Red, Ready to Ship, Supplies
-
Polypropylene Autoclavable to 275°F Meets impact strength for all 50 states Meets tear strength for all 50 states Biohazard infectious waste is typically collected at the point of generation in such places as hospital laboratory and operating areas, pharmaceutical, biological,…
-
Vinyl-covered paper tapes, backed with self-sticking, bacteriostatic adhesive Can be marked with pencil, pen or ball-point; helpful for coding of samples, etc. Tape adheres to glass, metals, polyethylene, Teflon®, wax, rubber, paper and cloth Unaffected by temperatures from -55° to +120°C …
-
Lab Bottle Carrier Bucket, Rubber
Eagle ThermoplasticsResists most aqueous solutions, acids and bases Steam sterilizable Can be used from -45° C to 110° C Centering ring holds bottle from wall Large carrier accommodates 2.5 L and 4 L bottles. Small carrier accommodates 500 mL and 1,000 mL bottles. Made from a unique, high performance,…
-
Autoclave Bags, Red
Action HealthInfectious waste is sterilized with the use of high temperature autoclave bags. Bags are ideal for processing hazardous materials up to 275°F (135°C). Imprinted with a biohazard symbol and an indicator which changes to “Autoclaved” when contents are successfully sterilized.
-
Unwire™ Test Tube Racks: Resmer™ Manufacturing Technology
Thermo Scientific NalgeneSmooth finish leaves fewer places for contaminants to lodge; no welds to break, no sharp edges. Endplates accept large labels for easy identification of samples. Higher specific gravity than water so it stays submerged in a water bath and won't float. Withstands most lab chemicals and…
-
SPECI-GARD® Bags
Minigrip®The only bag featuring the a liquid-tight, PRESS AND CLOSE® adhesive closure system. Simply peel away the release liner and press to close Separate outside pocket for the requisition slip It’s the ORIGINAL adhesive closure with NO…
-
Tufpak is the original manufacturer of Autoclave Bags to industry. Autoclaving (Steam sterilization) is the most efficient and economical wet thermal disinfection process. Hazardous waste producers in research and clinical laboratories rely on this process to continually meet their obligations to…
-
Unwire™ Half-Racks: Resmer™ Manufacturing Technology
Thermo Scientific NalgeneConstructed with Thermo Scientific™ Resmer™ Manufacturing Technology. Racks are repeatedly autoclavable. Smooth finish leaves fewer places for contaminants to lodge; no welds to break, no sharp edges. Endplates accept large labels. Rack withstands most lab chemicals and…
-
Vinyl-covered paper tapes, backed with self-sticking, bacteriostatic adhesive Can be marked with pencil, pen or ball-point; helpful for coding of samples, etc. Tape adheres to glass, metals, polyethylene, Teflon®, wax, rubber, paper and cloth Can withstand temperatures from -55° to 120°C …
-
30 mL Centrifuge Tubes and Caps
Caplugs Evergreen®30 mL centrifuge tubes are ideal for general purpose laboratory work. These tubes are especially useful as a 95kPa certified leak-proof primary container in shipping infectious specimens. The 30 mL tube with spork is also widely used in parasitology specimen transport. …
-
Labeling Tape
Diversified BiotechStrong, durable, oil & abrasion resistant, waterproof, and non-staining Great for general identification and color coding Temperature Range: -23° to +121°C Accepts marking using pen, pencil, or permanent marker Stick to most surfaces including glass, plastic, and metal …
-
Serological Pipets, Cotton-Plugged, Individually Wrapped
DWK Life Sciences (Kimble)Sterile, cotton-plugged, individually wrapped Individually wrapped in resealable plastic bags Borosilicate glass Tolerances: 1/2 mL pipet,± 0.013 mL ; 1 mL pipet, ±0.02 mL ; 5 mL pipet, ± 0.15 mL ; 10 mL pipet, ±0.3 7536T48 pipets have black markings: remaining sizes have blue markings.
-
"Banana-peel" plastic wrap features easy opening for aseptic removal and eliminates static cling when wearing latex gloves. You can see the polystyrene pipet through the clear plastic wrap for instant size identification. Plus, space saving packaging reduces storage requirements, waste,…
-
Polyethylene Super-Tack
UltraTapeUltraTape's high tack 1153 tape is ideal for any cleanroom construction application that requires a strong bond. This high adhesion, polyethylene tape is residue-free, easy to tear, and can be written on with a pen. It is offered in a variety of colors including our unique Protocol Tape version…
-
Color-coded magnifying stripe Anti-drip tip Paper/plastic wrap Lot numbers printed on each pipet wrapper Accuate to ±2% at full volume Cleanroom pack style Cleanroom pack style offers an inner dust cover liner for the carton as well as a second sealed sleeve over each…
-
Dressing Disposal/Infectious Waste Bags
Elkay PlasticsDressing Disposal These red-colored, unprinted, high-density bags are ideal for multiple uses and convenience in disposing of discarded wound-care dressings. Liner HDPE The strong bottom star-seal construction of this bag provides a measure of infection control/protection…
-
G-Tube Microcentrifuge Tube
Bio PlasNo special locking cap devices needed Over 30,000 x g without cap locks Available in 0.6 mL, 1.5 mL and 2.0 mL Safe sample deposit All three volumes available in siliconized polypropylene The cap of the G-Tube is designed so no special locking device is needed. The cap…
-
Bouffant Cap
CellucapBouffant caps should be used in full containment situations where it is necessary to prevent minute particles from reaching products or equipment. We recommend these for direct food contact or when more protection than a hairnet is needed. All of our polypropylene bouffant caps are made with latex…
-
Snap-Cap Microcentrifuge Tubes
Bio PlasThe Snap-Cap Microcentrifuge Tube gives a firm, dependable seal, and its tough virgin-polypropylene construction withstands the rugged G-forces of high-speed centrifugation. Use it with confidence for specimen collection, mixing, electrophoresis sampling/ handling, enzyme assays, radioassays,…
-
Vinyl Cleanroom Tape
Micronova ManufacturingThe Micronova Cleanroom Vinyl Tape offers a clean peel from wafer cartridges and cleanroom work surfaces and the matte finish can be written on with a cleanroom pen. Special processing and packaging techniques ensure low particles and extractable ion counts for applications in and around the…
-
Label Tape - 1" x 500"
Nev's InkNev’s Ink, Inc. Brand Labeling Tape is strong, durable, oil resistant, waterproof, and acid resistant. It can withstand temperatures from -23 to +121 degrees Celsius. (-10 to +250 degrees Fahrenheit.) Our Tape can be written on with pen, pencil, or permanent marker. Tape will stick to most…
-
Microcentrifuge Tubes in Self-Standing Bags
Globe ScientificGlobe Scientific is pleased to expand on this line of premium quality microcentrifuge tubes with attached snap caps. The polypropylene (PP) tubes are resistant to most chemical reagents and can be autoclaved at 121°C. Each tube is molded with precise graduation marks for accurate measurements.…
-
Label Tape - 1" x 2160"
Nev's InkNev’s Ink, Inc. Brand Labeling Tape is strong, durable, oil resistant, waterproof, and acid resistant. It can withstand temperatures from -23 to +121 degrees Celsius. (-10 to +250 degrees Fahrenheit.) Our Tape can be written on with pen, pencil, or permanent marker. Tape will stick to most…
-
SuperClear® Polypropylene snap cap microcentrifuge tubes with extra-large top, writing spot, and graduations. Spins to 20,000 RCF. Autoclavable. (122°C) With flat easy open attached extra large snap caps, side graduations, and frosted writing surface ATP, RNase/DNase and…
-
80-Well Microtube Racks
Heathrow ScientificPopular fraction-collector-plate style rack Easily fill and transfer 80 tubes in compact arrangement (5 x 16 array). Polypropylene rack has molded-in coordinates aid organization. Autoclavable. Assorted colors: blue, green, pink, yellow, and orange. Measures 225 x 67 x 28 mm.
-
Polyethylene Adhesion Tape
UltraTapeUltraTape 1110 is designed specifically for sealing wafer shipping boxes as well as cleanroom packaging and bag sealing. Its specially formulated medium-high adhesive leaves no residue or ghosting on plastic boxes, even after prolonged storage. The tap
-
Polyethylene Low
UltraTapeUltraTape 1114 / 0114 is a low adhesion, removable, highly conformable tape designed for cleanroom packaging and in-process work. Its high cleanliness, low outgassing, lack of residue, and excellent ability to conform to surfaces make it ideal for a wi
-
Unwire Polypropylene Test Tube Racks
Thermo Scientific NalgeneReady-to-use No assembly required Provides an unrestricted view of tubes Available in 2 sizes: 13 and 16 mm and four colors: white, blue, green and red. Do not autoclave.
-
Scienceware® No-Wire™ Round Racks
SP Bel-ArtThese No-Wire™ racks fit neatly into round containers such as ice buckets and beakers, as well as desiccators. Choose from two sizes; the large rack is ideal for use in round ice buckets such as Magic Touch™ and the small rack fits perfectly in a 1000mL beaker. Special…
-
Test Tube Peg Racks
Globe ScientificFully autoclavable Manufactured from durable reinforced polypropylene (PP) Peg design allows easy viewing of tube contents Can be used to dry inverted tubes while minimizing collection of airborne contaminants Dimensions (L x W x H): 13mm: 179 x 127 x 64mm (7" x 5" x…
-
These racks are designed to hold Labcon centrifuge tubes. Unlike foam racks, they are autoclavable and will not fall apart with repeated use. They can be frozen, and they stack together to minimize storage space. An interlocking design lets you connect more than one rack to create a handy work…