Ace Glass, Stopcocks
-
-
Stopcock adapter, top and bottom o-ring joints, Easy Action plug,/p>
-
High vacuum stopcock with Tef-Cap O-Ring seals with variable openings from 0-3 to 0-10mm. Eliminate exposure to corrosive materials. For use to at least 13.6 Kg internal pressure. An ultimate vacuum of 10-7 can be realized with the standard three seals
-
Straight connecting adapter, 4mm glass plug stopcock, 15mm O-Ring top joint and either a spherical joint or an inner standard taper joint on the bottom.
-
Stopcock adapter, top outer joint, bottom inner joint, PTFE plug. Spherical joint versions are both outer joints top and bottom.
-
Stopcock, High Pressure, Straight Bore
Ace GlassHigh pressure straight bore stopcock with solid plug.
-
Easy action PTFE plug with hooded handle, threaded into heavy wall glass barrel, permits smooth adjustment. Arms are at 90 degree angle. Double PTFE ring seal prevents exposure of FETFE backup O-Ring to corrosive gases and liquids. Plug, with hooded ha
-
Stopcock adapter featuring either a bent or straight hose connection and a PTFE plug.
-
High vacuum stopcock, precision grade, with oblique bore hollow plug.
-
Replacement Stopcock Plug
Ace GlassReplacement stopcock plugs with inlet feeds for rotary evaporators. Codes -08, -10 for Buchi assemblies and -20 for Heidolph 4000 series. All plugs are 19/38.
-
Adapter, PTFE Stopcock, Inner Drip Tip
Ace GlassStraight connecting PTFE stopcock adapter with standard taper joints. Bottom joint connection has an inner drip tip tube.
-
Stopcock Plug, Inlet Feed
Ace GlassPressure gauges for monitoring pressure in several pieces of apparatus such as pressure vessels, pressure reactors & chromatography columns. Pressure ranges vary from 0-60psi and up to 0-400psi. Gauges have different NPT end fittings and internal materials, as well as various dial ranges. Some come…
-
High vacuum stopcock that eliminates exposure to corrosive materials. Use to at least 13.6 Kg internal pressure. Variable openings from 0-3mm to 0-10mm. Ultimate vacuum of 10-7 can be realized with standard three seals. Smooth acting valve permits fine
-
High vacuum stopcock with easy action plug that has blunt, flat end instead of the tapered end supplied with 8194 or 8195. This modification means stopcock is a quick opening model versus the variable opening 8194 and 8195. Vacuums of 10-7 can be reali
-
-
Stopcock adapter, inner joint bottom, #7 top, stopcock side arm with PTFE plug and hose connection end. Supplied bushing and FETFE o-ring allows compression seal with thermometers, bleed tubes, etc. Will accomodate thermometers or tubes up to 7mm OD. F
-
-
Adapter, Stopcock and syringe port
Ace GlassStandard taper adapter with 8-425 gpi threaded top and a 2mm bore stopcock with a ptfe plug. Syringe port is supplied with a cap and septum.
-
Used to regulate and measure flows, all working parts and indicia are visible, meter readings are unobstructed; the outlet swivels 360 degrees. Pressure tight to 2Kg/cm2 or more (air). Flow rates from 5 to 50L/minute air or 0.1 to 500cc/min water. Each tube is furnished with either a 316 stainless…
-
-
Adapter, Distillation, Pilot Plant
Ace GlassDistillation adapter for use with Pilot Plant reactors. Simple design collects the distillate above a PTFE stopcock with swagelok compatible take-off. Available with either one or two upper joints.
-
Stopcock Plugs, Double Oblique Bore
Ace GlassDouble oblique bore stopcock plugs available in 1:5 PTFE or Borosilicate.
-
Stopcock, Vacuum, PTFE
Ace GlassThreaded vacuum stopcock comes with PTFE plug with hooded, bakeble handle. Needle valve version permits smooth valve adjustment down to 0.1 cc/min flow rate. Easy action version threads into heavy wall glass barrel also permitting smooth adjustment. Do
-
Stopcock adapter, top outer joint, bottom inner joint, glass plug. Spherical joint versions are both outer joints top and bottom.
-
Adapter, Sampling
Ace GlassWith standard taper 24/40 joints and 1:5 solid PTFE stopcock plug connected to side of apron for removing distillate or sample. Plug bore is 2mm. Approximate capacity 125mL. Code -04 has #7 Ace-Thred after stopcock, code -29 has plain tubing.
-
PTFE Stopcock Valve, 2 Way
Ace GlassPTFE stopcock valve, 2-way, one 1/4 inch male luer port and one 1/4 inch male NPT port, 0.046 orifice. PTFE valve used with NPT fittings. Various ends available (male and female NPT, luer, 1/4" tube and 1/4"-28 UNF). IPS PTFE Stopcocks made of virgin PTFE. Compression ferrules made of virgin PTFE.…
-
Flickit Valve, Riley
Ace GlassQuick-open, valve-type stopcock with glass barrel, PTFE plug, and FETFE O-rings. Unique design allows introduction of particulates or capsules into a system using a rod or plunger. Barrel is angled with respect to the side arms, plug has corresponding
-
Stopcock, High Vacuum, Easy Action Plug
Ace GlassHigh vacuum straight thru stopcock available with several types of Easy Action plugs including bakeable PTFE, PTFE stem with glass filled PTFE threads, and glass with Nylon handle, for allowing smooth adjustment. A variety of replacement items are avai
-
Straight connecting PTFE stopcock adapter. 15MM O-Ring top joint, either a spherical or standard taper bottom joint. Comes with FETFE O-Ring.
-
Stopcock adapter featuring either a bent or straight hose connection and a glass or PTFE plug. See Ace 8223 for replacement glass plug and Ace 8224-04 for PTFE plug.
-
-