PerkinElmer Lab Sampling Systems
-
PerkinElmer translucent polypropylene tubes are designed to provide excellent chemical resistance. PerformR ™ 15 mL and 50 mL conical tubes are designed for your routine everyday applications and storage needs. SuperClear ™ tubes are made from a unique medical grade resin. PerformR and SuperClear…
-
Includes: Pressure Seal Vessel Cap Rupture Disc TFM Vessel Insert Ceramic Pressure Jacket Vessel Base
-
KBr Powder for FTIR Sampling Kits, 100g
PerkinElmerThis kit contains samples to rapidly familiarize you with sampling techniques such as Transmission, ATR and Diffuse reflectance, and preparing a cast thin film. The kit also provides familiarization with IR software including Basic Operation, Quality Checks and Spectral processing (Search and…
-
Translucent polypropylene tubes, 17 mm x 100 mm, are designed to provide excellent chemical resistance.
-
Vacuum Manifold, Complete Set with 12 Positions
PerkinElmerSPE Vacuum Manifolds allow you to process up to 24 samples simultaneously while seamlessly integrating with columns.
-
It includes: 6 ft (1.82 m) 1/8" I.D. Tygon ® tubing 1 - Y connector assembly w/ attached Tygon tubing 1 - 20 cm length 1/8" in I.D. Tygon tubing 1 - 12.7 cm length 1/8" I.D. Tygon tubing 2 - uptake lines w/ 1.2 m 1/8" I.D. Tygon w/ 30 cm 3/32" I.D. FEP tubing 2 - 4.25" lengths of 1.6 mm…
-
50 mm Camlock Powder Cup with Quartz Base
PerkinElmerA black, round, metal sample cup with quartz glass installed in the base. The cup comes with a locking metal back and a foam insert. The cup can be used to analyze dry, ground food or agriculture products. Once the cup is filled, please use disposable backs (L1281934).
-
Stopcocks 24 with Positions
PerkinElmerStopcocks are rugged, reusable and provide independent flow control to meter the sample as it is pulled through the vacuum.
-
Non HF-Resistant Internal Standard Kit
PerkinElmerThis kit includes: EzyFit Glass Mixing T-piece N0777461 Internal Standard Sample Probe 0.25 mm ID N0777465 EzyFit Sample Tube - Twin N0777462 EzyFit Sample Tube 0.5 mm ID N0777463 EzyFit Internal Standard Tube 0.25 mm ID N0777464 Vitex ® Gripper Paper - Qty. 6 N0777848 Orange-Blue Flared…
-
CORR RESIST SAMPLE PROBE W/O TUBING
PerkinElmerSuitable for inorganic acids and most organic solvents,except NMP. Requires, but does not include, the capillary tubing assemblies.
-
0.25mm i.d. Carbon fiber support SC-autosampler probe for ST nebulizers, 100 µL/min uptake rate, 150 cm capillary.
-
Probe/Waste/Vacuum Line Assembly
PerkinElmerThe PerkinElmer probe/waste/vacuum line assembly is used in chemical laboratories.
-
EN 15662 Extraction Kit, 50 mL
PerkinElmerQuEChERS kit with extraction materials packed in ready-to-use tubes supporting EN 15662 methodology. Volume: 50 mL Quantity: 50 MgSO4: 4 g Na Citrate: 1 g Na Citrate Sesquihydrate: 0.5 g NaCL: 1 g
-
50 mL Polypropylene Sampling Vial with Screw Cap
PerkinElmer28 mm o.d. polypropylene tube with screw cap, Quantity: 50, Volume: 50 mL. Non-PFA sample vessels manufactured from plastics, such as polypropylene, polyethylene and polystyrene, are a sensible alternative to consider when breakage, surface inertness, and/or disposal costs are a concern.
-
For blank solutions, reagent solutions or matrix modifiers.
-
Stainless Steel Sample Holding Loop for PerkinElmer Series 200 Autosampler. Replacement parts for PerkinElmer autosamplers are identical to the components contained in your instrument at the time of purchase. Use of these parts will ensure that your sample operates with maximum precision and accuracy.
-
For use in Standard 75 mL (40 Bar) or High Pressure 100 mL (100 Bar) Digestion Vessel, quantity- 16.
-
Internal Standard addition tee, used with ST nebulizer 0.15
-
Drying Attachment with 24 Positions
PerkinElmerSPE Vacuum Manifolds accommodate either 12 or 24 cartridges; 1, 3, 6, 15 and 25 mL columns can be used. Manifolds are equipped with a vacuum port to connect a standard laboratory vacuum pump. Vacuum pulls the sample through the stationary phase, metered by the stopcocks, to control the speed of the…
-
Replaceable quartz window that slides into the purge extension between the torch and the optics.
-
SC Autosampler Probe PTFE 1.0mm ID
PerkinElmerA contoured design reduces carryover, while an all PFA wetted sample flow path reduces contamination. SC Autosampler Probe, Carbon fiber support, 1.0mm ID (gray marker), long probe, long capillary, connects to port #5 (¼-28 fitting) high flow.
-
225 Position Sample Tray LC Autosampler
PerkinElmerSample Tray for PerkinElmer Series 200 Autosampler. Microvials/high throughput. Replacement parts for PerkinElmer autosamplers are identical to the components contained in your instrument at the time of purchase. Use of these parts will ensure that your sample operates with maximum precision and accuracy.
-
Microtiter plate, 48 position, (7.5mL) (Qty 3)
PerkinElmer1 Pk (3 ea) 48 well, 7. 5 mL microtiter plate, square well, pyramid bottom. Microtiter plates are ideal for micro volume applications such as storage and sample transfer.
-
Purge Tube O-Ring
PerkinElmerThe PerkinElmer purge tube O-ring measuring 0.674 in ID x 0.1 in W is designed to use with dual view radial purge tube.
-
-
SPB Probe 6 for 50mL Tubes
PerkinElmerThe SPB Probe provides direct control and monitoring of actual sample temperature via a corrosion-resistant, PFA-coated temperature probe. Available with different holders in a 6"configuration for use with 50 and 100 mL DigiTUBE®s. Each probe is supplied with 5 Probe Watch Glasses and a probe holder.
-
-
-
ESI Autosampler Probe .20mm
PerkinElmerReplacement probes for ESI autosamplers. All perfluoroalkyl (PFA) wetted sample flow path reduces contamination and provides chemical resistance.
-
Translucent polypropylene tubes, 17 mm x 100 mm, are designed to provide excellent chemical resistance.
-
-
9 Position standards rack with 125 mL bottles for SC-4 DX and SC-14 DX. Recommended for prepFAST.