The dry air supply supplies particle free dry air on demand for the evaporative light scattering detector (ELSD) system of a Chromatography system. The operation of the dry air supply is controlled by the Chromatography system software. A triggering signal is supplied to the dry air supply which in…

The BUCHI accessory is suitable for use with Rotavapor® or Multivapor™ evaporator unit models or with Sepacore® flash system models. You can choose ideal replacement part or accessory which ensures smooth functioning of evaporator units. These products are made of materials which offer enhanced durability.

The Vacuum Pump V-100 is an economical and chemically resistant PTFE diaphragm vacuum pump with a space saving design. It covers the essential needs in vacuum generation. On/offregulated by the Interface I-100, it is optimally suited to work with the Rotavapor® R-100. The ready to use vacuum…

Convenient and efficient rotary evaporation The R-300 meets the highest expectations in convenience and versatility. Its modular design allows extension of the Rotavapor® R-300 to a fully integrated system where a central interface regulates each component. Your most important…

The rotary evaporator R-100 is a high-quality, entry level Rotavapor to meet the essential needs in classical laboratory applications. It is capable of a manually adjustable rotation speed of 20 to 280 rpm and equipped with an action jack lift for manual lifting of the evaporating flask. Included…

Fitting to your needs and environment The Pure chromatography instruments are extremly compact, ensure safety on the highest level and are easy to use for any flash or prep HPLC application. The platform has been designed to protect you and your sample and to get more purification in a very…

These flasks are available in sizes from 50 to 3000 mL and come with ball joint KS-35. All flasks are also available with P+G coating. The P+G coating protects against mechanical damage and provides efficient protection against glass splinters in the event of a breakage.

The economical and silent vacuum source The chemically resistant PTFE diaphragm vacuum pump impresses with its very silent and economical operation. With a flow rate of 1.8 m 3 /h and an ultimate vacuum of 5 mbar, it is optimally suited to be combined with the Rotavapor® R-300. Your…

Vacuum Pump V-700/710 compact high performance condensers for producing maximum condensation of residual solvent vapor after the pump. At the same time it separates any liquid solvent from the pump, putting it directly into the receiving flask. Insulation sleeves prevent the formation of…

1230D81 - Buchi R-210 Rotavapor Vapor Duct, 29/32 for A-Condenser. Prevents cross-contamination and is particularly easy to dismantle and clean. The vacuum seal is manufactured from PTFE composite material and provides long service life with effective sealing. 1230D82 - Buchi R-210…

V-700/710 Secondary Condensers Vacuum Pump V-700/710 compact high performance condensers for producing maximum condensation of residual solvent vapor after the pump. At the same time it separates any liquid solvent from the pump, putting it directly into the receiving flask. Insulation…

For small - medium sized test quantities that need to be dried quickly and carefully, using a method that can be reproduced. Substances can also be distilled, sublimated or freeze dried. A glass tube with an electrically conductive coating serves as the heating element. The transparent sample area…

These flasks are available in sizes from 50 to 3000 mL with different standard joints (SJ). For special applications at max. 60°C temperature, some flasks are also available with P+G coating. The P+G coating protects against mechanical damage and provides efficient protection against glass…

The BUCHI accessory is suitable for use with Multivapor™ evaporator unit models. You can choose ideal replacement part or accessory which ensures smooth functioning of evaporator units. These products are made of materials which offer enhanced durability.

The Multivapor is a compact 6 position parallel vortex evaporator that is designed to optimize existing personal process workflows. When used in combination with the Rotavapor a unique increase in functionality is observed, as is an expansion of synergy with an impressively small footprint. In the…

Spider evaporators are for use when you need to concentrate several samples under the same conditions. Up to five samples can be concentrated simultaneously using 50 or 100 mL flasks. Up to twenty samples can be concentrated simultaneously using 20 mL cylindrical tubes.

The Multivapor is a compact 6 position parallel vortex evaporator that is designed to optimize existing personal process workflows. When used in combination with the Rotavapor a unique increase in functionality is observed, as is an expansion of synergy with an impressively small footprint. In the…

The I-100 is an easy to use interface that controls the vacuum digitally. It is optimally suited to on/off-regulate the Vacuum Pump V-100. 1190U96 Compatibility Pack: For V-100 and V-700/V-710, with support set, communication cable, power pack, valve unit not included. Vacuum…

The efficient way of cooling The Recirculating Chiller F-305 / F-308 / F-314 are specifically designed to work with laboratory equipment such as rotary evaporators, parallel evaporators, Kjeldahl, and extraction products. You benefit from convenient central temperature setting, energy-saving…

The Multivapor is a compact 6 position parallel vortex evaporator that is designed to optimize existing personal process workflows. When used in combination with the Rotavapor a unique increase in functionality is observed, as is an expansion of synergy with an impressively small footprint. In the…

Placed between the vapor duct and rotrary evaporator evaporation flask, the bump trap modifies the vapor pathway preventing transfer of any unintended sample between the evaporation flask and condenser in the event of bumping or foaming.

For small - medium sized test quantities that need to be dried quickly and carefully, using a method that can be reproduced. Substances can also be distilled, sublimated or freeze dried. A glass tube with an electrically conductive coating serves as the heating element. The transparent sample area…

The BUCHI accessory is suitable for use with vacuum controller, heating baths or evaporator unit models. You can choose your ideal replacement part or accessory which ensures smooth functioning of units. These products are made of materials which offer enhanced durability.

Flask Ring Made Of Non-Slipping EPDM for Rotavapor® R-210 ( 1229D93) and Rotavapor® R-215 ( 1229E13).

The BUCHI condenser and cold trap with receiving flask are suitable for use with B-585 series glass oven models and Kugelrohr models. You can choose your ideal replacement part or accessory which ensures smooth functioning of glass oven units. These products are made of materials which offer…

A variety of accessories are available for use with Buchi evaporators

The Buchi vacuum gasket set is compatible for use with B-585 glass oven. Gaskets ensure smooth functioning of oven units. These products are made of materials which offer enhanced durability.

1229D81 - Buchi V-850/855 Vacuum Controller Valve combined with condensate trap and non-return valve with attachment for Rotavapor (not necessary with V-700/710 in stand-alone systems). 1229D82 - Buchi RC-81 remote control can be used to control the vacuum controller and the Rotavapor:…

These flasks are available in sizes from 50 to 3000 mL with different standard joints (SJ). For special applications at max. 60°C temperature, some flasks are also available with P+G coating. Flasks marked P+G are coated. The P+G coating protects against mechanical damage and provides…