Glass Ph Electrode

Compare Tool

Select up to 3 products

Glass Ph Electrode
1 - 32 of 88
Sort
View
Show

  • InLab® pH Sensors for Fast Results

    Mettler Toledo

    …combination pH electrode with S7 screw head for general laboratory applications; fast and highly chemical resistant. InLab Science Pro-ISM: A glass-body, combination pH electrode with integrated temperature probe, MultiPin™ head, bridge electrolyte and movable glass sleeve junction.…

  • BlueLine 25-2 pH Electrode

    SI Analytics

    Plastic shaft, fibre-junction, gel electrolyte Ag/AgCl-reference system, cylinder membrane A glass, 2 m fixed cable with BNC plug, length 120 mm, 12 mm Ø -5...+80 °C, 0...14 pH

  • ROSS PerpHect pH Electrode

    Thermo Scientific Orion

    The Orion ROSS® micro pH electrode is specifically designed to measure small samples. This unique design offers greater durability than conventional micro pH electrodes while providing all the performance benefits of a ROSS® electrode. The refillable glass ROSS micro pH electrode is compatible with…

  • DGi116-Solvent Plug & Play Combined Glass pH Electrode

    Mettler Toledo

    Combined glass pH electrode with a movable easy-to-clean glass sleeve junction. Plug & Play sensor with integrated sensor chip for secure handling. Especially suitable for acid/base titrations that require fast response times and quick signal equilibration in nonaqueous matrices: …

  • Science pHT pH Electrodes

    YSI

    pH electrode with temperature, double-junction, Platinum junction, 3 in 1, glass shaft with 1-m cable, BNC connector, 1 banana plug, NTC 30 kOhm. Dimensions = 170 mm length; 12 mm OD. 1198F12: Science pHT-G; pH electrode with temperature, double-junction, 3 in 1, ground joint junction, glass

  • Combination Electrodes

    Sensorex

    …incorporates glass electrode and sealed Ag-AgCl reference electrode in a single stem Range pH 0 to 14, 0° to 100°C Usable at pressures from 0 to 100 psig (690 kPa) Offered in choice of types, each with US Standard or BNC Connector The flat-tip electrodes have pH electrode

  • TruLine pH Electrodes

    YSI

    …TruLine pH 15; pH electrode with temperature, single-junction, 3 in 1, refillable, glass shaft with 1-m cable, BNC connector, 1 banana plug, NTC 30 kOhm. Dimensions = 120 mm length; 12 mm OD. 1198F02: TruLine pH 17; pH electrode no temperature, single-junction, combination, refillable, glass

  • Special SenTix® pH Electrodes

    WTW

    Specialists for all cases - pH electrodes for special applications can determine the pH value of surfaces, suspended solids, suspensions and much more Wide selection of special measurements Adaptation to the sample consistency by special glass membranes Optimal measuring accuracy by…

  • IntelliCAL™ PHC735 RED ROD pH Electrode for Dirty Samples

    Hach

    …deliver exceptionally fast response times and stable, accurate measurements. It has a high-flow annular ring junction and is ideal for measuring pH of “dirty” samples, including wastewater and food and beverage applications. Red Rod technology provides fast, accurate and…

  • SenTix® pH Electrodes

    WTW

    …high-quality membrane glasses pH electrodes with gel electrolyte are ideal for portable measurement but also for routine measurement in the lab. The electrodes are available with and without built-in temperature sensor. We especially recommend these pH electrodes for all applications, where…

  • InLab® Glass pH Electrodes

    Mettler Toledo

    METTLER TOLEDO Glass pH Electrodes

  • IntelliCAL™ PHC705 RED ROD General Purpose pH Electrode

    …technology to deliver exceptionally fast response times and stable, accurate measurements. It has a porous pin junction and is ideal for measuring pH in a variety of laboratory applications. Red Rod technology provides fast, accurate and reproducible measurements Red Rod reliability when…

  • DGi111-SC Plug & Play Combined Glass pH Electrode

    Mettler Toledo

    Combined glass pH electrode with a ceramic frit for direct pH measurement and acid/base titrations in aqueous medium. The all-rounder for a large variety of uncritical applications in almost all kinds of industries. Features and Benefits Sensor Chip Large U-cone glass membrane,…

  • DGi113-SC Plug & Play Combined Glass pH Electrode

    Mettler Toledo

    Combined glass pH electrode with a movable easy-to-clean sleeve junction. Acid/base titrations in non-aqueous media. The all-rounder for uncritical non-aqueous sample matrices. Plug & Play sensor with integrated sensor chip for secure handling. Features and Benefits Sensor Chip …

  • DGi115-SC Plug & Play Combined Glass pH Electrode

    Mettler Toledo

    Plug & Play combined glass pH electrode with a fixed ground-glass sleeve junction. The large sleeve junction provides a stable measurement signal thanks to a uniform flow of electrolyte. The junction is hardly blocked by precipitates and is easy to clean. Direct pH measurement and acid/base…

  • Orion Glass Comb Spear Tip pH Electrode, S / Cap

    Thermo Scientific Orion

  • LE410 pH Electrode

    Mettler Toledo

    Refillable glass pH electrode with integrated temperature probe, accurate and fast measurements for a wide range of sample types. Special features Fast measurement in aqueous solution Integrated temperature probe Refillable reference electrolyte

  • Electrode Storage Solution

    Ricca Chemical

    For storing pH glass and combination electrodes

  • N 6480 Eth pH Electrode

    SI Analytics

    pH electrode for titrations in non-aqueous media, Glass shaft, ground joint-junction, electrolyte L 5034, Ag/AgCl-reference system, sphere membrane, A-glass, length 170 mm, 12 mm Ø, 0...+40 °C, 0...14 Ph

  • DX223-Na Sodium Half-Cell Electrode

    Mettler Toledo

    An electrode for determining the sodium concentration of samples such as food, biological fluids and cooling water. The sodium electrode has a similar construction to a normal pH electrode but uses membrane glass with a higher selectivity for sodium. The electrode has a fast response time and…

  • Electrode Cleaning Solutions

    Mettler Toledo

    …cleaning junctions with protein contamination. Treatment takes approximately 1 hour. Thiourea solution is for cleaning junctions with silver sulphide contamination. Treatment is until clean. Reactivation solution is for regeneration of glass end electrodes. Treatment is approximately one minute.

  • Combination pH Electrodes

    Corning

    …Features rugged glass bulb specially formed to enable penetration of meat, cheese, soils and other materials Range pH 0-14, at temperatures from 0° to 100°C. Non-replaceable junction. Combination with ATC (4136S51) General purpose plastic electrode combines pH, reference…

  • Aldrich® glass reference electrode General purpose, reference, Ag/AgCl

    MilliporeSigma

    Application pH, titrations General Description The reference electrode is used as a pair with an indication electrode to make a measurement. All types supplied with a 30 in. lead. All reference half-cells have a universal reference pin connector. Legal Information Aldrich is a…

  • IntelliCAL™ PHC74501 RED ROD pH Electrode for Challenging Samples

    Hach

    …technology to deliver exceptionally fast response times and stable, accurate measurements. It has a sleeve type junction and is ideal for measuring pH in a variety of “challenging” applications, including wastewater influent and other solutions prone to clogging traditional junctions. …

  • ROSS® Sure-Flow® pH Electrodes

    Thermo Scientific Orion

    pH range is 0-14 over a temperature range of 0°-100°C Epoxy Body Combination Electrode recommended for rugged conditions and field use. Epoxy Body Combination Semi-Micro Electrode recommended for small sample volumes and micro/titrations, includes bulb guard. Glass Body…

  • Orion Electrode Storage Bottle, 3 Pk

    Thermo Scientific Orion

    Storage bottle for protecting electrodes between uses. For use with Glass body 12mm electrode

  • ROSS® Ultra reference half-cell electrode with glass body and pin tip connector

    Thermo Scientific Orion

    …of sample composition or temperature. pH response is independent of temperature changes. Electrode Includes a 60 ml bottle of ROSS electrode fill solution, 810007. It is compatible with with 8101BNWP, 8101SC ROSS pH half-cell or 8411BN ROSS sodium half-cell electrodes. Dimensions: 120 x 12mm .

  • IoLine 3-in-1 pH Electrodes

    YSI

    … IoLine - 3 in 1; pH electrode with temperature, triple-junction, Iodine/Iodide reference, 3 in 1, refillable, glass shaft with 1-m cable, BNC connector, 1 banana plug, NTC 30 kOhm. Dimensions = 120 mm length; 12 mm OD. 1198F10: IoLine Micro - 3 in 1; pH electrode with temperature,…

  • Micro Combination pH Electrodes

    …with most laboratory pH meters Well-suited for biological assays; use in containers such as 96-well plates, microcentrifuge tubes, culture tubes, serum cups, and NMR tubes Virtually unbreakable - feature solid-state sensor and Teflon® capillary tube Electrode is totally non-glass…

  • pH Combination Electrodes

    Mettler Toledo

    glass membrane Contains no poisonous heavy metals but consists solely of non-polluting silver/silver chloride components. An Argenthal element developed by Ingold provides a lead-off system which offers outstanding stability even at high temperatures, extending the life of the electrode. pH

  • COMBINATION pH ELECTRODES AND ACCESSORIES

    Thermo Scientific Orion

    Conduct routine pH measurements with the Thermo Scientific™ Orion™ Economy Series pH Combination Electrode, a routine wick junction, gel-filled electrode. Its unbreakable epoxy body extends beyond the pH sensing glass bulb for rugged conditions. It provides durability for lab or field…

  • Flat Surface, Single-Junction pH Electrodes

    Oakton

    These single-junction electrodes are available with sealed epoxy body, or refillable glass body.  Ideal for flat surface measurements such as paper or skin

Compare Tool

Select up to 3 products

Please Log In

Don't have an Account? Create one now.