Vials, MilliporeSigma, CE and CE/MS
-
Application: It may be used to cut and store fresh plant material for collecting volatiles in solid phase microextraction (SPME) technique. It may also be used in liquid chromatography-tandem mass spectrometry (LC-MS/MS) method for determining bisphenol A, 4-t-octylphenol and 4-nonylphenol in…
-
Liquid scintillation vials
MilliporeSigmaWheaton 180 brand low-potassium glass yielding consistent low backgrounds and high UV transmission. White caps fit tightly and can be written on.
-
ABC Vial™
MilliporeSigmaABC Vials have a unique 9 mm thread design that allows screwing on the caps, and still using them in a robotic autosampler. This thread is much higher on the top of the vial allowing space between the bottom of the thread and the shoulder of the vial. Legal Information: ABC Vial is a trademark…
-
Inserts for 1.5 mL large opening vials
MilliporeSigmaInserts for 1.5 mL large opening vials are clear glass conical inserts used with CTC LC PAL autosamplers.
-
Vials, screw top
MilliporeSigmaVials (volume 15 mL, clear glass vial, O.D. x H 21 mm x 70 mm) are suitable basically to inject samples from an autosampler. Autosampler needle pierces through the cap during injection and withdraws the required aliquots of sample from the vials. Synonyms: PK100 15ML CLEAR VIAL,SCREW TOP,SOLID…
-
Vials, screw top with solid green Thermoset cap
MilliporeSigmaSynonyms: PK100 7ML AMBER VIAL,SCREW TOP, SOLID CAP W/PTFE LINER
-
Septa, Blue PTFE/white silicone
MilliporeSigmaPTFE/Silicone is recommended for use with most organic solvents until PTFE is pierced. It has good resealability and can withstand a temperature of 250C.
-
Black plastic caps Solid top
MilliporeSigmaThese autoclavable caps are designed to ensure the ultimate in product safety.
-
-
Vials, screw top
MilliporeSigmaApplication: Autoclavable, easy to maintain. A vial is used to store or as a closure type.
-
Snap Ring polypropylene autosampler microvial
MilliporeSigmaSynonyms: Snap Ring Vial, 100muL, polypropylene, 100 pk Application: Autoclavable, easy to maintain. A vial is used to store or as a closure type.
-
Application: It may be used to cut and store fresh plant material for collecting volatiles in solid phase microextraction (SPME) technique. It may also be used in liquid chromatography-tandem mass spectrometry (LC-MS/MS) method for determining bisphenol A, 4-t-octylphenol and 4-nonylphenol in…
-
Crimp Top Vials
MilliporeSigmaCrimp top vials, which require an 11mm seal, are available in a variety of styles. These vials have a solid glass finish and are available with a 4.6 or 6.0mm ID opening. The larger opening increases the target area for needle penetration. The crimp seals for these vials are available in a variety…
-
-
Short thread screw cap
MilliporeSigmaShort thread screw cap, 9 mm thread, with liner is suitable for use with short thread (11.6 X 32 mm) autosampler vials. The PTFE/rubber septa are compatible with most organic solvents until pierced and are not recommended for aromatics, carbon disulfides, chlorinated solvents, hydrocarbons. The…
-
Vials, screw top
MilliporeSigmaApplication: Autoclavable, easy to maintain. A vial is used to store or as a closure type. Other Notes: 27269 --> material nos. 27269 (100pk) & 27270-U (1000pk).
-
Headspace vial, beveled top, rounded bottom volume
MilliporeSigmaHeadspace vials are available in several sizes. The style and diameter of headspace vials depend on the autosampler. Vials with rounded bottoms are sturdier and more resistant to pressure than the flat bottom vial. The rounded bottom version was created to allow the vial, when transported by a…
-
-
Certified polypropylene bonded caps with septa
MilliporeSigmaCertified polypropylene bonded caps with septa, pkg of 100 are manufactured using virgin resins to eliminate the possibility of sample contamination. Caps are molded to ensure consistency in fit, thread specification and overall dimensions. The PTFE/silicone septa are manufactured, conditioned and…
-
Vials, screw top
MilliporeSigmaVials are suitable basically to inject samples from an autosampler. Autosampler needle pierces through the cap during injection and withdraws the required aliquots of sample from the vials. Screw top vials (volume 4 mL, clear glass vial, O.D. x H 15 mm x 45 mm, thread 13-425) are used on many…
-
Septa, PTFE/Silicone red PTFE/white silicone
MilliporeSigmaIt is used as an air-tight seal, and prevents contamintion
-
Headspace vial, beveled top, rounded bottom
MilliporeSigmaHeadspace vial, beveled top, rounded bottom is a clear glass vial, which can be used with CTC autosampler (Combi PAL).
-
Headspace vial, clear glass
MilliporeSigmaApplication: Headspace vial may be used in storing samples for stability analysis of freeze dried and fluid bed dried alginate microcapsules coated with chitosan containing model probiotic bacteria, Lactobacillus plantarum.
-
Vial crimp seals, BiMetal (magnetic)
MilliporeSigmaThe BiMetal caps are made of both tin and aluminum and are easier to crimp than tin 20mm seals. The sealing surface is aluminum and the inner diameter is made of tin to add the magnetic surface. These caps are available in a variety of colors. Other Notes: We recommend using the plier-type…
-
Vials, crimp top
MilliporeSigmaThin Seal vials are speciality vials made with a thicker lip. The lip of the vial is larger to accommodate thinner septa required in SPME applications. This vial allows you to use 20 mm thin septa (
-
-
Headspace vial, clear glass, beveled top, flat bottom
MilliporeSigmaHeadspace vials are of different sizes. The style and diameter of headspace vials depends on the autosampler. The beveled finish vial reduces the amount of sealing surface between the crimp seal and the glass surface.
-
Vials, screw top
MilliporeSigmaVials (volume 22 mL, clear glass vial, thread 20-400) are suitable basically to inject samples from an autosampler. Autosampler needle pierces through the cap during injection and withdraws the required aliquots of sample from the vials.
-
Certified glass inserts
MilliporeSigmaOther Notes: Large opening inserts fits crimp seal, snap ring, and 9 mm threaded vials (with 6.0 mm ID)
-
Wheaton sample vials with rubber lined caps
MilliporeSigmaCaps have white styrene-butadiene rubber liner and are packed in Lab-File® cases. Clear Wheaton-33, low extractable borosilicate glass or amber Wheaton-320 glass. Can be sterilized and stored at low temperatures. Legal Information: Lab File is a registered trademark of Wheaton Industries, Inc.
-
Headspace vial, screw top, rounded bottom
MilliporeSigmaThese vials require a special cap with an 18 mm thread. The standard 18-400 threaded caps will not fit this vial. The part numbers for caps that are available for these vials are SU860101(with PTFE/silicone, 1.3 mm thick), SU860102 (with PTFE/butyl, 1.6 mm thick), and SU860103 (with PTFE/silicone,…