Blue, Bottles
-
labForce® Benchtop Tube Racks and Storage Boxes
labForce® (powered by Thomas Scientific)labForce® benchtop tube racks and storage boxes are available in a variety of popular configurations. Racks and boxes are available to hold or store tubes from 0.1mL to 500mL.
-
Tube Rack
MTC BioThese compact, convenient 80 well racks are designed to keep your tubes neatly and efficiently organized. They are compatible with conical and self-standing microtubes and all wells have raised, molded numbers for quick identification. The bottom of each well has been recessed to improve conical…
-
16 - 17mm, 60-Place Polypropylene Test Tube Racks
Globe ScientificDimensions: 246 x 105 x 72mm Racks are shipped flat for easy storage Easy to assemble: simply fold and snap together securely Racks are Autoclavable at 121°C for 20 minutes Can be used dry, wet or in water baths and will not float Special design allows…
-
Clinical 4-Way Tube Racks
Heathrow ScientificThe Clinical 4-Way Tube Rack is the only tube rack specifically designed to hold round, flat & conical blood collection and culture tubes. It holds multiple tube sizes without multiple racks.
-
Serological Pipets, Cotton-Plugged, Individually Wrapped
DWK Life Sciences (Kimble)Sterile, cotton-plugged, individually wrapped Individually wrapped in resealable plastic bags Borosilicate glass Tolerances: 1/2 mL pipet,± 0.013 mL ; 1 mL pipet, ±0.02 mL ; 5 mL pipet, ± 0.15 mL ; 10 mL pipet, ±0.3 7536T48 pipets have black markings: remaining sizes have blue markings.
-
Disposable, sterile, PYREX® canister pack Calibrated "to deliver" Packaged in a flip-top canister to keep the pipets racked Sealed in polyethylene bags for sterility
-
Wireless Tube Racks, Half Size
Globe ScientificFully autoclavable Molded from reinforced nylon for strength and durability with no coatings to chip, peel, or rust Single piece, three tier grid design for secure and stable racking of tubes Good temperature and chemical resistance to withstand a variety of lab procedures Large, flat…
-
MCT/PCR Rack
SP Bel-ArtPerfect for benchtop use or freezer storage, this compact, double-sided polypropylene rack accommodates 0.2ml thin-walled PCR tubes on one side while the opposite side holds 1.5ml to 2.0ml microcentrifuge tubes. 80 wells on each side keep tubes upright in a 5 x 16 array and are numbered for …
-
Unwire™ Test Tube Racks: Resmer™ Manufacturing Technology
Thermo Scientific NalgeneSmooth finish leaves fewer places for contaminants to lodge; no welds to break, no sharp edges. Endplates accept large labels for easy identification of samples. Higher specific gravity than water so it stays submerged in a water bath and won't float. Withstands most lab chemicals and…
-
Floating Foam Tube Racks
Heathrow ScientificFloat in small baths as well as large vessels Brightly-colored, high-density polyethylene foam racks are ideal for floating tubes in water baths, tubs, or beakers. Closed-cell foam resists water absorption so racks can be washed and reused. The blue round rack features unique…
-
80-Well Microtube Racks
Heathrow ScientificPopular fraction-collector-plate style rack Easily fill and transfer 80 tubes in compact arrangement (5 x 16 array). Polypropylene rack has molded-in coordinates aid organization. Autoclavable. Assorted colors: blue, green, pink, yellow, and orange. Measures 225 x 67 x 28 mm.
-
Bel-Art® Poxygrid Test Tube Racks
SP Bel-ArtChoice of Four Colors and Multiple Sizes Chemical and corrosion-resistant steel wire racks are coated with heat-cured epoxy. Orange racks can be used for biohazard warning, yellow for radioactive warning. Epoxy coatings are unaffected by organic solvents, salts, weak acids and weak…
-
Biotube System
SimportMicrotiter format rack and tube system Resistant to most research chemicals Autoclavable up to 100 times Can be stored in temperatures as low as -80°C Holds tubes in an 8 x 12 format Ideal for all PCR applications: EIA, RIA, cell harvesting, etc. All components are…
-
BioTube™ Rack
SimportMade of polypropylene. The T100 BIOTUBE™ rack with standard 96-well on center spacing of tubes offers a color coding system using colored interchangeable plastic grids. These are used as a support for the 1.2 ml tubes. This unique grid stands on four legs and can be removed from the base of…
-
Switch-Grid™ Test Tube Racks
SP Bel-ArtThis innovative, split-frame rack holds up to two different size tubes in the same rack and allows users to quickly switch grids to hold other sizes as needed. Each rack frame includes a set of grids in one size. Grid sets in alternate sizes can be purchased separately. 10mm to 30mm…
-
"Banana-peel" plastic wrap features easy opening for aseptic removal and eliminates static cling when wearing latex gloves. You can see the polystyrene pipet through the clear plastic wrap for instant size identification. Plus, space saving packaging reduces storage requirements, waste,…
-
Microtube Tube Racks
Heathrow ScientificReinforced nylon tube racks offering superior chemical and heat resistance over most other plastic based racks. Handles provide easy and safe transportation and allow racks to be stacked Two formats available for smaller and larger requirements Temperature range -40°C to…
-
Serological Pipettes
BiologixConstructed of highly transparent prime virgin polystyrene Available in 1ml, 2ml, 5ml, 10ml, 25ml, 50ml volumes, each volume is labeled with a different color Ascending and descending graduations, Filter at the top of each pipette prevents damage to pipettors Non-pyrogenic, non-cyotoxic;…
-
Open Ended Pipettes
Argos TechnologiesOpen ended pipettes are just like the standard individually wrapped pipettes, but without the tip. The wide end opening is ideal when pipetting thick or viscous liguids, liquids that contain particulates which could block a standard tip pipette, or in applications where speed is critical. Supplied…
-
Abdos Combination Rack
Foxx Life SciencesThese multi combination racks made of high-quality Polypropylene (PP) have a unique rotate and lock design that allows you to choose the size of the rack according to your needs. These fully autoclavable racks can withstand temperature range of -80 °C to 121°C and can accommodate tubes of various…
-
1-Well Racks
Heathrow ScientificKeep single tubes upright in confined spaces Select among our three one-well racks--epoxy-coated steel wire racks, friction-fit polystyrene racks, or interlocking polypropylene racks. The autoclavable, epoxy-coated steel wire rack provides more friction with the benchtop for more secure…
-
96-Well Reversible Rack
Heathrow ScientificEasy-to-grasp tabs for sample handling and storage Flip polypropylene rack from 96 wells for 0.5 mL tubes on one side to 96 wells for 1.5/2.0 mL tubes on the other side. Wells are arranged in standard 8 x 12 array. Handy lid snaps into place via tabs on each end of rack. 0.5 mL wells are…
-
Wire Racks for Centrifuge Tubes
Heathrow ScientificSturdy racks for transport or sample handling These compact chemical-resistant, epoxy-coated steel wire racks have a slotted bottom for better drainage and handling. Ideal for conical centrifuge tubes but can be used to hold other types and sizes of tubes. The 15 mL rack has 20 mm holes; 50 mL…
-
Multi-Use Universal Vial Rack™ System
J.G. FinneranIncreased spacing allows the user to pipet samples or attach caps without removing the vials from the rack. Available 5 per case.
-
Rack, reversible
labForce® (powered by Thomas Scientific)These reversible racks are designed to keep 0.5mL and 1.5mL( up to 2.0mL) microcentrifuge tubes organized and upright. Made of polypropylene, choose the blue rack for 60 tube capacity (5 rows of 12 tubes) or the larger orange rack for 96 tube capacity (8 rows of 12 tubes). Both racks have…
-
Test Tube Peg Racks
Globe ScientificFully autoclavable Manufactured from durable reinforced polypropylene (PP) Peg design allows easy viewing of tube contents Can be used to dry inverted tubes while minimizing collection of airborne contaminants Dimensions (L x W x H): 13mm: 179 x 127 x 64mm (7" x 5" x…
-
-
Scienceware® Floating Cryotube Rack
SP Bel-ArtPolypropylene Autoclavable 20 places Rack accepts 12mm tubes Rack can be used for holding cryotubes during work or incubation. It floats in water and can be used for quickly thawing frozen cells in a water bath. Rack has handle for easy handling. The filled rack unloads easily by…
-
96-Well PCR® Racks
Heathrow ScientificRemovable hinged lid lies flat Perfect for pre- or post-PCR sampling. Sturdy polypropylene rack accommodates individual tubes or strips of 8 or 12 tubes. Tube wells are easily identified with embossed numbers and letters. Available in natural, single colors, or assorted colors (one each of…
-
Interlocking Glove Rack
Argos TechnologiesInterlocking wire glove racks are made from epoxy coated steel. Wire stoppers on the racks prevent boxes from slipping out, which means these racks can be placed vertical or horizontal. Interlocking glove racks are supplied with screws, and are designed to fit most major brands of gloves. 10-1/4 x…
-
Scienceware® No-Wire™ Test Tube Racks
SP Bel-ArtGreat alternative to wire racks Stackable Available for 6 standard tube diameters Available in 3 colors Dimensions: 246mm x 104mm x 64mm high (9.7" x 4.1" x 2.5") Autoclavable at 121°C (250°F) Rugged racks are molded of autoclavable polypropylene. Footprint dimensions…