Supplies, Buchi
-
The Buchi inlet valve is one of the main accessory of rotavapor and is compatible to use with Rotavapor R-220 EX. This valve provides good connection and ensures an efficient operation.
-
The Multivapor is a compact 6 position parallel vortex evaporator that is designed to optimize existing personal process workflows. When used in combination with the Rotavapor a unique increase in functionality is observed, as is an expansion of synergy with an impressively small footprint. In the…
-
Manual vacuum regulation can also be a very cost-effective solution. Air is drawn in through a fine regulation valve and the resulting vacuum is set. A manometer displays the pressure. The recommended Woulff bottle acts as a buffer vessel and condensate trap.
-
1230D81 - Buchi R-210 Rotavapor Vapor Duct, 29/32 for A-Condenser. Prevents cross-contamination and is particularly easy to dismantle and clean. The vacuum seal is manufactured from PTFE composite material and provides long service life with effective sealing. 1230D82 - Buchi R-210…
-
The Buchi type s condenser assembly comes with a cooling coil and a cold trap and is used with Multivapor™ evaporators. The combination of plastic and glass coating provides added strength.
-
For small - medium sized test quantities that need to be dried quickly and carefully, using a method that can be reproduced. Substances can also be distilled, sublimated or freeze dried. A glass tube with an electrically conductive coating serves as the heating element. The transparent sample area…
-
The BUCHI accessory is suitable for use with Rotavapor® or Multivapor™ evaporator unit models or with Sepacore® flash system models. You can choose ideal replacement part or accessory which ensures smooth functioning of evaporator units. These products are made of materials which offer enhanced durability.
-
Multivapor™ Evaporator
BuchiThe Multivapor™ is a compact 6 or 12 position parallel vortex evaporator, designed to optimize existing personal process workflows. Achieves high efficiency for multiple sample evaporation at an impressive small footprint and an easy operation.
-
Multivapor™ Evaporator
BuchiThe Multivapor™ is a compact 6 or 12 position parallel vortex evaporator, designed to optimize existing personal process workflows. Achieves high efficiency for multiple sample evaporation at an impressive small footprint and an easy operation.
-
Multivapor™ Evaporator
BuchiThe Multivapor™ is a compact 6 or 12 position parallel vortex evaporator, designed to optimize existing personal process workflows. Achieves high efficiency for multiple sample evaporation at an impressive small footprint and an easy operation.
-
The Buchi glass body assembly is one of the main accessory of rotavapor and is compatible to use with Rotavapor R-220 EX. Strong glass construction provides added durability and ensures good impact resistance.
-
FlashPure EcoFlex cartridges are packed with quality silica designed to help maximize cost and performance on any flash purification instrument. Large selection of cartridge sizes Several stationary phases available Luer lock inlet and Luer slip outlet Non-RFID suitable on any…
-
The Buchi SVL 15 seal is one of the main accessory of rotavapor and is compatible to use with Rotavapor R-220 EX. This seal prevents any leakages and keeps the contents safe, sold as 5 per set.
-
Vacuum Pump V-700/710 compact high performance condensers for producing maximum condensation of residual solvent vapor after the pump. At the same time it separates any liquid solvent from the pump, putting it directly into the receiving flask. Insulation sleeves prevent the formation of…
-
The BUCHI accessory is suitable for use with Multivapor™ evaporator unit models. You can choose ideal replacement part or accessory which ensures smooth functioning of evaporator units. These products are made of materials which offer enhanced durability.
-
Convenient and efficient rotary evaporation The R-300 meets the highest expectations in convenience and versatility. Its modular design allows extension of the Rotavapor® R-300 to a fully integrated system where a central interface regulates each component. Your most important…
-
The Buchi foam detector is one of the main accessory of rotavapor and is compatible to use with Rotavapor R-250 and R-250 EX. This detector helps in minimizing the moisture content in the device.
-
The dry air supply supplies particle free dry air on demand for the evaporative light scattering detector (ELSD) system of a Chromatography system. The operation of the dry air supply is controlled by the Chromatography system software. A triggering signal is supplied to the dry air supply which in…
-
The BUCHI accessory is suitable for use with vacuum controller, heating baths or evaporator unit models. You can choose your ideal replacement part or accessory which ensures smooth functioning of units. These products are made of materials which offer enhanced durability.
-
The Buchi seal holder is one of the main accessory of rotavapor and is compatible to use with Rotavapor R-220 EX. This seal prevents any leakages and keeps the contents safe.
-
Multivapor™ Evaporator
BuchiThe Multivapor™ is a compact 6 or 12 position parallel vortex evaporator, designed to optimize existing personal process workflows. Achieves high efficiency for multiple sample evaporation at an impressive small footprint and an easy operation.
-
The Buchi manual flask holder is one of the main accessory of rotavapor. The large design of the holder has the capacity to hold up to 20 Liter flasks.
-
These flasks are available in sizes from 50 to 3000 mL and come with ball joint KS-35. All flasks are also available with P+G coating. The P+G coating protects against mechanical damage and provides efficient protection against glass splinters in the event of a breakage.
-
The efficient way of cooling The Recirculating Chiller F-305 / F-308 / F-314 are specifically designed to work with laboratory equipment such as rotary evaporators, parallel evaporators, Kjeldahl, and extraction products. You benefit from convenient central temperature setting, energy-saving…
-
Fitting to your needs and environment The Pure chromatography instruments are extremly compact, ensure safety on the highest level and are easy to use for any flash or prep HPLC application. The platform has been designed to protect you and your sample and to get more purification in a very…
-
Simple menus and programs are easy to navigate on the intuitive LCD display, with either manual or automatic, real time video instrument. • For determination of melting and boiling points • Calibration in the field is easily accomplished with an intuitive step-by-step process …
-
The Buchi type c condenser assembly comes with a cooling coil and a cold trap and is used with Multivapor™ evaporators. The combination of plastic and glass coating provides added strength.
-
Interface I-100
BuchiThe I-100 is an easy to use interface that controls the vacuum digitally. It is optimally suited to on/off-regulate the Vacuum Pump V-100. 1190U96 Compatibility Pack: For V-100 and V-700/V-710, with support set, communication cable, power pack, valve unit not included. Vacuum…
-
Cover Heating Bath B-491
BuchiTwo heating baths are available for the Rotavapor R-210 and R-215. With a heating capacity of 1300 W, they provide enough energy for a fast distillation. The mayor differences between the bath B-491 and B-495 are the bath size and temperature range. The B-491 can be used as a water and oil bath up…
-
Vacuum Pump V-100
BuchiThe Vacuum Pump V-100 is an economical and chemically resistant PTFE diaphragm vacuum pump with a space saving design. It covers the essential needs in vacuum generation. On/offregulated by the Interface I-100, it is optimally suited to work with the Rotavapor® R-100. The ready to use vacuum…
-
The BUCHI accessory is suitable for use with melting and boiling point instruments. You can choose your ideal replacement part or accessory which offers smooth functioning of the models. These products are made of materials which ensure long lasting life.