PerkinElmer Lab Sampling Systems
Benchmark BenchPress 2024 - Promos & Lab Favorites
Shakers, Incubators, Centrifuges, Balances, Rotators,
Vortexers, Dry Baths, Rockers and MORE!
Download the promotional brochure below learn more.
Benchmark BenchPress 2024 Promotional Brochure
Offers expire July 31, 2024
-
These 250 mL polyethylene wide mouth bottles have dimensions 61 mm outer diameter by 130 mm height.
-
SENSOR-STA6000 SATURN A
PerkinElmerPerkinElmer offers a complete portfolio of consumables, accessories and supplies that deliver optimal performance in measuring the coef cient of thermal expansion (CTE), Tg, and TM in materials. Choose from a range of consumables and accessories with a cost ef cient range of probes including…
-
Sample Tray for PerkinElmer AS-93 plus/S10 Autosampler (rinsing-port rack) with rinsing port location (location 0) and 20 locations for 50 mL solution containers.
-
30ml Polypropylene, 25mm x 95mm (500 PER KIT)
PerkinElmer30ml Polypropylene, 25mm x 95mm (500 PER KIT)
-
New sampling probe for PerkinElmer AS-90/90A/90 Plus/91/93 Plus Autosampler, 0. 6mm Inner Diameter. This probe cannot be used withAS-90s, which still have older sampling probe holder. Optional corrosion-resistant probe, suitable for inorganic acids and most organic solvents, except for NMP.…
-
Length: 1m, Inner Diameter: 0.6mm, Two Fittings
-
Accuracy of large metal loops (1.0 mm, 0.040" bore) is about ±5%, intermediate loops (0.5 mm, 0.020" bore) ±10%, and small loops (0.2 mm, 0.007" bore) ±30%. Bore: 0.76 mm. Model 7725 Injector loops are not interchangeable with loops for the Model 7125. The port angle for the 7725 is 30° whereas the…
-
-
TFM Pressure Seal for High Pressure 100 mL (100 Bar) Digestion Vessels for Titan MPS 16 Position Microwave Sample Preparation Systems. Made of TFM Quantity: set of 5
-
Vis/NIR (400 to 2400nm) 2 x 2m each.
-
PEEK Sample Loops avoid many of the problems associated with stainless steel sample loops. Metal loops will often absorb sample components resulting in inaccurate quantitative results. In addition, metal loops may be corroded by high-salt buffers and chloride salts. Sample Loops are made from PEEK…
-
Sample Tray Cover
PerkinElmerThe PerkinElmer sample tray cover is installed on the auto sampler tray of AS-800 and AS-900 absorption instruments to cover the sample cups.
-
-
Vacuum Manifold, Complete Set with 24 positions
PerkinElmerSPE Vacuum Manifolds accommodate either 12 or 24 cartridges; 1, 3, 6, 15 and 25 mL columns can be used. Manifolds are equipped with a vacuum port to connect a standard laboratory vacuum pump. Vacuum pulls the sample through the stationary phase, metered by the stopcocks, to control the speed of the…
-
Seal Holder
PerkinElmerThe PerkinElmer seal holder is made from dense PEEK material and is compatible to use with XQ80 and XF100 pressure vessels that are installed in the multi-wave 3000 instruments.
-
SPB Replacement SPB Probe Watch Glass
PerkinElmerThe SPB probe watch glass is designed to use with 100 mL tubes.
-
Translucent polypropylene tubes, 13 mm x 100 mm, are designed to provide excellent chemical resistance.
-
The size designations of stainless steel loops are nominal. Theactual volumes can differ from the theoretical designations becauseof the ± 0.025 mm (0.001") tolerance of the metal tubingbore. Accuracy of large metal loops (1.0 mm, 0.040" bore) is about±5%, intermediate loops (0.5 mm, 0.020" bore)…
-
Used for installing the auto sipper accessory (N4101012).
-
Mass Flow Controller and Supplies Kit
PerkinElmerUses capillary-type thermal technology to directly measure mass flow of gases. No temperature, pressure or square root corrections are required. Comes with an LCD display and has linear 0 to 5 and 4 to20 mA output. Uses an internal electromagnetic proportional valve to control the mass flow rate.
-
-
-
The size designations of stainless steel loops are nominal. The actual volumes can differ from the theoretical designations because of the ± 0.025 mm (0.001") tolerance of the metal tubing bore. Accuracy of large metal loops (1.0 mm, 0.040" bore) is about ±5%, intermediate loops (0.5 mm, 0.020"…
-
Microtiter Cover Mat
PerkinElmerThe PerkinElmer microtiter cover mat can be used with both shallow plates as well as deep plates.
-
High Flow ST nebulizer line, connects to port #3 0.25 i.d. (green marker)
-
Fruit & Vegetables EN 15662 Clean-up Kit, 15 mL
PerkinElmerQuEChERS kit with clean-up materials packed in ready-to-use tubes supporting EN 15662 methodology. Volume: 15 mL Quantity: 50 MgSO4 1 : 900 mg PSA 2 : 150 mg 1 MgSO4 removes excess water 2 PSA removes sugars, fatty acids, organic acids, and anthocyanine pigments
-
This 96-position sample/collection rack features wells designed for 8 mL to 13 mL vials. It's compatible with the ASX-260, ASX-280, ASX-520, ASX-520HS, ASX-560, EXR-8, XLR-8, XLR-860, and ASX-1600 and the APS-1650.
-
81 Position Sample Tray for LC Autosampler
PerkinElmerSample Tray for PerkinElmer Series 200 Autosampler. Dilution with tank. Includes: PerkinElmer Part No. N2930044 81-Position Tray and PerkinElmer Part No. B0505677 Glass Diluent Tank.
-
Non HF-Resistant Internal Standard Kit
PerkinElmerThis kit includes: EzyFit Glass Mixing T-piece N0777461 Internal Standard Sample Probe 0.25 mm ID N0777465 EzyFit Sample Tube - Twin N0777462 EzyFit Sample Tube 0.5 mm ID N0777463 EzyFit Internal Standard Tube 0.25 mm ID N0777464 Vitex ® Gripper Paper - Qty. 6 N0777848 Orange-Blue Flared…
-
Vessel base made of TFM for High Pressure 100 mL (100 Bar) Digestion Vessel for Titan MPS 8 Position Microwave Sample Preparation Systems.
-
Liner for High Pressure 100 mL (100 Bar) Digestion Vessel made of TFM for Titan MPS 8 Position Microwave Sample Preparation Systems.
-
Consists of stainless steel sampling probe and screw fitting (P/N B3000152), and FIAS capillary tubing assembly (P/N B3000158). Replaces B0196966.