flow control adap-ter. Joints on column,…
-
Adjusta-chrom, Recycling Column
Ace GlassAdjustable bed chromatographic column used for recycling, ascending or descending applications allowing for quick and easy adjustment of the PTFE plunger. The Por. C (25-50m) glass disc gives rapid flow with a minimum of mixing. Pressure tight to 3.515 Kg/cm2 (50 psi) at room temperature or…
-
Condenser, Dewar
Ace GlassFor use with dry ice and other solid cooling agents. Can also be adapted for use as a small constant temperature bath by using a constant boiling liquid. In this manner, can also be used as an oil bath. The larger size will hold 100mL flask, small size
-
Column, Chromatography, Jacketed
Ace GlassColumns are fully jacketed including internally threaded ends for circulation of heat exchange media. A wide choice of upper and lower end pieces can be fitted to columns using 5837, 5838, 5840, 5841, 5842 and 5843 fittings. Available in variety of diameters and lengths. Not for use with 5819 fittings.
-
Powerstat Mounting Bracket
Ace GlassMounting bracket permits easy and convenient mounting of 12080 or 12081 Powerstats on standard laboratory racks or stands having up to 16mm O.D. rods. Made of strong, rust and corrosion resistant aluminum alloys. Bracket is attached to the bottom of the powerstat by two screws and to the rack or…
-
Adapter, Injection Port, Michel-Miller
Ace GlassA simple, all PTFE septum injector. Allows direct, on-column injection to the center of the filter disc at top of column without stopping the solvent flow through the 1/4"-28 female side thread (with or without helicoil). Locknut design provides leaktight seal without o-rings. You can order the…
-
Safety Shield, Plastic, Michel-Miller
Ace GlassAcrylic safety shield and polyethylene cap for use with Michel-Miller Columns to insure safe operation at pressures to 300 psi. Top thread of column is hung in polyethylene cap; cap is then held by the plastic shield. Clamp the shield, not the column.
-
Column, Chromatography
Ace GlassLarge chromatography columns with o-ring grooved flat flanged tops and Ace-Thred bottoms. Column extenders and 5860 heads should be mated to columns with our 6517 series clamps. All columns and extenders are supplied with either a 7855-254 (4") or 7855-260 (6") silicone o-ring. For capfe o-rings,…
-
Micro cold finger condenser with drip tip on bottom for directing drops into the well of 14/10 jointed 9576 or 9599 Hickman Stills. Cold water is introduced into cold finger periodically by means of a Pasteur pipet. Complete item consists of cold finger condenser and multi- purpose vacuum adapter…
-
Stand, Photochemical Reactor
Ace Glass7837-75 universal, small reactor stand accomodates 250-1000ml vessels through the use of 7837 series PTFE inserts. Manufactured of powder coated aluminum, our stand may be used with our 7840,7841,7844,7861, 7863,7864 and 7865 jacketed and unjacketed reactors. Stand is 27cm high. 7837 code -50 and…
-
Heidolph RZR 1 overhead stirrer with tools and accessories features 2 gears delivering 280 to 2200rpm with analog control. 115v 60Hz input motor is high torque, up to 100Ncm. Use code -32 stir shaft for slow speed, up to 250rpm and code -34 shaft for speeds up to 2200rpm. Universal stand and clamp…