MilliporeSigma Lab Storage Vials
-
Inserts for 2 mL large opening vials
MilliporeSigmaInsert fits 12 x 32 mm vials with large opening (6.0 mm)
-
Headspace vial, clear glass
MilliporeSigmaApplication: Headspace vial may be used in storing samples for stability analysis of freeze dried and fluid bed dried alginate microcapsules coated with chitosan containing model probiotic bacteria, Lactobacillus plantarum.
-
ABC Vial™
MilliporeSigmaLegal Information: ABC Vial is a trademark of Wheaton Industries, Inc. Other Notes: The diameter of inserts varies between manufacturers. Only the following insert part numbers are compatible with these large opening vials. •24719, 24720 Glass insert, conical bottom, 6 x 29mm •24721 Glass…
-
Certified Vial Kit, Low Adsorption (LA)
MilliporeSigmaSupelco's new Low Adsorption (LA) vials are manufactured using a process that decreases the number of hydroxyl groups on the vial's glass surface, significantly reducing surface activity while improving analytical quantitation and minimizing pH shifts in the sample. This same process also removes…
-
Space Saver storage racks
MilliporeSigmaEconomical and convenient storage for samples in your screw cap and crimp seal vials. Can be stacked when empty or full. Autoclavable, 120C. Each case contains 5 racks. Synonyms: VIAL RACK,40ML EPA VIAL, 5/CS Legal Information: WHEATON is a registered trademark of Wheaton Industries, Inc.
-
Certified screw thread vials
MilliporeSigmaOther Notes: The inside diameter of vials vary with the manufacture. The following insert part numbers are compatible with these large opening vials. •29435-U PK100, Certified 200 muL glass inserts, mandrel precision point, 6 X 29mm, with bottom spring •29436-U PK100, Certified 250 muL glass…
-
Vials, screw top
MilliporeSigmaApplication: Vials may be used in headspace solid-phase microextraction (SPME) followed by GC-FID for simultaneous analysis of furan, 2-methylfuran and 2-pentylfuran from juice samples.
-
Vials, Pre-Cleaned and Assembled
MilliporeSigmaEach of the vials is cleaned according to US EPA Protocol B: The cleaning procedure is as follows: 1. Wash containers in hot water using laboratory grade non-phosphate detergent 2. Rinse three times with copious amounts of tap water to remove detergent 3. Rinse three times with ASTM Type I…
-
Standard screw-thread autosampler vials
MilliporeSigmaConstructed of borosilicate glass. Vials use 8mm septa and screw-caps
-
Vials
MilliporeSigmaLegal Information: R.A.M. is a trademark of J.G. Finneran Associates, Inc. Other Notes: The diameter of inserts varies between manufacturers. Only the following insert part numbers are compatible with these large opening vials. •24719, 24720 Glass insert, conical bottom, 6 x 29mm •24721…
-
Certified Vial Kit, Low Adsorption (LA)
MilliporeSigmaSupelco's new Low Adsorption (LA) vials are manufactured using a process that decreases the number of hydroxyl groups on the vial's glass surface, significantly reducing surface activity while improving analytical quantitation and minimizing pH shifts in the sample. This same process also removes…
-
Wheaton sample vials with rubber lined caps
MilliporeSigmaCaps have white styrene-butadiene rubber liner and are packed in Lab-File® cases. Clear Wheaton-33, low extractable borosilicate glass or amber Wheaton-320 glass. Can be sterilized and stored at low temperatures. Legal Information: Lab File is a registered trademark of Wheaton Industries, Inc.
-
Septa, tan PTFE/silicone
MilliporeSigmaSepta, tan PTFE/silicone is a gas tight and inert nature septa, which is used for high temperature applications during pretreatment and sample oxidation.
-
Interlocked(TM) vial with fused glass insert
MilliporeSigmaThe new Interlock Vial/Insert limited volume vial is a 300 muL flange top glass insert permanently fused into 12 x 32 mm glass vials. This product provides the user with the convenience and performance of a one piece microvial at a fraction of the cost. •The flange top centers the inserts into the…
-
Vials, screw top
MilliporeSigmaApplication: Glass screw top vials (40 ml) sealed with phenolic open-top caps and PTFE/silicone septa may be used to contain pectin or plant material, during d2H analysis of plant methoxyl groups, in an experimental study to analyse stable hydrogen-isotope of methyl chloride, which is emitted from…
-
White polypropylene EPA Vials
MilliporeSigmaEach of the vials is cleaned according to US EPA Protocol B: The cleaning procedure is as follows:1. Wash containers in hot water using laboratory grade non-phosphate detergent.2. Rinse three times with copious amounts of tap water to remove detergent.3. Rinse three times with ASTM Type I…
-
Certified QSertVial(TM) (vial with fused-in insert) kit
MilliporeSigmaThe QSertVial(TM) is the ultimate microsampling device. It contains a 300 muL glass insert that is fused to the vial to form one precise integral unit. The rim of the insert is positioned slightly above the top of the vial so the septum can make a secure seal with the closure, eliminating…
-
Septa, Blue PTFE/white silicone
MilliporeSigmaPTFE/Silicone is recommended for use with most organic solvents until PTFE is pierced. It has good resealability and can withstand a temperature of 250C.
-
Vials, screw top with phenolic open-top cap, pre-assembled
MilliporeSigmaVials are used basically to inject samples from an autosampler. Autosampler needle pierces through the cap during injection and withdraws the required aliquots of sample from the vials. Screw top glass vials are used on many autosamplers with a standard opening of 4.6 mm. Amber glass prevents the…
-
Crimp seals with PTFE/silicone septa aluminum seal
MilliporeSigmaIt is used as an air-tight seal, and prevents contamintion
-
Cap liner, PTFE white
MilliporeSigmaApplication: Cap liner, PTFE may be used for Erlenmeyer flasks for COD determination.
-
Liquid scintillation vials
MilliporeSigmaAutoclavable, easy to maintain. A vial is used to store or as a closure type,in order to prevent contamination.
-
Screw cap
MilliporeSigmaGreen Thermoset Plastic Caps with F-217 PTFE Liners are known for providing the widest range of chemical compatibility and for being the most temperature tolerant of plastic closures. The color green easily identifies the PTFE liner system. F-217 foam-backed PTFE liners resist attack from virtually…
-
Screw thread vials, 12 x 32 mm, 9 mm thread, Clear
MilliporeSigmaMaterial PTFE/silicone septum (bonded to cap) Blue polypropylene cap Clear glass vial Feature Closure type blue polypropylene hole cap Closure type screw top vial Packaging Pkg of 100 ea O.D. × H × I.D. …
-
Crimpers Hand crimper
MilliporeSigmaThe Supelco hand held crimper provides a consistent and dependable seal that allows secure vial closure each and evey time. The high quality construction is engineered for durability and long life to provide a smooth and simple operation.
-
Headspace vial, clear glass
MilliporeSigmaApplication: Headspace vial may be used in storing samples for stability analysis of freeze dried and fluid bed dried alginate microcapsules coated with chitosan containing model probiotic bacteria, Lactobacillus plantarum. Legal Information: WHEATON is a registered trademark of Wheaton…
-
Magnetic Screw Cap for Headspace Vials
MilliporeSigmaThis magnetic screw cap has been developed for the CTC instrument. The vial has a precision thread with numberous threads to force the septa against the vial to seal it to be gas tight. The center hole is designed to be used for SPME as well as standard Headspace analysis, but still offers enough…
-
Screw cap
MilliporeSigmaScrew caps [for use with 2 mL vial (standard opening), thread 8-425] are available for use with sealing septa and solid caps with aluminum liners. Caps are offered in solid phenolic caps that can withstand a maximum temperature of 135 C.
-
Liquid scintillation vials
MilliporeSigmaWheaton 180 brand low-potassium glass yielding consistent low backgrounds and high UV transmission. White caps fit tightly and can be written on.
-
Certified Vial Kit, Low Adsorption (LA)
MilliporeSigmaSupelco's new Low Adsorption (LA) vials are manufactured using a process that decreases the number of hydroxyl groups on the vial's glass surface, significantly reducing surface activity while improving analytical quantitation and minimizing pH shifts in the sample. This same process also removes…
-
Snap Seal(TM) vials, Convenience Pack
MilliporeSigmaLegal Information: Snap Seal is a trademark of J.G. Finneran Associates, Inc.
-
Vials, screw top
MilliporeSigmaVials are suitable basically to inject samples from an autosampler. Autosampler needle pierces through the cap during injection and withdraws the required aliquots of sample from the vials. Screw top vials (volume 7 mL, clear glass vial, O.D. x H 17 mm x 60 mm, thread 15-425) are used on many…