Moisture-proof film molds to surface Parafilm® M is a semi-transparent, flexible, thermoplastic film with two-way stretch. Non-toxic and free from plasticizers, primarily composed of polyolefins and paraffin waxes offering good resistance against acids, alkalis and some organic…

Soft and non-permeable, our 2.0 mil aluminum sealing foil offers optimum sealing for all PCR plates. Using a medical-grade acrylic adhesive, these foil seals are more durable than the thin 1.4mil aluminum films, and are better suited to longer term sample storage.  Soft and non-permeable,…

Stretches & Conforms Waterproof & Chemically Resistant Temperature Resistant ContainerSEAL™ is a sealing tape designed for the vast range of bottles and containers used in laboratory applications. Its unique elastomeric characteristics allow it to stretch and conform…

Pierceable Resealable Seal integrity range: -20 °C to 120 °C Good solvent resistance Autoclavable (121 °C) Use Seals polypropylene and polystyrene plates Suitable for long term storage

With a 70µm top layer and inert white polypropylene and acrylic adhesive sublayer, this easy-piercing sealing film allows direct sample recovery with single or multi-channel pipettors and robotic probes. Dimensions are 79.4mm x 142.9mm for 96-well plates Clear zones and end tabs…

BRAND offers a wide selection of accessories for multiwell plates including lids and sealing films. In cases where the multiwell plate needs not only to be covered, but also securely sealed, self-adhesive films are available. These film sheets can be applied on the plates and removed without the…

Ideal for short-term storage at ambient temperatures and robotics Designed for short-term handling and storage of samples that require multiple access to wells by pipet tips or robotic probes A pre-cut “X” over each well creates bendable flaps that provide sample access without…

General Purpose Sealing Film Application: Ideal for ELISA, Incubation and General Use Temperature Range: -40°C to +120°C - Certified DNase- & RNase- free - Designed to be used with both polystyrene and polypropylene plates - 2.0mil clear polypropylene film features good…

Axygen® sealing film roller is a durable and efficient roller ideal for applying sealing films to any plate. Sturdy plastic handle and semi-hard roller head are ideal for complete and easy applications of film. Ideal for the application of all PlateMax™ sealing films

Breathable Sealing Film for Tissue Culture Plates, Deep Well Plates and 96 Well Plates for Cell Growth. Certified DNase, RNase and Nucleic-acid-free.

The encapsulated silicone seal does not expose your sample to adhesive! These optically clear polyester films are ideally suited for Real Time PCR (qPCR). They feature an inert, ultra-clear, and strong encapsulated silicone adhesive that provides extraordinary performance in real-time PCR…

Peelable heat sealing foil, seals to polystyrene plates, resealable, pierceable; suitable for compound storage.  Specifically designed to heat seal polystyrene plates, this seal has moderate solvent resistance and is ideal for low temperature compound storage, in DMSO and organic solvents, and…

Easily pierceable sealing foil, high solvent resistance,resealable, suitable for PCR, compound storage and sample shipping.  This sealing film has high solvent resistance and has the ability to seal samples as low as -20 degrees C, ideal for low and room temperature compound storage in DMSO…

Rollers are designed to seal flat-top plates to ensure a secure and uniform pressure-sensitive seal around all wells. Reusable and autoclavable.

Pierceable Peelable Seal integrity range: -80°C to 120°C Use Applications: PCR, incubation, storage Suitable for cutting to fit part plates

Sealing applicators are designed for use with both flat-top and raised-rim plates to ensure a secure and uniform pressure-sensitive seal around all wells. Reusable and autoclavable.

Peelable Seal integrity range: -80 °C to 80 °C (to 110 °C with a pressurized heated PCR lid) Optically clear Use Applications: imaging, fluorescent detection, and colorimetric assays Suitable for PCR and qPCR Seals polypropylene, polyethylene, polystyrene,…

Non-pierceable, please refer to our QuickSeal Foil PCR for a pierceable variant Peelable Seal integrity range: -20 °C to 110 °C Use Applications: PCR, low temperature storage and transportation Removal: features adhesive-free end tabs for easy removal, will not leave a…

Available as standard AxyMat or chemically resistant ImpermaMat. Reusable and versatile, Axygen AxyMats minimize evaporation in a wide range of temperatures in PCR and storage applications. These sealing mats are designed specifically for 384-Well PCR microplates and deep well plates with square…

A 140 mum thick hydrophobic porous sealing film with medical-grade adhesive for tissue culture plates, bio-blocks, and 96-well plates where gas exchange is necessary for cell or bacterial growth. AeraSeal(TM) sealing films minimize cross-contamination, spillage and evaporation. They allow uniform…

Ideal for cell, tissue and bacterial cultures Re-fillable & re-usable polypropylene applicator for quick and easy dispensing of film from a roll Seals three times faster that sheeted films Protects film from dust and contaminants Environmentally friendly; no paper backing to remove…

Ideal for cold storage, moderate and high temperature incubation, protection of light sensitive samples and high throughput samples Strong 2.7 mil thick pierceable aluminum film Non-cytotoxic and sterile Temperature stable from -80°C to 110°C Resistant to DMSO, chemicals,…

UNIMPEDED CELL GROWTH - Strips allow for beneficial exchange of oxygen and CO2 for cellular growth MICROBIAL BARRIER  - Prevent microbial and viral contamination during growth and storage of cells IDEAL DESIGN - Strip design allows film to be protected during application; a tab…

Strong adhesive seal with cross-cut windows, red adhesive, peelable, pierceable; suitable for 384 square well plates This strong adhesive seal was developed to facilitate easy sample removal with a manual or automated system. A red adhesive is applied across the underside of the seal, except…

Eppendorf offers high-performance sealing options for nearly every application: for incubation and storage; colorimetric ELISA, fluorescence and luminescence experiments; sample processing and cell cultures; and for PCR and qPCR amplification. Features Storage Film and Foil glued…

MicronPlus  adhesive sealing films have adhesive-free areas over the microplate wells so that the adhesive is not in contact with the well contents. The sealing films are made with color adhesives with outstanding chemical and temperature resistance.  The PTFE material is inert, optically…

Ideal for ELISA, Incubation and General Use An economical, efficient way to rapidly seal microplates; faster than applying single sheeted film Self-standing, non-slip supports hold pre-scored film roll securely in place for quick and easy dispensing Continuous backing liner can be torn off…

This seal is best suited for short term storage and standard PCR An economical, efficient way to rapidly seal microplates; faster than applying single sheeted foils Self-standing, non-slip supports hold pre-scored foil roll securely in place for quick and easy dispensing Removal from a…

100% polyethylene wrap Low tangle High cling Ultra-clean film Metal tear-off bar makes it easy to cut the exact size you need Flap prevents roll from leaving box Wrap is 12” wide by 100 feet in length

Our PCR seals are made from polypropylene film with acrylic adhesive.  They offer high heat-resistance and a strong adhesive bond.  They are designed for the rigors of thermal cycling and sequencing.  The acrylic seal adheres aggressively to form a tight positive seal on your plate. …