PCR Lab Well Plates
PCR plates are available in various formats, including 96-well plates, which can hold up to 0.3 mL of good volume when paired with adhesive films or foils. PCR plates are designed with efficiency and can hold multiple samples at once to allow the amplification of many samples, saving you time.
PCR plates can be used alongside PCR instruments, including thermal cyclers, eppendorf and benchtop coolers, designed to heat and cool the samples at precise intervals to amplify the DNA or RNA.
Ensure the plates are appropriately stored to ensure precise, accurate results and avoid cross-contamination.
-
-
-
Made of polypropylene Thin-walled 48-well PCR plates (6 x 8) designed for rapid thermal transfer Each well has a capacity of 0.2 ml Smooth and inert surface on which enzymes and nucleic acids do not bind Flexible design allowing them to be cut into sections Alphanumeric grid to help…
-
PurePlus® 96 Well PCR Plates
LabconLabcon PurePlus® Polymerase Chain Reaction (PCR) consumables are made without additives so you don't need to wonder what is different about the plates, tubes, or strips you are using from one day to the next. Many of our plates are printed with black alpha numeric reference grids to make it…
-
384-Well 480 Plates
SorensonBold-printed PCR plates fit leading thermal cyclers, DNA sequencing detection instruments, and Real-Time PCR instruments. Precision-designed molds and tightly controlled processes create high quality plates with minimal warp before and after thermal cycling. Tight manufacturing tolerances and SBS…
-
No longer throw away half-empty plates after switching to SuperFlex™ low profile "break-away" PCR plates. Low profile SuperFlex™ “Break-Away” 96 well white PCR plate is the most flexible, efficient, and cost-effective option. Eliminate the use of…
-
Pull Bar Magnet PCR Separation Plate
PermagenThe Permagen 96-Well Side Pull Bar Magnet PCR Separation Plate was designed for use in manual and automation applications where pulling beads to one side of the wells is essential. Most PCR plates are bent, leading to inconsistent lab results. Unlike most products, we have added two angled…
-
The Permagen 96-Well Bar Magnet Deep Well Separation Plate was designed for use in manual and automation applications where pulling beads to one side of the wells is essential. From Skirted PCR plates to Deep well microplates the MSPU650 is one of our most accomidating magnets The…
-
Axygen’s 96-well, full-skirt PCR microplates have a working volume of 200ul. Available in a variety of colors.
-
32-Place PCR Racks
Heathrow ScientificDesigned for pre- and post-PCR sampling, streamline your PCR workflow with the 32-Place PCR Rack. This versatile rack accommodates 0.2 mL tubes both individually and in strips of 8, as well as 32-place assay plates (8x4) Space Saving Design • Small and compact design is stackable,…
-
PCR Plates
BrandTech®BRAND PCR plates and tubes are manufactured from high-quality virgin plastics for excellent, reproducible results in most PCR applications. This collection of individual tubes, tube strips, cap strips, 96-well plates, and 384-well plates are manufactured without lubricants or chemical additives…
-
We are proud and pleased to introduce the world's first PCR plate designed to help reduce plastic waste by using earth-friendly biocomposite materials. Superior performance from our 2-component B-Frame® PCR plates Our fully skirted plate fits a wide range of cyclers and is fully…
-
Eppendorf Protein LoBind Plates are specifically designed for use in proteomics or other fields of protein research, where protein concentration tend to be very small and sample recovery is vital for assay results. Significantly more protein can be recovered for downstream analyses and enzymes…
-
Using a cold rack for PCR prep helps maintain stability of the mix. Globe Scientific PCR cold prep racks are designed to be kept in a freezer until time of use. The racks will maintain 4°C on the bench for roughly 3 hours and change color as they warm from 4°C to 7°C. PCR-COLDPSBS…
-
Made of polypropylene For chemiluminescent and fluorescent procedures, the AMPLATE™ -384 is available in opaque white or black. The white plate will increase signal output in both types of assays. It has been developed for high volume laboratory work. It is precision-molded to ensure…
-
96S Super Magnet Plate
PermagenThe Permagen 96S Super Magnet Plate was designed as a direct OEM replacement for either part numbers listed above for use in manual and automation applications. The magnets will form beads into approximately a 4mm ring leaving a clean area near the bottom of the wells for easy aspiration. If…
-
384 Well PCR Plate
Innovative Laboratory Products23A00U182: Optimize your testing with our full skirt, 40ul, 384 well PCR plates; reduce reagent volumes while improving speed and efficiency in your lab. Plates are constructed from low extractable, medical grade polypropylene and frosted to minimize fluorescence from your block. The full skirt…
-
No longer throw away half-empty plates after switching to SuperFlex™ low profile "break-away" PCR plates. Low profile SuperFlex™ “Break-Away” 96 well clear PCR plate is the most flexible, efficient, and cost-effective option. Eliminate the use of…
-
Amplate™ Mats
SimportThis flexible sealing cover is used on 96-well plates along with clip down and screw top thermal cyclers and has been proven to be a secure and effective way of sealing. Since it is reusable, it is a nice way to make this step of the procedure cost effective. Dimples on one side of the mat ensure…
-
Labcon PurePlus® Polymerase Chain Reaction (PCR) consumables are made without additives so you don't need to wonder what is different about the plates, tubes, or strips you are using from one day to the next. Many of our plates are printed with black alpha numeric reference grids to make it…
-
Half-, full- or elevated skirt 200 µL well volume Certified DNase- and RNase-free Thermowell and Thermowell® GOLD 96-well PCR microplates feature a rigid construction that is ideal for automation. Thermowell GOLD 96-well PCR microplates are offered in five formats to maximize flexibility. The…
-
-
twin.tec® real-time PCR Plates
EppendorfEppendorf twin.tec real-time PCR Plates offer all the advantages of regular twin.tec plates and give you the advantage of white wells for your real-time PCR. The limiting factor in low volume real-time PCR is often the remaining intensity of fluorescence. The white wells of the Eppendorf twin.tec…
-
Labcon PurePlus® Polymerase Chain Reaction (PCR) consumables are made without additives so you don't need to wonder what is different about the plates, tubes, or strips you are using from one day to the next. Many of our plates are printed with black alpha numeric reference grids to make it…
-
Made of polypropylene These opaque 96-well PCR plates are for chemiluminescent and fluorescent procedures. Each well has a capacity of 100 µl. Thin-walled and designed for rapid thermal transfer. They are precision-molded to ensure well-to-well and plate-to-plate uniformity. All…
-
96 Round Well U-Bottom Plate
Innovative Laboratory ProductsThis 7mm round well U-bottom plate combines optimized mixing and storage with automation friendly design. Sturdy and warp resistant, with ultra-flat surfaces and rigid construction, this plate ideal for high throughput screening, sample collection, compound storage, screening, mixing, and…
-
RigiFrame® 96 Well PCR Plate, Low Profile
labForce® (powered by Thomas Scientific)RigiFrame® PCR plates, by labForce® (a Thomas Scientific Brand), are designed to support your PCR and qPCR applications using high-quality standards and materials, making them a reliable choice in your applications. The Ultra Rigid fully skirted frame remains…
-
Made of polypropylene Amplate™ Raised Rim thin wall PCR plates are the latest addition to the wide range of Simport® PCR products. Offering just the right rigidity for automation, these four 96-well plates, made in a standard 8 x 12 configuration, are perfectly suited for high…