Protein Purification Chromatography Media
-
CultureTemp™ 37°C Warming Plate
SP Bel-ArtIncrease cell viability during cell passaging with this highly accurate warming plate that keeps cells at an optimal 37°C (±°C ) outside of the incubator. The unit is water resistant and safe for cleaning with Ethanol or IPA. UL approval pending. Keep dishes outside the…
-
Temperature Probe PT100
KinematicaFor POLYTRON® PT 3100 D and PT 6100 D, for measuring the product temperature. Probe can be directly connected to the rear panelof the device. Temperature range is displayed on LCD display with a range of 0°C to 120°C If the temperature probe is used with the PC software, you…
-
Digital Hotplates, Stirrers and Hotplate Stirrers
labForce® (powered by Thomas Scientific)New and Improved Features: Larger top plate (7 x 7") Higher temperature range (up to 400°C) Larger stir capacity (up to 5L) More powerful and reliable heating element Molded aluminum base/housing labForce® hotplates, stirrers, and hotplate stirrers…
-
This module kit includes: External Spray Chamber, Qty. 1 (N0791499) Inner Chamber for External Ryton/Type II Spray Chamber, Qty. 1 (N0582258) 2 mm I.D. Alumina Injector, Qty. 1 (N0791183) 1-Slot Quartz Torch, Qty. 1 (N0790131) End Cap Assembly for GemTip Cross-Flow Nebulizer, Qty. 1 (N0780546)…
-
Protector® Premier® Laboratory Hoods
LabconcoProtector® Premier® Laboratory Hoods incorporate a sleek interior with a molded one-piece fiberglass liner, the signature feature of Labconco’s leading line of fume hoods since 1961. The one-piece liner of specially-formulated, fiberglass-reinforced polyester offers corrosion and fire resistance…
-
BeadBug™ 3 Position Bead Homogenizer
Benchmark ScientificThe BeadBug™ is a high energy benchtop homogenizer that sets the performance standard for personal sized cell disruption and lysis instruments. Simultaneous homogenization of up to 3 samples takes place (often within 45 seconds) inside the disposable 2ml screw cap microtubes. The…
-
myTemp™ Mini CO2 Incubators
Benchmark ScientificAt only 13 inches wide, the myTemp Mini CO2 incubator is the smallest and most economical incubator for applications requiring CO2 gas control. Its small footprint makes the incubator ideal for use inside of biological safety cabinets, isolating sensitive cultures or for any laboratory simply…
-
PRO Quick Connect® Homogenizer Generators
Pro ScientificThomas No. 1204B80 Recommended for 0.5ml,1.5ml, and 2ml tubes Best used with sample volumes below 0.4ml Compatible with all homogenizer models Thomas No. 1204B81 Recommended for 1.5ml, 2ml, and 5ml tubes Volume of 0.4ml or above within 1.5ml tube Compatible…
-
Aluminium Blocks
Stuart (Cole-Parmer)For use with Stuart® block heaters. Manufactured from anodised aluminium and all with a separate hole to accommodate a thermometer if desired. For accurate thermometer measurements please check your thermometer has a suitable immersion depth. All blocks* have dimensions (w x d x h) of 75 x 95 x…
-
Compact Crescent Ice Machine features a field reversible door and a front ventilation system so there is no need to have clearance around the top and sides of the unit. Ideal for counter top or under counter use Minimizes water usage, only 3 gallons average daily rate On/Off switch…
-
3' Nexus Horizontal Clean Bench. 21" deep work area with standard interior. Features laminar, ISO Class 4 airflow, intelligent OS with 5” touchscreen and an ECM motor with CAP™ Technology.
-
ST Series CO2 Incubators
Benchmark ScientificPrecision temperature control, 6-sided heating Precise monitoring over CO2 with dual beam IR sensor Seamless, stainless-steel chamber Digital control of humidity percentage (PLUS models only) With our unique and proprietary heat distribution technology, the Benchmark ST…
-
Large External-Controlled Hotplates
BarnsteadUniform heating of large volumes and multiple vessels External controller operates outside fume hoods Robust design for safety; large capacity with excellent temperature stability Porcelain-coated, stainless-steel top and case offer chemical and stain…
-
Torch Injector Tube Fitting
Agilent TechnologiesThe Agilent Technologies torch injector tube fitting has a strong construction and is compatible to use with PerkinElmer instruments. Application: PerkinElmer ICP-MS This product is only available to U.S. Domestic Customers. For research use only, not to be used in diagnostic procedures.
-
Cimarec Basic Stirring Hot Plates
Thermo ScientificCombines unsurpassed performance with a sleek, rugged design. Choose from a 4” x 4” (10.2 x 10.2 cm) or 7” x 7” (17.8 x 17.8 cm) top plate sizes New top plate design reduces chance of breakage Updated body direct spills away from main components Fast heating time…
-
DI800 Dry ice Machine is the latest design in bench-top dry ice making. Utilizing a patented heat exchange technology provides up to 30% better yield from a standard 50 lb. CO2 cylinder (with siphon). No need to dismantle machine to retrieve dry ice block, Simple 1 Lever Operation! Save…
-
6' Nexus Horizontal Clean Bench. 21" deep work area with standard interior. Features laminar, ISO Class 4 airflow, intelligent OS with 5” touchscreen and an ECM motor with CAP™ Technology.
-
8' Nexus Horizontal Clean Bench. 21" deep work area with standard interior. Features laminar, ISO Class 4 airflow, intelligent OS with 5” touchscreen and an ECM motor with CAP™ Technology.
-
MH6616 Slide Drying Bench
Electrothermal (Cole-Parmer)The Slide Drying Bench aids in the preparation of microscope slides at the specimen mounting stage. It complements both the Paraffin Wax Dispenser and the Paraffin Wax Mounting Bath to provide a complete set of paraffin wax sampling equipment for the modern laboratory. Accepting up to 50…
-
Micro Tube Homogenizer System
SP Bel-ArtThe Micro Tube Homogenizer System features an advantaged micro tube that is specially matched to a micro pestle which provides the tightest tolerances between the tube wall and the pestle. Use with the hand-held Homogenizer Motor for optimal processing efficiency particularly when handling large…
-
Introducing the first-to-market, certified cleanroom compatible CO2 Incubator, 3rd party validated to be appropriate for use ISO Class 5 and GMP grade A/B environments in accordance with ISO 14644-1. Featuring next-level particulate and contamination control, increased compatibility with cleaning…
-
24 x 2mL All-Metal QuickPrep™ Sample Holder
MP Biomedicals24 x 2 mL All-Metal QuickPrep™ Sample Holder is the strongest FastPrep adapter used for lysing highly contagious samples and samples suspected of harboring prions. Due to its ability for high temperature sterilization, this adapter is the safest solution for CNS tissue lysis and other…
-
Injector Assembly
Agilent TechnologiesThe Agilent Technologies 2 mm injector assembly with twisting capability is made from PFA-platinum material that ensures a smooth flow of liquid. Application: For ELAN DRC-e/9000/6x00/5000/500/NexION, PerkinElmer ICP-MS This product is only available to U.S. Domestic Customers. For…
-
Ductless Fume Hood Air Flow Monitor
Air Science USA, LLCElectronic airflow monitoring assures continuous safety. An electronic gas sensor monitors carbon filter performance.
-
AC600 Series Ductless Chemical Fume Hoods
AirClean® SystemsDesigned to provide a low cost chemical hood solution for protection of the operator and environment from toxic vapors, gases, fumes, and particulate. The AC600 Series ductless chemical workstation features the use of molded thermoplastics configured for a variety of common applications. Smaller in…
-
Torch Injector
Agilent TechnologiesAgilent ICP-OES injectors for fully demountable torches are guaranteed to fit with your Agilent instrument. ICP-OES injectors are available in quartz and alumina with a variety of inner diameters (0.8mm, 1.4mm, 1.8mm, 2.4mm) to meet your application needs. Analysis of organic solvents require…
-
Ergo Freeze Cooling Blocks
4titudeMaintain your PCR samples at 4°C for up to 2.5 hours The SBS-sized cooling blocks, available in pink and yellow, are the perfect PCR accessory. Once frozen for 8 hours at -20°C, they turn from pink to purple or from yellow to green, respectively, and maintain a temperature of 4°C…
-
Shaking Incubator
Techne (Cole-Parmer)Combined incubator shaker Digital display for temperature and speed Integrated timer Unique retractable platform for easy loading and unloading Angle adjustable accessory tube racks, with patent pending Magnalock coupling system available Coms enabled for external temperature…
-
3' Nexus Horizontal Clean Bench. 26" deep work area with standard interior. Features laminar, ISO Class 4 airflow, intelligent OS with 5” touchscreen and an ECM motor with CAP™ Technology.
-
Designed with microprocessor-controlled dual thermocouples, these stirring hot plates offer you accurate temperature control and protection from overheating. The analog models feature a colored LED indicator which surrounds the heat control knob illuminating the actual surface temperature in real…
-
Aura® Elite Ductless Fume Hoods
Mystaire®Constant Monitoring of Temperature and Humidity Mystaire® ductless fume hoods are self-contained, filtered enclosures that remove hazardous fumes, vapors and particles from virtually any laboratory application. Unlike traditional fume hoods there are no installation costs and no ductwork…
-
CellXpert® C170i
EppendorfThe CellXpert® CO2 incubator family are the first cell culture incubators engineered and produced by Eppendorf in Hamburg, Germany. They were designed with the needs of modern industrial and academic cell culture labs in mind - to reduce time-to-market or publication with minimal efforts and…