Racks, Tube
-
-
Foam Tube Racks
Heathrow ScientificHigh storage, minimal footprint Lightweight microtube racks are ideal for long-term studies or tube storage. Two-piece racks are constructed of expanded polystyrene (EPS) foam Extra spacing between wells allows easy gripping with fingertips Racks stack securely with nesting…
-
Holds two sizes of conical bottom tubes Polystyrene foam racks are designed to hold Corning 15 and 50 mL conical bottom plastic centrifuge tubes in the same rack.
-
10 & 12-Place Polypropylene Tube Racks
Globe ScientificThese traditional style test tube holders are lightweight, compact and unbreakable. They take up less space on the benchtop to provide a larger work area. They are produced from durable polypropylene (PP) and can be autoclaved at 121oC for 20 minutes.
-
Microcentrifuge Floating Racks
SP Bel-ArtCompact and Economical Incubate up to twenty-four 1.5ml microcentrifuge tubes in a water bath. Easy to load Microtubes are held snugly and then released when the rack is pressed down on a benchtop Dimensions: 11.9 x 7.8cm (4-11/16 x 3-1/16")
-
Common Rack - 96 ID Tube-Rack-System
LVL technologiesHigh rack / flat lid Material Polypropylene (PP) SBS-standard suitable for all robotic sample systems Available with coded or non-coded tubes Pressure-tested tightness of tubes …
-
Microtube Storage Box
Thermo Scientific NalgeneBottom is of white polycarbonate with a permanent foam insert; lid is of clear polycarbonate Insert can accommodate up to fifty 1.5 mL microtubes. Usable temperature range -150° to +121°C. Gridded lid permits easy inventory control and can be written on with marker for box and tube…
-
CoolRack® and CoolSink™ modules
Azenta Life SciencesBioCision® thermoconductive modules provide reproducible and standardized temperature control to biological samples while on the bench. Place CoolRack® or CoolSink™ modules on ice, dry ice, liquid nitrogen, water baths, heat blocks (-200°C through 100°C+) or other and they…
-
Tube Racks
MTC BioMTC Bio’s benchtop tube racks are made of 100% polypropylene and are available in three popular configurations. No. R1030 is a 4-way rack that can be used to hold 4x 50ml, 12x 15ml or 32x micro tubes (0.5, 1.5 or 2ml). They can be snap-linked together to form as large as rack as is…
-
Epoxy-coated steel wire rack holds 15 conical bottom 15mL centrifuge tubes. Top and middle sections have 18mm square holes and are centered over rails in the base that hold the tips of the tubes. Generously spaced for easy handling Heat-cured epoxy coating is unaffected by organic…
-
Scienceware® 50mL Tube Holders
SP Bel-ArtPolystyrene construction. Leave both hands free for pipetting and other critical tasks Non-Grip Style safely supports a 50ml conical centrifuge tube and permits the tube to freely be removed Grip Style gently grips the tube and moves with the tube when it is lifted from the bench top
-
Labcon 80-Place Rack Hinged Storage Box. For use with 80-place storage racks this box is autoclavable (122°C) and freezable (-80°C). Made of polypropylene. With hinged clear lid For use with 80 place tube racks Accepts one 80 place rack for freezer storage Freezable to…
-
Floating Test Tube Racks
JaecePolyfoam racks for PCR, microtubes and centrifuge tubes Eliminate expensive plastic floating racks with economical polyfoam floating racks. Easy to use in waterbaths or beakers. Inscriptions with Identi-Marker pens may be made for quick identification. Unique Features …
-
Rack Tube Conical 50mL 28mm 4 Pos
LabconcoBlue anodized aluminum blocks hold tubes upright and promote conduction of heat or cold from the Temp-Zone area on selected models of Purifier Cell Logic Biosafety Cabinets to help maintain sample temperature. Rack holds 4 conical 50 mL tubes
-
Universal Tube Rack
Heathrow ScientificA rack for every application Quickly change tube sizes with this adaptable polypropylene rack. Open the iris with a turn of the knob or directly insert a tube into the opening. Holds up to 12 similar size tubes. Imprinted references for easy identification. Generously-sized handles for easy…
-
16mm Test Tube Foam Rack (for 15mL centrifuge tubes). Color: Green 50 tube capacity
-
Poxygrid® 50mL Centrifuge Tube Racks
SP Bel-ArtThis black epoxy-coated rack holds 30mm diameter or smaller centrifuge tubes in a 4 x 6 pattern, 24 tubes per rack. Height: 7.9cm (3.1"); four feet that raise the height an additional 2.1cm (0.81") Heat-cured epoxy coating is unaffected by organic solvents, salts, weak acids…
-
NMR/EPR Tube Racks
SP Wilmad-LabGlassThree styles available for our NMR and EPR Tubes 1187C59 (820-A): Lightweight polypropylene rack maximizes your benchtop storage capacity and is virtually inert 1187C64 (WG-2442): Simple but useful this stainless steel NMR tube rack accommodates 12 tubes with a maximum OD of 5mm.…
-
PCR Work-Up Rack with Strip Tube Insert
EppendorfFor labs using cycle strips, 8 or 12 tube strips or large quantities of individual 0.2 mL PCR tubes Removable strip tube rack Tube wells are alphanumerically matrixed Fluorescent colors This rack is designed in the traditional 96 well 8 x 12 microtiter format. Four retainer clips hold a…
-
Storage Racks
Thermo Scientific Sun SRiOpen top racks manufactured from polypropylene Open top available for 8, 12 and 15mm diameter vials Colored vial box racks with lid made from high density polypropylene
-
Biotube System
SimportMicrotiter format rack and tube system Resistant to most research chemicals Autoclavable up to 100 times Can be stored in temperatures as low as -80°C Holds tubes in an 8 x 12 format Ideal for all PCR applications: EIA, RIA, cell harvesting, etc. All components are…
-
Unique system for transporting blood tubes, urinalysis tubes and other routinely transported tubes. System consists of dense protective foam die cut. Each individual die cut hole can be torn apart to ship individual tubes. Shelf life: 24 months
-
Blue anodized aluminum blocks hold tubes upright and promote conduction of heat or cold from the Temp-Zone area on selected models of Purifier Cell Logic Biosafety Cabinets to help maintain sample temperature. Holds 96 each 1.5 ml microcentrifuge tubes, 10.5 mm in diameter
-
Stainless Steel Tube Racks
Globe ScientificThese specially shaped "Z" racks are rust proof and will hold up to repeated use. The wide base provides stability and prevents tipping. When not in use, the racks stack neatly inside one another to conserve benchtop space.
-
TEST TUBE RACK SET, PLASTIC TUBES
United Scientific SuppliesThis set contains twelve 15ml screw top graduated plastic tubes and a brightly colored two tiered test tube stand.
-
Leighton Tube Rack
Bellco GlassFor leighton type tissue tubes. Hinged front of rack locks tubes into position. Specifications: Tube Lengths: 83mm-93m Tubes Per Rack: 36
-
Color Comparison Tube Rack
SP Bel-ArtColor Comparison Tests Just Became Easier Colors stand out against the white surfaces of this polypropylene rack making color comparison tests easier to read. Useful for drying or storing test tubes Holds six, 25mm or eight, 18mm tubes; includes six drying pins Steam…
-
-
-
PLASTIC TEST TUBE RACK, ROUND, 24-TUBE
United Scientific SuppliesGood quality round test tube rack will hold 24 tubes up to 20mm in diameter. Solid high-impact plastic construction. Rack is 145mm in diameter and 70mm high, and features a perforated bottom. Shipped preassembled.
-
Tube Rack
MTC BioThese compact, convenient 80 well racks are designed to keep your tubes neatly and efficiently organized. They are compatible with conical and self-standing microtubes and all wells have raised, molded numbers for quick identification. The bottom of each well has been recessed to improve conical…
-
Rack Tube Conical 15mL 16mm 12 Pos
LabconcoBlue anodized aluminum blocks hold tubes upright and promote conduction of heat or cold from the Temp-Zone area on selected models of Purifier Cell Logic Biosafety Cabinets to help maintain sample temperature. Rack holds 12 conical 15 mL tubes