OHAUS offers four models for stirring capacities between 25 to 200 L allowing you to choose the right model for your application. The broad top plate surface allows processing of oversized vessels such as carboys for your large volume stirring. The powerful magnetic drive is also capable of mixing…

Thomas Nos. 1171T33 and 1171T35 Features Stirrable for high viscosity sample Volume knob type temperature control Chemical resistant, heat conductive aluminum with ceramic coating hot plate Thomas No. 1171T34 Features Stable rotation brings better…

PTFE covered stainless steel shaft with solid PTFE, 4 blade screw propeller. Blades are pitched 45 degrees. For a better grip by the stir motor chuck, 50mm of stainless is left exposed.

Electronically controlled and built to handle viscosities ranging from light watery solution to high viscosity fluid Totally enclosed, non-ventilated motor keeps corrosive fumes and dust out for a long and trouble-free service life Permanent-magnet, D.C. motor provides maximum constant torque…

Stirring bars with large, 25mm (1 inch) raisied center ring.

Polished glass stirring shafts, 19mm OD. Available in solid and hollow styles and in various lengths. Join 8085 blades to button type shafts, Join 8091,8092,8093 and 8100 agitators to either knob or drilled style shafts. Join all shafts to stirrer motor using 8124 series chucks. Recommended for use…

Agitator blades are constructed of PTFE with a glass filled PTFE locking nut. This enables them to be attached to the shaft in any vertical position. Note: Designed for use with CG-2079-X, CG-2078-X or CG-2096-X PTFE Covered stainless steel type shafts

Material: 316l stainless steel with ra32 finish or better Size: 15l Paddle size: 3" tall x 7 1/2" wide

The VELP Telescopic H-Stand allows even heavy accessories to be lifted and lowered effortlessly. The stand has an adjustment handle to move the stirrer. The Telecopic H-Stand is compatible with all VELP Overhead Stirrers.

Low Profile Magnetic Stirrer, 15-1500 rpm, AC 100-240 V This product can be used in medical, biotechnology, chemistry and other research fileds. High level of waterproofing protection. Motorless driven mechanism for quiet and maintenance-free operation. Sleek low profile design.…

A 19mm precision ground and polished stirrer shaft to fit CG-2086 19mm PTFE bearings. Side button for attachment of CG-2089 PTFE stirrer blades. PLEASE NOTE: THESE SHAFTS ARE NOT TO BE USED WITH ANY TYPE OF GLASS BEARING. FOR GROUND SHAFTS USED WITH GLASS BEARINGS SEE CG-2085. ALSO NOTE:…

Designed for use with #25 Ace-Thred. Consists of a Trubore bearing, pressure bushing, gland with two O-Rings and retainer bushing with o-ring. For use with our precision ground stirring shafts (8068,8070, 8071,8073,9532,9533) and reservoir as part of our 7898 Thin Film reaction system.

Ultra-flat compact magnetic stirrer, guaranteed with modern magnet coil technology. Wear-free drive with no moving parts. To ensure better mixing, the lab disc can reverse direction of rotation automatically every 30 seconds. High IP protection class (IP 65) Set-up plate and casing made…

Features: Compact overall Height Brushless DC motor Micro USB port for Control or Data Logging of RPM/Torque trends RS232 Communication Port Torque Compensation – Maintains set RPM with Viscosity Changes Precise Digital Closed Loop Speed Control: +/- 1.5 RPM CE Rated …

Material: 316l stainless steel with ra32 finish or better Size: 36l Paddle size: 3" tall x 12" wide

Powerful Magnetic Stirrers available in either four or nine position capacities provide precise speed control that deliver repeatable performance. Offered in both digital and non-digital models. Digital models have touchpad controls for input of speed & time. Non-digital models have an…

The IKA C-Mag HS 7 control has a square top made of ceramic. It stirs volumes of up to 20L (H₂O) and runs at speeds ranging from 50-1500rpm. IKA’s stands strongly by its product and technology and is offering a lifetime warranty for this product – scientists can focus on…

Stands Extra strong retort stands with H-pattern base for stability and robust support rod. Both versions include bosshead. Heavy duty stand recommended for use with SS30 overhead stirrer.   Paddle Rods Made from high grade stainless steel, there is a choice of five…

The new MINISTAR series by IKA: Developed using the latest cutting-edge technology, this high-tech overhead stirrer with its compact design is ideal for special applications. Combining high performance with particular excellence, they require minimum space and come with a lifetime guarantee.…

•    Digital temperature control with maximum temperature up to 280°C •    Digital speed control with maximum speed 200-1500rpm •    Stainless steel with ceramic coating work plate provides high chemical resistant performance …

Rated 1 hp. for use with most stirrer motors. Not for use with shunt wound DC motors. A compact, lightweight, solid state, ring stand mountable control unit, both AC and DC outlets. Pulsed AC gives better low speed torque than voltage dropping devices such as rheostat or transformer. AC output: 120…

RT Touch Series Magnetic Stirrers Stay in control with our low profile digital display stirrer, ideal for routine stirring applications where visible stir speed is required. FEATURES Digital control Gradual start-up stirring to prevent splashing Designed for stir rod…

Safely conduct applications with aggressive media in high-humidity environments with this Thermo Scientific™ Cimarec™ i Telesystem Multipoint Stirrer. The stirrer is designed for integration with incubators and controlled climate chambers. Includes: cord set with various plugs and the…

Thomas No. 1198F83: Stirring shaft with floating blades: The two blades that open as the speed rises generate an axial flow in the container, from the top towards the bottom. Particularly recommended for stirring in narrow-neck containers, e.g. flasks. Thomas No. 1198F84: Stirring shaft with…

Hi-torq SST over head drive impeller assembly - full width Size: 8l . For hi-torq motor & cap assembly (7774-40115/40230 & 7764-74000) Similar to 1964-60008 but to accept 1/2" shaft from 7764-74000 cap assy Material: 316l SST with elelctropolish finish Paddle size: 3" tall x 8" wide

16mm O.D. shaft is constructed using a molding process whereas the blade is molded directly onto the PTFE coated stainless steel shaft. This makes the stirrer chemically inert, easy to clean and can be used up to 280°C. The top of the shaft has 50mm of exposed 1/2" diameter stainless steel…

10mm O.D. shaft is constructed using a molding process whereas the blade is molded directly onto the PTFE coated stainless steel shaft. This makes the stirrer chemically inert, easy to clean and can be used up to 280°C. The top of the shaft has 50mm of exposed 1/4" diameter stainless steel…

Bell-ennium Magnetic Stirrers are designed for both cell cultures in spinner flasks as well as for general laboratory procedures requiring the use of magnetic stirring equipment.  Bell-ennium stirrers offer the researcher a wide range of capabilities and the latest innovations in stirring…

Polished glass stirring shafts, 10mm OD. Recommended for use with only our 8050,8066,13443 and 13445 bearings. Join 8083,8085,8086,8087,8096 blades to button type shafts. Join 8088, 8089, 8090 & 8091 agitators to bead type shafts. Plain shafts will accept 8094 & 8095 agitators secured with a…

Foxx Life Sciences Magnetic Mixers are used to mix components in order to obtain a homogeneous liquid mixtures. Our mixers can be used in a variety of applications including but not limited to chemistry and biology experiments, buffer solutions, and bacterial growth media. Foxx magnetic mixers are…

Blade is shaped to resemble the contour of a round bottom flask. Blades are available solid or perforated. Made of 3/16" PTFE to fit 19mm OD stirrer shafts. Minimum joint size listed is the size required to allow passage of the blade.

Now turn your existing HotBlock into a stirring Hotblock! This can be used for performing Hexavalent Chromium in soils, some pharmaceutical dissolutions, and other methods requiring both heating and mixing of your samples. Just set your HotBlock onto the StirBase, drop our special stir bars…