Angled hose connector for LabStrong™ Fi-Streem™ II and III stills. Parts are typically available to ship immediately to limit down time in the lab.The glass condenser is a replacement part for the Fi-Streem™ Water Purification Stills. The LabStrong™ Fi-Streem™ part number 562X1LS is the direct…

LabStrong cartridges are comparable to the Thermo Scientific Barnstead cartridges. Side-by-side testing shows fantastic results for purity and longevity. The LabStrong water purification cartridge is used with the Thermo Scientific Barnstead B-Pure*, E-Pure*, NANOpure*, NANOpure II and NANOpure…

General description Floating ball type with joints. Highly efficient column for atmospheric distillations. Effectively separates close boiling materials. One ball per section. Legal Information Aldrich is a registered trademark of Sigma-Aldrich Co. LLC

WaterPro® BT System produces both RO-purified and Type I water packaged in a compact all-inone benchtop design For laboratories needing 1-10 liters per day, the WaterPro BT System, delivers ultrapure Type I*, up to 18.2 megohm-cm at a typical rate of >0.5 liter per minute** at inlet…

Vivacon centrifugal concentrators offer the optimal solution for DNA and protein concentration and buffer exchange applications. For optimal performance with very dilute samples, e.g. forensic samples, Vivacon is equipped with the patented regenerated cellulose membrane Hydrosart. High recoveries…

Reservoir float switch, 2 posn. 4 pin, for LabStrong™ Fi-Streem™ III still. Parts are typically available to ship immediately to limit down time.

To measure purity of distilled or demineralized water via conductivity Particularly useful for laboratory application and in the chemical industry Rugged housing with large LCD Handy for checking water in car batteries, in steam production and many others Range: 0.1 to 99.9…

The VELP® SCIENTIFIC beaker, imhoff cone and stand are suitable for use in research facilities and chemical laboratories. They ensure smooth functioning of your instruments. These products are made of materials which offer enhanced durability.

For photooxidation of organics.

Protects the stored, distilled water against airborne impurities Replacement element only; requires Thomas number 0163A08 Vent Guard Assembly.

The arium® cartridge sets are designed for installation in arium® water purification systems to produce high ultrapure water beyond ASTM type 1 standard. H2O-A-PACK (1213R35) Analytical Kit, cartridge set for arium® VF & UV ultrapure water systems. The set including…

Distilling receiver for use where separate fractions are desired without disturbing distillation pressure. Joints are 24/40. Receiver is 5 mL. Hose connection is size B, for use with 5/16in (7.9mm) or 3/8in (9.5mm) ID tubing. For version with 14/20 joints, or PTFE- clad version with 14/20 joints,…

Provides dual entry into a variety of flasks BEVEL-SEAL adapters allow temperature measurements at either top outer opening. Useful for reflux with addition- type reactions. Adapter consists of two female standard taper joint fittings at the top and one male standard taper joint at the bottom.…

Our four grades of disposable Ion-X-Changer filter cartridges withstand water pressures as high as 100 psi for safe hookup to any laboratory tap water system. Cartridge resins turn amber to indicate when cartridges need to be changed. All cartridges must be used with mounting brackets (order…

For Simplicity® systems with Elix® / RO / distilled water feed.

Vivaflow 50 and 200 systems are ready-to-use ultrafiltration modules for crossflow filtration of samples up to 5 Liters. These novel systems offer a standard of ease of use, performance, flexibility and economy which is unrivaled by any laboratory or pilot scale filtration system in the market.…

The LabStrong B00122 20 Liter HDPE water storage carboy allows for fully automatic operation when connected to Fi-Streem III Stills (A56210-857LS, A56218-857LS, A56220-857LS, A56228-857LS, A56230-857LS and A56238-857LS). The LabStrong B00123 20 Liter HDPE water storage carboy allows for fully…

The Thermo Scientific Barnstead GenPure Pro water purifcation system makes up to 200L/day of Type 1 water from a pretreated feedwater supply. The unit ships complete with all necessary consumables and accessories so that the unit can be installed and running the day it is received.

Application: Removal of trace organics for applications such as UHPLC, LC-MS or LC-MS/MS

All glass construction Two independent safety thermostats Safety reservoir full shut off Wall mountable Silica sheathed heaters All glass construction with silica sheathed heaters ensures top purity distillate at an economical price. Fitted with a control device to turn off the…

T’ piece, plastic pretreat feed for LabStrong™ Fi-Streem™ III still.

Prevents contamination of the pure water stored in 6/10 L internal storage tanks.

Vivapore 5 is a ready-to-use benchtop concentrator for samples up to 5mL. With no need for additional equipment, pressure or vacuum source, solvent absorption is the most economic and user friendly concentration technique available for clinical and general research applications. Just fill the unit…

Vivapore 10/20 is a ready-to-use benchtop concentrator for samples up to 20mL. With no need for additional equipment, pressure or vacuum source, solvent absorption is the most economic and user friendly concentration technique available for clinical and general research applications. Just fill the…

0163B43 (06276LS): The LabStrong Fi-Streem part number 06276LS is the direct replacement of the Thermo Scientific Barnstead* Fi-Streem part number 06276. The condenser is a replacement part for Fi-Streem Water Purification Stills. Prior to installation of the condenser, salt must be emptied from…

Simple operation and highly dependable, for producing biologically pure, pyrogen-free water Water Stills (3915G20 and M50) Choose from three models depending upon your specific volume needs Features a vertical condenser for maximum efficiency and removal of gaseous impurities …

The LabStrong LMP01 is an economical and reliable replacement ultraviolet (UV) lamp comparable to the Thermo Scientific Barnstead* LMX13 UV Lamp. The lamp is effective at germicidal and total organic carbon (TOC) reduction in water through the use of 185 and 254 nanometer (nm) UV wavelengths. The…

The FP4 is a multiple stirrers with reproducible stirring speeds allowing standard conditions to be met during analysis, a basic requirement in order to obtain reliable and repeatable results. It is a portable model with four stirring places, designed to be used on-site, as it can be powered…

The LabStrong FL0016-1 Final Filter is comparable to the Thermo Scientific Barnstead* D3750 Final Filter. The LabStrong 0.2 micron (µm) Final Filter is designed for use in ultrapure water purification systems. The final filter can be used with all Thermo Scientific Barnstead B-Pure*, E-Pure*…

Replacement UV lamp for photooxidation of organic compounds, used with Milli-Q® systems (≥2001).

Microscale size solvent still that allows continuous reflux of solvents with stopcock open and collection of pure solvent when closed. Capacity of collection bulb is 15mL and has side port with cap and septum for syringe removal of contents. Still has 2 mm bore PTFE stopcock, 14/20 joints top and…

Designed for a variety of prefiltration applications such as SDI (service deionization or portable deionization), reverse osmosis, and CDI (Continuous Deionization) Systems. We offer a variety of filter cartridge and filter bag replacements and housings to meet specific configurations and…