Wipers, Non-Sterile, White
-
TekniMax ™ EX Knitted Microfiber Heavy-weight and durable, TekniMax™ EX utilizes a proprietary weaving pattern to create pillowed loops of sweeping power to efficiently wipe away micro-contamination from even the roughest surfaces. APPLICATIONS Best choice for…
-
Teknisat nonwoven wipes are made from a hydroentangled of 55% cellulose / 45% polyester which creates a strong, clean & absorbant wiper. Saturated with 70% Pure Isopropry Alcohol & 30% 18Mohm DI water in precise saturation level provide excellent wipe down/pick up with economy in mind. This…
-
Clorox 30358 Healthcare Bleach Germicidal Wipes (110 Count), 12" x 12"
Essendant ReceivablesFastest: EPA-registered to kill C, difficile spores in 3 minutes Proven: reduces the transmission of C, difficile spores, supported by clinical studies Recommended: meets CDC, SHEA and APIC recommendations for killing C, difficile spores Results: when used as part of a bundled disinfecting…
-
Extremely soft polypropylene and pure IPA bring wet wiping to delicate, scratch-sensitive surfaces. With high resistance to acids and many chemicals, these wipes are excellent for removing residues from surfaces and general wet wiping. Recommended for ISO 5-8 critical environments. Features …
-
Sterile Presat Wiper Validated Sterile by Gamma Irradiation Nonwoven Polyester Fabric 9"x9" Double Bagged
-
PROSAT® Sterile™ Polynit Heatseal LE Wipes are made of 100% knitted polyester Polynit Heatseal, presaturated with a blend of 70% isopropanol and 30% water for injection (WFI). Each lot is tested before release and low endotoxin certified to less than <1EU/wipe. The sealed edge…
-
-
TechniSat incorporates a pre-wetted fabric blend of nonwoven hydroentangled 55% cellulose and 45% polyester. This fabric combines the highly absorbent properties of a natural fiber with the cleanliness and strength of a synthetic fiber. It offers low particle counts, low extractable levels and…
-
PROSAT® Polynit Heatseal Wipes are manufactured from 100% knitted textured polyester with laser-cut sealed edges for very low levels of particles and fibers. Polyester wipes are chemically resistant and exceptionally low in particles and fibers. An interlock knit creates a durable fabric, the…
-
PolySat incorporates soft, 100% melt-blown polypropylene substrate pre-wetted with a 0.2 ë_m filtered, 70% isopropyl alcohol/30% deionized water solution. Packaged in resealable flexpacks or flip-top tubs, PolySat is convenient for cleaning sensitive surfaces in controlled environments. …
-
TekniClean ™ LX Polyester Knit Wipers Available in cleanliness levels for ISO 4 and higher cleanrooms with edge finishes suitable for a wide range of applications. TekniClean™ LX is made via an Ultra-Clean proprietary manufacturing process that reduces the potential for shedding…
-
Pre-Wetted Wipers
ValutekValutek’s pre-wetted spunlace non-woven wiper is composed of a hydro entangled, nonwoven blend of 55% cellulose and 45% polyester pre-wetted with a blend of isopropyl alcohol and DI water. The pre-wetted format enhances the wipers absorbent capacity, effectiveness, and reduces airbone…
-
TekniClean ™ LX Polyester Knit Wipers Available in cleanliness levels for ISO 4 and higher cleanrooms with edge finishes suitable for a wide range of applications. TekniClean™ LX is made via an Ultra-Clean proprietary manufacturing process that reduces the potential for shedding…
-
Ultralow particle, sealed-border cleanroom wipers pre-wetted with IPA in one convenient package QuanSat™ with IPA incorporates ITW Texwipe's ultraclean Vectra QuanTex™ sealed-border wipers pre-wetted with various concentrations of semiconductor-grade isopropyl alcohol (IPA) in easy-to-use,…
-
FREE-SAT™ ULTIMATE 70™ Pre-Saturated Polyester Wipers
High Tech ConversionsSealed edges Cleanroom Class 10 (ISO Class 4) 100% Polyester Pre-saturated in 70% IPA/30% DI Water FREE-SAT ULTIMATE 70™ pre-saturated wipers are made of 100% polyester. These wipes have heat sealed edges. A laser beam cuts and melts each fiber along the edges, eliminating…
-
Fogtech Instant Anti-fog Wipe
MotoSolutionsFogtech DX is targeted specifically to prevent fogging on today's high tech plastics and glass. It quickly provides crystal clear vision through safety goggles, glasses, prescription glasses or face shields. Ideal when conditions for fogging are severe. The Single Step Application is…
-
With the benefits of a critically clean nonwoven and the all-purpose concentration of 70% IPA, these wipes are versatile and dependable. Packaged in a convenient resealable pouch, a range of wet wiping tasks become more cost effective and efficient. Recommended for ISO 5-8 controlled environments. …
-
TekniZorb ™ LXS Meltblown Polypropylene TekniZorbTM LXS offers a very low-shedding wiping solution to deposit IPA while effectively removing residue from the surface in your controlled environment. APPLICATIONS Ideal for efficient surface cleaning and sanitization between…
-
Pre-Wetted Wipers
ValutekValutek’s pre-wetted polyester wiper is composed of 100% continuous-filament polyester fabric pre-wetted with a blend of isopropyl alcohol and DI water. The pre-wetted format enhances the wiper’s absorbent capacity, effectiveness, and reduces airborne contamination from traditional…
-
Combining the benefits of validated sterility, a clean nonwoven and the all-purpose concentration of 70% IPA, these wipes are versatile and dependable. Packaged in a convenient resealable pouch, a range of wet wiping tasks that require validated sterility become more cost effective and efficient.…
-
These PROSAT® Sterile™ Theta™ Wipes are manufactured from a lightweight hydroentangled cellulose/polyester and saturated with a solution of 70% USP grade IPA and 30% deionized water. A cost effective wipe ideal for transfer disinfection and general cleaning, PROSAT®…
-
Smart Wipes, 99% IPA Pre-Saturated Wipers, Cannister, 6x9
High Tech ConversionsJNJ Industries' Isopropyl Alcohol 99% is a non-aggressive universal cleaner and disinfectant. IPA 99% is CFC and HCFC free, non-aggressive, quick drying, with only a mild odor. It removes most types of inks, pastes, light oils and contaminants associated with assembly, machining, soldering,…
-
MiraSAT™ 70/30 Wipers
Foamtec InternationalMiraSAT™ 70/30 is pre-saturated with 70% Semiconductor Grade IPA & 30% Ultrapure Water(UPW) & incorporates Foamtec’s industry-leading MiraWIPE™ Microfiber sealed edge wiper. The unique woven microfiber wiper wetted with only 7.2mL of fluid enables scrubbing like cleaning…
-
70% Isopropyl Alcohol Presaturated Wipes in Canister
FG Clean WipesPerfect for on-the-go cleaning and maintenance, these critically clean polyester cellulose wipes are presaturated with 70% IPA / 30% DI water and packaged in convenient canisters. Spring-closed lids help keep wipes from drying out prematurely. Recommended for ISO 5-8 critical environments. …
-
TekniClean ™ LX Polyester Knit Wipers Available in cleanliness levels for ISO 4 and higher cleanrooms with edge finishes suitable for a wide range of applications, Teknipure™ LX is made via an Ultra-Clean proprietary manufacturing process that reduces the potential for shedding…
-
TekniMaxTM DX Nonwoven Microfiber Designed for frequent use on transparent or sensitive surfaces, TekniMax™ DX restores cleanliness by removing haze, fine particles, or oily residue build-up in a single swipe APPLICATIONS Optics & Sensor Cleaning Polishing Surfaces…
-
TekniClean ™ LX Polyester Knit Wipers Available in cleanliness levels for ISO 4 and higher cleanrooms with edge finishes suitable for a wide range of applications. TekniClean™ LX is made via an Ultra-Clean proprietary manufacturing process that reduces the potential for shedding…
-
Pre-Wetted Wipers
ValutekValutek’s pre-wetted laser sealed polyester wiper is composed of 100% continuous-filament polyester fabric pre-wetted with a blend of isopropyl alcohol and DI water. The pre-wetted format enhances the wipers absorbent capacity, effectiveness, and reduces airborne contamination from…