Eliminates Flask Breakage: PTFE is the only contact in the lower radius of the flask, therefore breakage due to dropping the stirrer shaft has been eliminated. Eliminates the Frustration of Assembly: Unique design permits the proper amount of tension to be applied to the blade,…

Support Stands are made entirely of 303 stainless steel. They have a durable base that can accommodate vessels up to 18" (457 mm) in diameter within the “U”. The base area is 17.75" (451 mm) across × 10.5" (267 mm) deep overall. The stainless steel support rod is…

The space-saving high performers from IKA MICROSTAR and MINISTAR series have been complemented by additional models. The new and easy-to-use stirrers convince with perfect basic functionalities, as well as with a compact design. Combining high performance with particular excellence, they require…

Ultra-flat compact magnetic stirrer, guaranteed with modern magnet coil technology. Wear-free drive with no moving parts. To ensure better mixing, the lab disc can reverse direction of rotation automatically every 30 seconds. High IP protection class (IP 65) Set-up plate and casing made…

Stirring bars with large, 25mm (1 inch) raisied center ring.

A 10mm precision ground stirrer shaft to fit CG-2070 through CG-2072 10mm bearings. Side button for attachment of CG-2080 or CG-2081 PTFE stirrer blades. PLEASE NOTE: THESE SHAFTS ARE NOT TO BE USED WITH ANY TYPE OF PTFE BEARING.  FOR POLISHED SHAFTS USED WITH PTFE BEARINGS SEE CG-2079.

The Phipps & Bird state-of-the-art programmable model elevates jar testing to a new level of precision by utilizing four operator-programmable memory banks that offer virtually unlimited stirring capabilities: Each bank may be programmed with paddle speeds from 5 to 300 rpm in 1-rpm…

Designed for use with #25 Ace-Thred. Consists of a Trubore bearing, pressure bushing, gland with two O-Rings and retainer bushing with o-ring. For use with our precision ground stirring shafts (8068,8070, 8071,8073,9532,9533) and reservoir as part of our 7898 Thin Film reaction system.

Even the smallest daily helper should inspire and accompany you for many years. That is the reason for our magnetic stirrers to be uncompromising when it comes to quality and reliability. The Hei-PLATE magnetic stirrers impress through a sealed and fireproof housing and a unique Kera-Disk®…

A powerful combination of torque and electronic sophistication. The robust 1/2 horsepower motor, PC/PLC connectivity and extensive features make the Caframo Crossover unparalleled in the market. Mixing up to 200 litres (55 gallons) in basic pre-mix, complex pilot scale, or full production batches…

Safely conduct applications with aggressive media in high-humidity environments with this Thermo Scientific™ Cimarec™ i Telesystem Multipoint Stirrer. The stirrer is designed for integration with incubators and controlled climate chambers. Includes: cord set with various plugs and the…

PT 1000.60 Temperature sensor, stainless steel Made of stainless steel, for use with RCT basic safety control and RET basic. Depth of immersion: 230 mm Diameter: 3 mm Material: AISI 316 Ti PT 1000.70 Temperature sensor, glass coated Glass-coated temperature…

Use Thermo Scientific™ Cimarec™ i Bath Mounts with Telesystem series stirrers. Made of transparent acrylic Capacity: 3.9 gal. (15L) Temperature Range: 0 to 60°C Dimensions: 20.4 x 12.4 x 6.3 in. (520 x 315 x 160mm)

Grease-Free PTFE stirrer bearing for use under moderate vacuum. The bearing consists of a PTFE standard taper body, Nylon compression cap, PTFE Insert/bushing and a Nylon loosening nut. The PTFE insert/bushing provides only glass and PTFE contact with the reaction. Loosening nut above the standard…

4 Blade PTFE agitator available with either 45 or 90 degree blade angle. For use with glass or metal shafts and is secured using a compression style fitting allowing it to positioned anywhere along the length of the shaft.

16mm O.D. shaft is constructed using a molding process whereas the blade is molded directly onto the PTFE coated stainless steel shaft. This makes the stirrer chemically inert, easy to clean and can be used up to 280°C. The top of the shaft has 50mm of exposed 1/2" diameter stainless steel…

•    Digital temperature control with maximum temperature up to 280°C •    Digital speed control with maximum speed 200-1500rpm •    Stainless steel with ceramic coating work plate provides high chemical resistant performance …

A 19mm precision ground and polished stirrer shaft to fit CG-2086 19mm PTFE bearings. Side button for attachment of CG-2089 PTFE stirrer blades. PLEASE NOTE: THESE SHAFTS ARE NOT TO BE USED WITH ANY TYPE OF GLASS BEARING. FOR GROUND SHAFTS USED WITH GLASS BEARINGS SEE CG-2085. ALSO NOTE:…

The MS-3000 is a compact magnetic stirrer with stainless steel working surface. It provides stirring of liquids up to 5 litres to a maximum of 3000 rpm. The MS-3000 has a powder enamelled strong steel enclosure, which is chemically resistant to acids and alkali. The stirrers are supplied with a…

Beaded pipe to sanitary fitting adapter connects to the 1-1/2” beaded pipe side arm of CG-1968-GL zero dead space drain valve. Approximate overall length of adapter is 1.75”.  NOTE: Requires a CG-1968 beaded pipe coupling.

Bell-ennium Magnetic Stirrers are designed for both cell cultures in spinner flasks as well as for general laboratory procedures requiring the use of magnetic stirring equipment.  Bell-ennium stirrers offer the laboratory researcher a wide range of capabilities and the latest innovations in…

AGITATORS, PTFE, 5.5IN OD, 90°, 19MM SHAFTS Agitator made entirely of PTFE and glass filled PTFE, provides excellent stirring at the bottom of filter reactors, especially when heavy slurries are being mixed. Agitator attaches to stir shaft by both a compression fitting and a glass filled…

The Heidolph overhead stirrers of the Hei-TORQUE series are perfectly designed for powerful stirring, in order to achieve best mixing results even for very challenging applications. Hei-TORQUE Value These stirrers are ideal for standard stirring tasks. They are designed to mix and…

This bearing is supplied with tubulation for feeding inert gases around the bearing to balance any pressure possibly being developed in the flask. Can also be used for gas-liquid reactions and gas dispersions using our hollow precision ground stirring shafts (8068, 9532).

Simple touch and slide operation LCD display with real time parameters High IP protection class (IP 65) Ultra slim design saves valuable space Ultra flat stirrer utilizes advanced magnetic coil technology providing lighter, quieter, and wear-free operation. The unique design makes the…

Features: Adjustable safety temperature cut-out: safety cut-out within the 100-580 oC temperature range is adjustable Accurate temperature and speed control: the microprocessor control technology effectively monitors the temperature and speed precision Features of digital models: Heat…

RT Basic Series Magnetic Stirrers Experience the reliability of our plug-and-play stirrers, ideal for routine stirring applications. Features: Strong magnetic coupling to ensure consistent stirring during experimental procedures Three size options Low profile lightweight…

Rotating ball joint seal gives vacuum-tight connection good into the micron range. Ultimate vacuum is determined primarily by the tightness of the vinyl tubing connector which fastens the unground shaft to the ball member. Operate below 500 rpm. Use with unground stirring shafts (8134,9530).…

Trubore bearing with standard taper joint for use with our 9534, 9535 and 9541 precision ground stir shafts. Lubricant well at top will accept enough 8117 Stir-Lube to provide hours of operation at up to 1000 rpm. Match bearing ID with stir shaft OD.

The LS is suitable for use with low/medium viscosity liquids. The technopolymer structure ensures optimum chemical resistance and enhanced handling, preventing any possible rust and being extremely light. The robust motor ensures years of continuous operation, with no extra costs for…

Continuous shearing and blending action mixes with introducing air Corrosion-resistant stainless steel Teflon® TFE bushing 11,500 rpm 120V or 240V models available Includes lab clamp The upward flow stirrer may be used effectively with pharmaceuticals, cosmetics,…