•Tape is impregnated to show words Autoclaved after 15 minutes of exposure at 250F (121C) in a steam autoclave •Tape is supplied in 500 in. (1,270 cm) roll on a 1 in. core (2.54 cm) •Tape Dimensions: W 3/4 in. (1.91 cm) •Product contains lead which under normal use, does not present a health…

Sheets pre-cut to fit standard multiwell plates. Both film and adhesive are inert and compatible with microplate procedures. Adhesive forms a tight, waterproof seal, preventing cross-contamination and evaporation. SealPlate film is 2 mil (0.05 mm) polyester, with a functional temperature range of…

Breathable Sealing Film for Tissue Culture Plates, Deep Well Plates and 96 Well Plates for Cell Growth. Certified DNase, RNase and Nucleic-acid-free.

Axygen® AxyMats™ sealing mats minimize evaporation in a wide range of temperatures in PCR and storage applications. Made of research-grade silicone, they can be autoclaved, and following a bleach wash and ethanol rinse protocol, they can also be reused. Pierceable Sealing Mat …

With a 70µm top layer and inert white polypropylene and acrylic adhesive sublayer, this easy-piercing sealing film allows direct sample recovery with single or multi-channel pipettors and robotic probes. Dimensions are 79.4mm x 142.9mm for 96-well plates Clear zones and end tabs…

A 50 mum heat-resistant polypropylene sealing film with a 25 mum layer of acrylic adhesive designed for thermal cycling applications. Each sealing film measures 79.4 x 137.8 mm and offers sufficient sealing area for all PCR plates. Length between the perforations with end tabs removed is 123.1 mm.…

Ideal for cell, tissue and bacterial cultures Re-fillable & re-usable polypropylene applicator for quick and easy dispensing of film from a roll Seals three times faster that sheeted films Protects film from dust and contaminants Environmentally friendly; no paper backing to remove…

Transparent (Clear) and Peelable Heat Sealing Film for the Ultraseal Pro.  Optically clear, peelable heat sealing film suitable for qPCR and optical applications.  When heat is applied, the clear laminate film forming a peelable seal to polypropylene, polyethylene, polystyrene,…

PARAFILM stretches up to 200% and clings even around irregular shapes and surfaces. The sealing film is free of plasticizers and consists primarily of polyolefins and paraffin waxes. PARAFILM M is resistant up to 48 hours against many polar substances, eg saline solutions, inorganic acids and…

Rapid-curing, general-purpose adhesive/encapsulant which easily dispenses and mixes in seconds, dries in 15 minutes and reaches functional strength in 1 hour. Key Features Bonds rigid durable substrates such as metals, glass, ceramics, concrete and wood in all combinations Forms a…

ThermalSeal® A™ sealing films are an advanced version of Excel Scientific's classic ThermalSeal® sealing films for PCR. ThermalSeal A films consist of 50 µm polyester film with a 41 µm layer of acrylic adhesive formulated for improved protection against…

Axygen® sealing film roller is a durable and efficient roller ideal for applying sealing films to any plate. Sturdy plastic handle and semi-hard roller head are ideal for complete and easy applications of film. Ideal for the application of all PlateMax™ sealing films

Fast, easy-to-use film provides superior cling. Strong, clear Reynolds® Foodservice Film is ideal for covering, storing and wrapping. Continuous length rolls come in sturdy, easy-to-use dispenser cartons to prevent waste.

CyclerSeal for sealing multi-well plates.

A 36 mum soft non-permeable aluminum foil sealing film with strong medical-grade adhesive, AlumaSeal® II sealing films eliminate the need for heat-sealing devices or mats during thermal cycling. Each sealing film measures 82.6 x 146.1 mm and offers sufficient sealing area for all PCR plates. Length…

Unique design for maximum safety Store, dispense, and cut Parafilm®, tape, labels, and Tough-Tags®. ABS plastic dispenser designed with a safety razor that slides and cuts with no danger to fingers. Dispenser holds one or two 2-inch rolls, or one 4-inch roll.

Sealing applicators are designed for use with both flat-top and raised-rim plates to ensure a secure and uniform pressure-sensitive seal around all wells. Reusable and autoclavable.

Breathe-EASIER (a white non-woven rayon membrane) transmits water vapor 6 times faster than Breathe-EASY for accelerated growth. Membranes are ideal for cell growth, concentrating samples (e.g. freeze drying), and gas exchange. Easy microtube cap closure. Will not bind in centrifuge rotors. …

Peelable Seal integrity range: -200 °C to 110 °C High solvent resistance Autoclavable (121 °C) Use Recommended for PCR, including with water bath thermal cyclers Seals polypropylene plates Suitable for long term storage and transportation Suitable for very low…

This transparent sealing tape consists of a 2.0 mil polyolefin film coated on one side with a pressure sensitive acrylate adhesive which does not interfere with cycle reactions. It is ideal for reducing well-to-well contamination and/or spill over in sensitive PCR applications where the…

XTR films offer high performance under extreme conditions. A 2 mil polyester film with a 1.65 mil layer of strong acrylic adhesive. eXTReme Seal films remove cleanly from plate surfaces without adhesive stringing, residue or contamination. Each sealing films measures 78.3 x 140.5 mm and offers…

A 140 mum thick hydrophobic porous sealing film with medical-grade adhesive for tissue culture plates, bio-blocks, and 96-well plates where gas exchange is necessary for cell or bacterial growth. AeraSeal(TM) sealing films minimize cross-contamination, spillage and evaporation. They allow uniform…

AEP's exclusive GraterEdge blade offers superior cutting performance with unmatched durability and safety. The result is the industry's most efficient producer delivering the right cling for the tightest seal.

XR Foil is suitable for long term storage in extreme conditions and resistant to DMSO and other solvents. Temperature range for foil or mats: -80° to +120°C. Citadel-XR Foil for long-term storage in EXTREME conditions.

Sealing Mat Plus, Pierceable, Resealable, Solvent Resistant, -40°C to +120°C.  This dimple-free mat manufactured from 10 mil medical grade transparent Silicone with Adhesive-Free well coverage bonds firmly to the microplate, permits precise withdrawal and injection of liquid, and…

Available as standard AxyMat or chemically resistant ImpermaMat. Reusable and versatile, Axygen AxyMats minimize evaporation in a wide range of temperatures in PCR and storage applications. These sealing mats are designed specifically for 384-Well PCR microplates and deep well plates with square…

Non-pierceable Peelable Seal integrity range: -40 °C to 110 °C Use Applications: qPCR and other fluorescent applications, plate readers, microscopy and protein crystallization (96 or 384 well) Removal: will not leave a sticky residue on the plate surface following removal