The Agilent Technologies short extension lead has an easy-to-use and durable design and is perfect for mounting the probe outside the sample compartment. This product is only available to U.S. Domestic Customers. For research use only, not to be used in diagnostic procedures.

Deuterium and Visible source lamps provide good intensity over the widest possible wavelength range, plus optimum stability to ensure the best performance with Agilent UV-Vis and UV-Vis-NIR systems. They are selected by our QC process to ensure the optimum lifetime. Application: For Cary…

Quartz, stoppered with PTFE stopper supplied, top section of the cell features two self-masking black walls and two translucent side walls, The sample compartment optimizes the alignment of the sample for maximum sensitivity. Sample is easily inserted into and retrieved from the cell using a…

Replaceable probe tip, Torlon, 20mm pathlength. 7.9 mm diameter. Suitable for use with the Torlon probe body (p/n 7910032600) or the Torlon fiber optic dip probe with the replaceable tip (p/n 7910035100). The tip is suitable for operation in temperatures up to 200 °C. Application: For Use With the…

Agilent Technologies products are intended for sale/shipment within the US only. International customers should contact their local Agilent Technologies distributor to place orders for Agilent Technologies products.

The Agilent Technologies PCI interface card is suitable for use with Agilent Cary 50 UV-Vis spectrophotometer. Application: For Agilent Cary 50 UV-Vis Spectrophotometer This product is only available to U.S. Domestic Customers. For research use only, not to be used in diagnostic procedures.

Agilent Technologies products are intended for sale/shipment within the US only. International customers should contact their local Agilent Technologies distributor to place orders for Agilent Technologies products.

Agilent Technologies products are intended for sale/shipment within the US only. International customers should contact their local Agilent Technologies distributor to place orders for Agilent Technologies products.

Optimize performance and maximize efficiency with supplies for the sample handling accessories used with Cary UV systems. These ensure the perfect fit to ensure the optimum productivity and reduced errors caused by manual cell handling. Application: For Cary 4000/5000/6000i This product is only…

Replaceable probe tip, Torlon, 40mm pathlength. 7.9 mm diameter. Suitable for use with the Torlon probe body (p/n 7910032600) or the Torlon fiber optic dip probe with the replaceable tip (p/n 7910035100). The tip is suitable for operation in temperatures up to 200 °C. Application: For Use With the…

The Agilent Technologies temperature probe holder is suitable for use in 10 mm standard rectangular cuvettes. Application: For Use in Standard 10 mm Rectangular Cuvettes This product is only available to U.S. Domestic Customers. For research use only, not to be used in diagnostic procedures.

The Agilent Technologies plate hose adaptor is suitable for use with cary extended sample compartment. Application: For Cary Extended Sample Compartment This product is only available to U.S. Domestic Customers. For research use only, not to be used in diagnostic procedures.

Agilent top-quality ICP-OES peristaltic pump tubing allows you to find the appropriate product to handle any matrix. Agilent has tubing in the diameters and material required for your application: PVC, Solvaflex, FPM, or Marprene. Standard PVC works for all aqueous with medium concentrated acids or…

The Agilent Technologies IEEE cable cover is useful for the analysis, diagnostics, calibration and monitoring of various chemical samples in laboratories and research facilities. This product is only available to U.S. Domestic Customers. For research use only, not to be used in diagnostic procedures.

The Agilent Technologies deuterium UV lamp is mainly used in the process of spectroscopy to maintain a continuous spectrum throughout. The low-pressure gas-discharge design ensures durability. This product is only available to U.S. Domestic Customers. For research use only, not to be used…

Agilent Technologies products are intended for sale/shipment within the US only. International customers should contact their local Agilent Technologies distributor to place orders for Agilent Technologies products.

Agilent Technologies products are intended for sale/shipment within the US only. International customers should contact their local Agilent Technologies distributor to place orders for Agilent Technologies products.

The Agilent Technologies 99% reflectance standard spectralon is used for diffuse reflectance in DRA-CA-30I diffuse reflectance accessory. Application: For Diffuse Reflectance, DRA-CA-30I This product is only available to U.S. Domestic Customers. For research use only, not to be used in…

Spectralon 99% reflectance standard, calibrated, for diffuse reflectance, 2 inch diameter, in durable Delrin holder with protective cover. Application: For Diffuse Reflectance, in Durable Delrin Holder With Protective Cover This product is only available to U.S. Domestic Customers. For…

Optimize performance and maximize efficiency with supplies for the sample handling accessories used with Cary UV systems. These ensure the perfect fit to ensure the optimum productivity and reduced errors caused by manual cell handling. This product is only available to U.S. Domestic Customers. …

Magnetic stir bars or star type stirrers provide uniform and thorough mixing of samples in cuvettes. The stir bars are recommended for the stirring module and Peltier thermostatted (1 x 1) cell holder. The star stirrer is recommended for Peltier thermostatted multicell holders for Cary UV-Vis…

Spacers are required to hold cells with an outer depth of less than 12.5 mm in the cell holder. For use with Agilent 89054A cell-stirring multicell transport and Agilent 89090A Peltier temperature controller. Stirring bars are used with cells having internal dimensions of 10 x 10 mm (W x D)…

The Agilent Technologies rectangular cell holder comes with cell lifter and cell height adjustment screws. This cell holder is compatible to use with Cary spectrophotometers. This product is only available to U.S. Domestic Customers. For research use only, not to be used in diagnostic procedures.

Semi-micro and micro cells have an inner width of 4 mm to 2 mm. The thickness of the base is 9 mm. All semi-micro and micro cells are for use with spectrophotometers having a beam height of 15 mm. For applications with a wave length range of interest in the visible range use our low cost Agilent…

Quartz, open top with PTFE lid supplied, self-masking black walls, Compatible with Agilent Cary 50/60, Cary 100/300 and Cary 4000/5000/6000i/7000 UV-Vis spectrophotometers. This product is only available to U.S. Domestic Customers. For research use only, not to be used in diagnostic procedures.

The Agilent Technologies cuvette holder is suitable for use with external diffuse reflectance accessory (DRA) for Agilent cary 4000/5000/6000 UV-Vis system. Application: For External Diffuse Reflectance Accessory (DRA) For Agilent Cary 4000/5000/6000 UV-Vis This product is only available to U.S.…

The Agilent Technologies toluene/hexane resolution test kit is suitable for use with UV systems. Application: For UV This product is only available to U.S. Domestic Customers. For research use only, not to be used in diagnostic procedures.

Agilent Technologies products are intended for sale/shipment within the US only. International customers should contact their local Agilent Technologies distributor to place orders for Agilent Technologies products.

Agilent offers a range of cell holders, providing you with the ability to analyze a wide variety of samples. Standard, cylindrical, long pathlength, and variable pathlength cell holders, bases and test tube holders are all available for Agilent UV-Vis and UV-Vis-NIR systems. Application: For…

Agilent offers replacement tubing spares and kits for the Cary UV-Vis spectrophotometer systems. These allow you to replace peristaltic pump tubing and inlet/outlet connections for flow cells to help you keep your system operating at peak performance. This product is only available to U.S.…

Test tube holder, for using 16mm od test tubes in sample compartment instead of conventional cuvettes, for Cary 50/60 only. Application: For Using 16mm OD Test Tubes in Sample Compartment Instead of Conventional Cuvettes, For Cary 50/60 Only, UV-Vis & UV-Vis-NIR This product is only available to…

Allows reflectance measurements of powdered samples and samples. Mounts on the standard sample holder against the reflectance port. Includes a prepacked PTFE powder cell for use as a reflectance standard and an empty powder cell holder for sample. Sample is retained by a plunger. Application: For…