The Phipps & Bird state-of-the-art programmable model elevates jar testing to a new level of precision by utilizing four operator-programmable memory banks that offer virtually unlimited stirring capabilities: Each bank may be programmed with paddle speeds from 5 to 300 rpm in 1-rpm…

Electronically controlled and built to handle viscosities ranging from light watery solution to high viscosity fluid Totally enclosed, non-ventilated motor keeps corrosive fumes and dust out for a long and trouble-free service life Permanent-magnet, D.C. motor provides maximum constant torque…

RT2 Advanced Hotplate Stirrer Experience precision with our low-profile digital display hotplate stirrer, equipped with PT100 sensor for precise temperature measurements for sensitive experimental procedures. FEATURES Digital control Overheat prevention circuit turns off…

Thermo Scientific™ Cimarec+™ series digital stirrers offer precise stirring control, exceptional safety and temperature performance for your routine protocols. The Cimarec+ Series are available in three sizes, providing flexibility from microscale chemistries to production operations. …

SIBATA 47mm Filtration Filter Holder Components are available as replacement components, or to create a customized filter holder. Available with fritted glass support base for general and biological applications, or with removable stainless steel screen support base and PTFE gasket for ultraclean…

RT Basic Series Magnetic Stirrers Experience the reliability of our plug-and-play stirrers, ideal for routine stirring applications. FEATURES Strong magnetic coupling to ensure consistent stirring during experimental procedures Three size options Low profile lightweight design…

Precise stirring at your fingertips Innovative fingertip control even while wearing gloves Advanced brushless motor provides quiet and worry-free operation Sealed exterior keeps spills away for maintenance free operation Sleek low-profile digital stirrer has a bright LCD showing…

PTFE covered stainless steel shaft with a solid PTFE retreat curve agitator. Featuring a retreat angle of 30 degrees and, for a better grip by the stir motor chuck,50mm of exposed stainless.

Precision ground glass stirring shaft, 10mm OD, attached vanes. Vanes will fit through a 45/50 joint and are contoured for use with our 9448 and 9456 series Mini-Lab flasks. Use with Trubore bearings 8036, 8038, 8039, 8040, 8042, 8043, 8047, 8051, 8053 and 8055. Compatible with our 8050 mechanical…

Simple touch and slide operation LCD display with real time parameters High IP protection class (IP 65) Ultra slim design saves valuable space Ultra flat stirrer utilizes advanced magnetic coil technology providing lighter, quieter, and wear-free operation. The unique design makes the…

Conduct stirring applications with Thermo Scientific™ Cimarec™ i Multipoint Stirrers for reliable, safe performance. These stirrers are 100% maintenance- and wear-free, in a fully synchronized multipoint platform. Features: Large, flat easy-to-clean work surfaces …

The Hot Plate or Heating Mantle with Magnetic Stirrer is ideal for simultaneous stirring and heating of liquids. The hot plate includes an integrated magnetic stirrer. Two dials allow you to control the speed and the temperature. The support arm holds a thermometer or probe. The speed range is…

With powerful magnets and no moving parts, these inductive-drive stirrers are the perfect choice for your general lab needs. Large, flat, easy-to-clean work surfaces Compact, space-saving design Gradual start acceleration is gentle and ensures optimum magnetic coupling Adjustable power…

PTFE agitator with removable blade secured with a PTFE pin. Supplied 3.2x15.2cm blade will fit through a 45/50 joint. Fits 19mm od drilled type or knob type 8076, 8078 & 8079 shafts.

Powerful Magnetic Stirrers available in either four or nine position capacities provide precise speed control that deliver repeatable performance. Offered in both digital and non-digital models. Digital models have touchpad controls for input of speed & time. Non-digital models have an…

Reliable DC motors Available in 4, 5 and 9 position models Stirs at speeds up to 2,000 rpm Stir up to 9 vessels at the same time with these Multi Position Stirrers. The stirrers' magnets and DC motors provide smooth well-coupled stirring up to 2,000 rpm. The speed of all positions on the units…

Powerful "rare earth" magnets stay coupled even under the most demanding stirring conditions Rugged ABS/Polycarbonate housing Vortex-Genie® heavy-duty motor Three different models May be used in cold rooms and incubators

Precision ground glass stirring shafts,10mm OD, crescent type. Useful for stirring viscous materials at low rpm. Available for round bottom flasks of 1, 3 and 5 liters. Code -19, 3 liter size will fit a 2 liter flask, but closely. Flask opening must be 29/42 or larger. Use with Trubore bearings…

Closure with Silicone Grommet for Nalgene # 2227-0020

Replacement components for CLS-1414 and CLS-1415 Spinner Flasks.The Complete Impeller Assembly consists of top cap, silicone liner, glass rod, compression fitting magnet holder, paddle and magnetic stir bar.

AGITATORS, PTFE, 5.5IN OD, 90°, 19MM SHAFTS Agitator made entirely of PTFE and glass filled PTFE, provides excellent stirring at the bottom of filter reactors, especially when heavy slurries are being mixed. Agitator attaches to stir shaft by both a compression fitting and a glass filled…

Micro stirrer has a 6mm OD x 305mm long precision ground button style shaft and a football shaped 11 x 33mm TFE blade. The 11 x 33mm blade can be used in flasks having a capacity of 25mL and above. Complete stirrer assembly consists of a shaft, bearing and blade.

Eliminates Flask Breakage: PTFE is the only contact in the lower radius of the flask, therefore breakage due to dropping the stirrer shaft has been eliminated. Eliminates the Frustration of Assembly: Unique design permits the proper amount of tension to be applied to the blade,…

Safely conduct applications with aggressive media in high-humidity environments with the Thermo Scientific™ Cimarec™ i Telesystem 15 Position with Telemodul 40 C Stirrer. Stirrer is designed for integration with incubators and controlled climate chambers 15 position stirrer…

A 19mm precision ground and polished stirrer shaft to fit CG-2086 19mm PTFE bearings. Side button for attachment of CG-2089 PTFE stirrer blades. PLEASE NOTE: THESE SHAFTS ARE NOT TO BE USED WITH ANY TYPE OF GLASS BEARING. FOR GROUND SHAFTS USED WITH GLASS BEARINGS SEE CG-2085. ALSO NOTE:…

The Cool Stir® Large Volume Magnetic Stirrer efficiently stirs fluid volumes from 10 liters up to 208 liters (2.5 to 55 gallons). Stirring speed is continuously changeable to around 600 rpm (maximum operational rpm depends on volume and density) delivering torque for mixing through powerful…

Safe Operations Extremely resistant sealed case IP 54 Protection class is a guarantee of durability also when working in aggressive environment Full protection in case of overload, overtemperature and over current™ Lock key to prevent unintentional modification of the…

Thomas No. 1177M38 Impeller. Mixer. Blade. Crossed Blade. Radial Flow. High Speed. Low Viscosity. 316L SS. Electropolished. High Shear. High Vortexing. Thomas No. 1177M39 This radial flow impeller is effective for high speed, low viscosity mixing. The 50 mm (2”) diameter…

Agitators are made entirely of PTFE and glass filled PTFE and are for use with 10mm OD stirrer shaft CG-2075-B. Available in 45°, 60° and 90° impeller angles. The 45° and 60° impellers are set up to stir downwards in a clockwise direction and upwards when rotated…

Heavy duty, 28mm O.D. glass stirring shaft for use with ACE 12845 reactors. Shafts are pre-drilled to accommodate 8091,8093 & 8101 agitators for 28mm od shafts. Recommended for use with either our 8067 Trubore™ bearing with debris trap or our 8050 non-shedding bearing. For motor connection,…

Fully flexible drive shaft facilitates isolation of the stirrer motor from the reactor. Complete units, code -30 (91.4cm) and code -32 (152.4cm), designed for use with 8mm (5/16in) motor shaft. Purchase the optional code -27 adapter for motors with 9.5mm (3/8in) shafts. Reactor end consists of a…

Polished stainless steel stirring shafts, 10mm OD, drilled type with removable button. When used with 8066 PTFE bearing, a lubricant-free vacuum seal can be realized at speeds up to 200 rpm. Recommended for use with 8044,8050,8066,13443 and 13445 bearings. With button, shaft accepts…