Ross® Sure-Flow Easy cleaning in waste-waters, food samples, colloids, soils and slurries Has optimum flow rate for high purity waters, drinking waters and buffers Produces fast, stable responses in samples that vary in temperature pH range is 0-14 over a temperature range of…

Dry Contact Technology Dry Contact Technology replaces traditional liquid or gel-filled ISE's. Dry contact electrodes require no preconditioning. Simply place electrode in a sample and read results. This innovative technology offers unlimited shelf life and greater measurement stability. …

The labForce® pHE-06 3-in-1 pH/Temp electrode sensor is a temperature compensated pH Electrode, designed for viscous and low ion concentration samples' pH testing, and ideal for titration. The electrode is compatible with TRIS buffer solutions. The moveable sleeve junction on the…

These economical electrodes are ideal for field, clean water, and general-purpose applications. Single-junction, epoxy-body, gel-filled pH electrodes Pin-type junction provides low electrolyte flow for long life High range of 0 to 14 pH 3 foot (1 meter) cable

Electrode holders and stands Electrode holders and stands permit one-handed operation of electrode movement Four-position holders allow simultaneous use of pH or ISE electrode and reference half cell Swing arm stand (0732H82) allows flexible movement of electrodes. Holder…

The Orion 8411BN ROSS™ Sodium and Orion 8611BNWP ROSS Sodium Combination Electrodes allow sodium in aqueous solutions to be measured quickly, accurately, and economically. With its unique redox internal system, the ROSS electrode provides faster response, greater stability and accuracy than…

Direct pH measurement on paper and leather is fast and accurate with the HI 99171 pH meter. HI 99171 utilizes a flat tip probe designed to optimize surface contact with the sample. pH measurement of papers and cartons is important, not only in the production phase, but also in the packaging…

Combined glass pH electrode with a movable easy-to-clean glass sleeve junction. Plug & Play sensor with integrated sensor chip for secure handling. Especially suitable for acid/base titrations that require fast response times and quick signal equilibration in nonaqueous matrices: …

Solid State Technology Solid State electrodes have solid, homogeneous sensing elements. They are more rugged and easier to clean than glass or membrane sensors. Polishing strips for the solid state sensors are included with the electrode. Thomas also offers a half-cell version that…

Solid State Technology Solid State electrodes have solid, homogeneous sensing elements. They are more rugged and easier to clean than glass or membrane sensors. Polishing strips for the solid state sensors are included with the electrode. Thomas also offers a half-cell version that…

Time is Precious Liquid filled electrodes are reliable workhorses, constructed for efficient pH measurements in daily laboratory use of a wide application range. For more complex sample matrices like emulsions or biological media, electrodes with a sleeve junction are recommended. InLab…

No membranes to change - just replace the sensor once a year Probe stores wet or dry

With an integrated temperature sensor, this maintenance-free gel-filled electrode covers most applications and offers automatic temperature compensation. Special features Unbreakable, chemically resistant POM shaft Integrated NTC 30 kΩ temperature probe Application …

Solid State Technology Solid State electrodes have solid, homogeneous sensing elements. They are more rugged and easier to clean than glass or membrane sensors. Polishing strips for the solid state sensors are included with the electrode. Thomas also offers a half-cell version that…

pH combination electrode with plug head, Glass shaft, platinum junction, electrolyte KCl 3 mol/l, Silamid®-reference system, sphere membrane, A-glass, tapper NS 14.5, length 103 mm 10 mm Ø, -5...+100 °C, 0...14 pH

Sealed, single-junction electrode for general-purpose applications Epoxy body for impact resistance and durability Bayonet Neill-Concelman (BNC)-connected combination reference and measuring cell, for ease of use and to provide tight coaxial cable connections Small (6 mm) diameter for…

Genuine Hamilton electrolytes are needed to keep your laboratory sensors running smoothly. Complete the maintenance on your sensor by using Hamilton cleaning and storage solutions to ensure high accuracy and long life.

The labForce® pHE-07 Flat pH Electrode is a general purpose, lab or field electrode offering affordable, low maintenance performance for water applications where a flat shaped pH sensor is more suitable. Features: Plastic body with standard 12mm diameter and 120mm length. Flat pH…

All-in-One electrodes feature a built-in temperature sensor for taking readings with Automatic Temperature Compensation (ATC). Single junction electrode for field, clean water, and general purpose applications. Electrode is 12 mm diameter with a 3 foot cable Electrode has a epoxy body,…

Orion™ Electrode Extension Cables (4153X33 & 1212U41) Extend the length of an electrode cable by 15′ (4.57m) when using the Thermo Scientific™ Orion™ Electrode Extension Cables. Can be used with Orion ATC probes, any reference electrode with 2mm pin tip connector or…

Orion Triode 3-in-1 Probe is a practical solution for field and plant use. The pH/Reference/ATC probes are all in one body. It's non-refillable, little or no maintenance required. You get portability and accuracy in one package.

Backed by our commitment to accurate and precise measurement, the OHAUS Starter Series of electrodes are designed to produce exact results time and time again. The Starter Series includes pH, reference, oxidation-reduction potential (ORP), conductivity, dissolved oxygen (DO), and temperature…

The labForce® pHE-04 Combination pH Electrode is ideal for precise regular water solutions pH measurement in scientific research and quality control. This electrode is compatible with TRIS buffer solutions. Its blue hemispherical glass membrane has a faster response time, better…

Solid State Technology Low maintenance High accuracy Robust, rugged and reliable Solid State electrodes have solid, homogeneous sensing elements. They are more rugged and easier to clean than glass or membrane sensors. Polishing strips for the solid state sensors are included…

Dry Contact Technology High accuracy Unlimited shelf life, can be stored dry No pre-conditioning or user maintenance required Robust, rugged and reliable Dry Contact Technology replaces traditional liquid or gel-filled ISE’s. Dry contact electrodes require no…

The labForce® pHE-08 Semi-Micro Electrode is a general purpose, lab or field electrode offering affordable, low maintenance performance for applications needing a small diameter body housing (6mm) and is also longer than standard (150mm). Features: Plastic body with 6mm diameter and…

Unique Glass Membrane - The PHE-17 pH electrode uses a micro cylindrical glass membrane (4mm in diameter), making micro-sample pH testing easier than ever, and can be tested in high-temperature samples (up to 212°F). The stainless steel protective cover ensures the durability of the slim glass…

Dry Contact Technology Dry Contact Technology replaces traditional liquid or gel-filled ISE's. Dry contact electrodes require no preconditioning. Simply place electrode in a sample and read results. This innovative technology offers unlimited shelf life and greater measurement stability. …

All-in-One double junction electrode features a built-in temperature sensor for taking readings with Automatic Temperature Compensation (ATC). For most applications, including dirty water, heavy metals and organics applications. Each electrode is 12 mm diameter with a 3 foot cable Each…

Always Ready Well-equipped for challenging tasks. The highly robust PEEK shaft in combination with the open junction makes the InLab Expert both resilient and easy to handle. Its solid reference electrolyte requires no refilling and is always ready for use. If highest performance is expected,…

Orion ISE Reconditioning Solution for Sodium Electrode. 475mL (1 pt.)

The ROSS series of electrodes provide readings stable to 0.01 pH in less than 30 seconds, even in the extreme case of samples varying from one another by 50°C or more. Results are three to five times more precise than those obtained with conventional electrodes. And, because drift is less than…