Vials

Compare Tool

Select up to 3 products

1 - 32 of 189
Sort
View
Show

MilliporeSigma LC-MS Grade Solvents and Reagents


  • Vials, screw top

    MilliporeSigma

    Vials are suitable basically to inject samples from an autosampler. Autosampler needle pierces through the cap during injection and withdraws the required aliquots of sample from the vials. Screw top vials (volume 4 mL, clear glass vial, O.D. x H 15 mm x 45 mm, thread 13-425) are used on many…

  • Vials, screw top

    MilliporeSigma

    Vials, clear glass (1.5mL) are suitable basically to inject samples from an autosampler. Autosampler needle pierces through the cap during injection and withdraws the required aliquots of sample from the vials.

  • Short thread screw cap

    MilliporeSigma

    Short thread screw cap, 9 mm thread, with liner is suitable for use with short thread (11.6 X 32 mm) autosampler vials. The PTFE/rubber septa are compatible with most organic solvents until pierced and are not recommended for aromatics, carbon disulfides, chlorinated solvents, hydrocarbons. The…

  • Headspace vials are of different sizes. The style and diameter of headspace vials depends on the autosampler. The beveled finish vial reduces the amount of sealing surface between the crimp seal and the glass surface.

  • ABC Vial™

    MilliporeSigma

    ABC Vials have a unique 9 mm thread design that allows screwing on the caps, and still using them in a robotic autosampler. This thread is much higher on the top of the vial allowing space between the bottom of the thread and the shoulder of the vial. Legal Information: ABC Vial is a trademark…

  • Vials, screw top

    MilliporeSigma

    Application: Vials may be used in headspace solid-phase microextraction (SPME) followed by GC-FID for simultaneous analysis of furan, 2-methylfuran and 2-pentylfuran from juice samples.

  • Snap Ring vial

    MilliporeSigma

    VIALS TAKING 11mm SNAP TOP SEALSLARGE OPENING, 12 x 32mmUse with:Agilent / HP 7673 series I/II,7670A, 7671A, 1042, 1090,8042, 1050, 1082, 1080, 1084AIM CPS-200A.I. (42 vial tray)Alcott 738AltexAMS 42Antek 736ASCBeckman 501, 507Carlo Erba AS V42, AS 105Carnegie CMA 230/200ChrompackDani 39.80, ALS…

  • Screw cap, solid top

    MilliporeSigma

    Green Thermoset Plastic Caps with F-217 PTFE Liners are known for providing the widest range of chemical compatibility and for being the most temperature tolerant of plastic closures. The color green easily identifies the PTFE liner system. F-217 foam-backed PTFE liners resist attack from virtually…

  • Vials

    MilliporeSigma

    Vials (volume 2 mL, amber glass vial, thread 8-425) are suitable basically to inject samples from an autosampler. Autosampler needle pierces through the cap during injection and withdraws the required aliquots of sample from the vials. Amber glass protects sensitive samples from exposure to UV…

  • Insert fits 12 x 32 mm vials with large opening (6.0 mm) Application: It may be used to contain albumin standard solution in an absolute quantification method like protein hydrolysis, o-phthalaldehyde derivatization, and reversed-phase high-performance liquid chromatography analysis in a…

  • Reliable Wheaton "180" brand low-potassium glass. White 22 mm caps have tops suitable for writing. Vials with caps attached are packed in individual cells in trays of 100.

  • These valves are very easy to use. 1. Push the green button to open the valve2. Insert the needle through the septum and take sample3. Remove the needle and push to close Benefits include: •PTFE construction for inertness. PTFE is useful when working when acids and organic solvents. •Good sealing…

  • Vials Inserts

    MilliporeSigma

    Micro volume vial inserts, when used in conjunction with autosampler vials, allow for maximum sample recovery and easier sample removal. Vial inserts (volume 0.15 mL, glass insert (with bottom spring), O.D. x H 6 mm x 38 mm) allow the use of smaller sample volumes with standard autosampler vials.…

  • Autoclavable, easy to maintain. A vial is used to store or as a closure type,in order to prevent contamination.

  • Septa, PTFE/red rubber

    MilliporeSigma

    The red rubber is "polybutyl isoprene."

  • Caps have white styrene-butadiene rubber liner and are packed in Lab-File® cases. Clear Wheaton-33, low extractable borosilicate glass or amber Wheaton-320 glass. Can be sterilized and stored at low temperatures. Legal Information: Lab File is a registered trademark of Wheaton Industries, Inc.

  • Vials, screw top

    MilliporeSigma

    Vials, screw top (4mL) are mainly used to inject samples from an autosampler. Autosampler needle pierces through the cap during injection and withdraws the required aliquots of sample from the vials.

  • Synonyms: rubber stopper; stopper

  • EPA Vials

    MilliporeSigma

    Application EPA vials has been used during solid phase microextraction (SPME) of odors in drinking water for analysis by GC/MS. General description Each of the vials is cleaned according to US EPA Protocol B: The cleaning procedure is as follows: 1. Wash containers in hot water using…

  • Cap liner, PTFE white

    MilliporeSigma

    Application: Cap liner, PTFE may be used for Erlenmeyer flasks for COD determination.

  • Vials, screw-top

    MilliporeSigma

    •Graduated. •Autoclavable borosilicate USP Type 1 glass. •PTFE-faced, styrene-butadiene rubber liner. Legal Information: V-Vial is a registered trademark of Wheaton Industries, Inc.

  • Crimp Top Vials

    MilliporeSigma

    Crimp top vials, which require an 11mm seal, are available in a variety of styles. These vials have a solid glass finish and are available with a 4.6 or 6.0mm ID opening. The larger opening increases the target area for needle penetration. The crimp seals for these vials are available in a variety…

  • Screw cap, phenolic

    MilliporeSigma

    Screw caps (black phenolic hole cap, for use with 20 or 40 mL vial with 24-400 thread) are available as hole caps for use with sealing septa. Caps are offered in phenolic resin. Phenolic hole caps can withstand a maximum temperature of 149C.

  • Each of the vials is cleaned according to US EPA Protocol B: The cleaning procedure is as follows:1. Wash containers in hot water using laboratory grade non-phosphate detergent.2. Rinse three times with copious amounts of tap water to remove detergent.3. Rinse three times with ASTM Type I…

  • Insert fits 12 x 32 mm vials with large opening (6.0 mm)

  • Glass conical inserts with polymer feet are basically used to contain standard mixtures for various experimental purposes. Application: It may be used to contain albumin standard solution in an absolute quantification method like protein hydrolysis, o-phthalaldehyde derivatization, and…

  • Headspace vial, beveled top, rounded bottom is a clear glass vial, which can be used with CTC autosampler (Combi PAL).

  • Synonyms: PK100 2ML AMBER VIAL,SCREW TOP, SOLID CAP W/PTFE LINER

  • Each of the vials is cleaned according to US EPA Protocol B: The cleaning procedure is as follows: 1. Wash containers in hot water using laboratory grade non-phosphate detergent 2. Rinse three times with copious amounts of tap water to remove detergent 3. Rinse three times with ASTM Type I…

  • Vials, screw top

    MilliporeSigma

    Vials (volume 15 mL, clear glass vial, O.D. x H 21 mm x 70 mm) are suitable basically to inject samples from an autosampler. Autosampler needle pierces through the cap during injection and withdraws the required aliquots of sample from the vials. Synonyms: PK100 15ML CLEAR VIAL,SCREW TOP,SOLID…

  • Crimp seals, 11 mm, with PTFE/rubber septa are for use with 20 mm crimp top vials. The PTFE/rubber septa are compatible with most organic solvents many organic solvents: acetic acid (

  • Vials, screw top

    MilliporeSigma

    Application: Glass screw top vials (40 ml) sealed with phenolic open-top caps and PTFE/silicone septa may be used to contain pectin or plant material, during d2H analysis of plant methoxyl groups, in an experimental study to analyse stable hydrogen-isotope of methyl chloride, which is emitted from…

Compare Tool

Select up to 3 products