Racks, Tube
-
Storage Racks
Thermo Scientific Sun SRiOpen top racks manufactured from polypropylene Open top available for 8, 12 and 15mm diameter vials Colored vial box racks with lid made from high density polypropylene
-
Wireless Tube Racks, Half Size
Globe ScientificFully autoclavable Molded from reinforced nylon for strength and durability with no coatings to chip, peel, or rust Single piece, three tier grid design for secure and stable racking of tubes Good temperature and chemical resistance to withstand a variety of lab procedures Large, flat…
-
-
SmoothRack Test Tube Racks
FTR EnterprisesThe next generation test tube rack is here Holds 72 tubes Available in blue and white Made of autoclavable polypropylene Made in U.S.A. Dimensions: 9.5" x 5" x 2.6" Patent pending When using a SmoothRack a tube will never slip into an adjacent…
-
Biotube System
SimportMicrotiter format rack and tube system Resistant to most research chemicals Autoclavable up to 100 times Can be stored in temperatures as low as -80°C Holds tubes in an 8 x 12 format Ideal for all PCR applications: EIA, RIA, cell harvesting, etc. All components are…
-
Snap-Together Conical Tube Rack
Heathrow ScientificFor 15- and 50mL tubes Easy-to-assemble polypropylene racks snap together securely. Designed for stable use in water baths. Features alphanumeric grid reference aids for tube identification. Shipped flat. Wells for 15 mL tubes measure 17 mm dia; wells for 50 mL tubes measure 28 mm dia.
-
Blue anodized aluminum blocks hold tubes upright and promote conduction of heat or cold from the Temp-Zone area on selected models of Purifier Cell Logic Biosafety Cabinets to help maintain sample temperature. Holds 18 each 0.5 ml microcentrifuge tubes, 7.5 mm in diameter Overall…
-
-
Blue anodized aluminum blocks hold tubes upright and promote conduction of heat or cold from the Temp-Zone area on selected models of Purifier Cell Logic Biosafety Cabinets to help maintain sample temperature. Holds 96 each 0.5 ml microcentrifuge tubes, 7.5 mm in diameter Overall…
-
Rack Tube Conical 15mL 16mm 12 Pos
LabconcoBlue anodized aluminum blocks hold tubes upright and promote conduction of heat or cold from the Temp-Zone area on selected models of Purifier Cell Logic Biosafety Cabinets to help maintain sample temperature. Rack holds 12 conical 15 mL tubes
-
labForce® Benchtop Tube Racks and Storage Boxes
labForce® (powered by Thomas Scientific)labForce® benchtop tube racks and storage boxes are available in a variety of popular configurations. Racks and boxes are available to hold or store tubes from 0.1mL to 500mL.
-
labForce® Benchtop Tube Racks
labForce® (powered by Thomas Scientific)labForce® benchtop tube racks and storage boxes are available in a variety of popular configurations. Racks and boxes are available to hold or store tubes from 0.1mL to 500mL.
-
Rack Tube Flat 50mL 28mm 4 Pos
LabconcoBlue anodized aluminum blocks hold tubes upright and promote conduction of heat or cold from the Temp-Zone area on selected models of Purifier Cell Logic Biosafety Cabinets to help maintain sample temperature. Rack holds 4 flat 50 mL tubes
-
CoolRack® and CoolSink™ modules
Azenta Life SciencesBioCision® thermoconductive modules provide reproducible and standardized temperature control to biological samples while on the bench. Place CoolRack® or CoolSink™ modules on ice, dry ice, liquid nitrogen, water baths, heat blocks (-200°C through 100°C+) or other and they…
-
Stainless Steel Tube Racks
Globe ScientificThese specially shaped "Z" racks are rust proof and will hold up to repeated use. The wide base provides stability and prevents tipping. When not in use, the racks stack neatly inside one another to conserve benchtop space.
-
Test Tube Basket
United Scientific SuppliesThese test tube baskedts are made of polypropylene. These autoclavable, unbreakable, and non-corrosive baskets are ideal for rinsing and draining glassware. They are also useful for storage of test tubes or culture tubes during sterilization or incubation.
-
Poxygrid® 50mL Centrifuge Tube Racks
SP Bel-ArtThis black epoxy-coated rack holds 30mm diameter or smaller centrifuge tubes in a 4 x 6 pattern, 24 tubes per rack. Height: 7.9cm (3.1"); four feet that raise the height an additional 2.1cm (0.81") Heat-cured epoxy coating is unaffected by organic solvents, salts, weak acids…
-
Floating Foam Tube Racks
Heathrow ScientificFloat in small baths as well as large vessels Brightly-colored, high-density polyethylene foam racks are ideal for floating tubes in water baths, tubs, or beakers. Closed-cell foam resists water absorption so racks can be washed and reused. The blue round rack features unique…
-
Universal Tube Rack
DWK Life Sciences (Kimble)Universal Tube Rack will fit tubes from 10mm to 17mm OD. 25 position with patented inner clamps that keep tubes centered and vertical. This rack is dishwaher safe and can be used for temperatures up to 90°C.
-
Rack Tube 6mL 13mm 12 Pos
LabconcoBlue anodized aluminum blocks hold tubes upright and promote conduction of heat or cold from the Temp-Zone area on selected models of Purifier Cell Logic Biosafety Cabinets to help maintain sample temperature. Holds 12 each 6 ml microcentrifuge tubes, 13 mm in diameter
-
Tube Racks
MTC BioMTC Bio’s benchtop tube racks are made of 100% polypropylene and are available in three popular configurations. No. R1030 is a 4-way rack that can be used to hold 4x 50ml, 12x 15ml or 32x micro tubes (0.5, 1.5 or 2ml). They can be snap-linked together to form as large as rack as is…
-
16mm Test Tube Foam Rack (for 15mL centrifuge tubes). Color: Green 50 tube capacity
-
-
WOODEN TEST TUBE RACK, 12-TUBE
United Scientific SuppliesSix 25mm holes, six drying pins, with a 1/2" thick base. Solid hardwood construction. Polished to minimize damage from spills.
-
NMR Sample Tube Rack
SP Bel-ArtPolypropylene rack is steam autoclavable at 121°C (250°F). Dimensions: 21cm x 11cm x 22cm H (8 3/8" x 4 ½" x 8 ¾"). Rugged and stable polypropylene rack is made specifically to support and safely store Nuclear Magnetic Resonance tubes. Upper deck has holes; lower deck has hemispherical wells to…
-
Foam Test Tube Racks
JaeceFoam racks for test tube storage and protection during shipping These economical, charcoal gray, open-cell foam racks have a capacity for 50 tubes in a wide range of sizes. Ideal for storage on benchtops, in incubators and refigerators/freezers. Racks will float for use in waterbaths. Can be…
-
Microcentrifuge Floating Racks
SP Bel-ArtCompact and Economical Incubate up to twenty-four 1.5ml microcentrifuge tubes in a water bath. Easy to load Microtubes are held snugly and then released when the rack is pressed down on a benchtop Dimensions: 11.9 x 7.8cm (4-11/16 x 3-1/16")
-
Epoxy-coated steel wire rack holds 15 conical bottom 15mL centrifuge tubes. Top and middle sections have 18mm square holes and are centered over rails in the base that hold the tips of the tubes. Generously spaced for easy handling Heat-cured epoxy coating is unaffected by organic…
-
Microcentrifuge Tube Rack
SP Bel-ArtSteam autoclavable at 121°C (250°F). Dimensions: 210mm x 70mm x 35mm H (8 ¼" x 2 ¾" x 1 3/8"). Two-level polypropylene rack organized and stores twenty 1.5ml tubes in numbered wells. Tubes protrude 25mm (1") for easy removal.
-
PLASTIC TEST TUBE RACK, ROUND, 12-TUBE
United Scientific SuppliesThis circular 12 place Polypropylene test tube stand has four 25mm diameter holes and eight 19mm diameter holes. The base has matching wells and 16 drying pins surrounded by a trough to catch drippings. Pre-assembled.
-