3621 Carver® Model C: Full-size 12-ton (10.9 metric ton) Carver hydraulic laboratory pellet press that accepts 13 mm, 31 mm, 35 mm, and 40 mm pellet die sets. Manually controlled. Ideal for pressing sample pellets for XRF, IR, and other analytical techniques. Typical samples include cement,…

For 6801 and 6871 Vial Sets. Polycarbonate is durable but should be cleaned with detergent and water, not organic solvents. Sold in units of 4. NOTE: These products are only available for sale to Domestic U.S. Customers.

Mid-Size Cr-Free Grinding Vial Set: For grinding electronic components to test for chromium under RoHS/WEEE directives. Cr-free ASTM 06 steel impactor and end plugs, polycarbonate center cylinder (6881C). Vial set consists of one complete vial and three spare cylinders. Sample capacity up to 25…

Hardened Steel Grinding Container: Grinding container with puck, dish, and lid made of 52-100 hardened tool steel. 6.9 in. diameter x 2.9 in. high, 17.5 lbs. (17.5 cm x 7.5 cm, 8 kg). Nominal volume 340 mL, recommended grinding load 20-50 mL. Includes puck, ring, dish with Oring gasket, and lid. …

Each 6870 Freezer/Mill® is supplied with your choice of 6870L Large Vial Accessory Package or 6870S Small Vial Accessory Package. The 6870 Freezer/Mill® can hold up to four small vials* (6751, 6761, 6771) or one mid-size vial (6881, 6883, 6885) The Accessory Package for mid-size vials must…

For grinding soft tissues without metal contamination. End plugs and center cylinder are polycarbonate, impactor is polycarbonate-encapsulated steel. Set includes one complete vial plus three spare center sections. Sample capacity 0.5 mL to 4.0 mL

Large Stainless Steel Center Cylinder for 6801: For 6801 Vial Set. Used in place of 6801C when polycarbonate cylinder is not compatible with sample. Made of nonmagnetic stainless steel. Extractor/Vial Opener for Large and Mid-Size Grinding Vials: The Extractor/Vial Opener lifts vial sets in…

For 6751 vial set; sold in units of 4. Also sold in units of 20. Polycarbonate is durable but should be cleaned with hot water and detergent, not organic solvents. NOTE: These products are only available for sale to Domestic U.S. Customers.

The 6775 Freezer/Mill® is a small cryogenic mill that processes samples ranging from 0.1 - 5 grams. It is specifically designed for cryogenic grinding and pulverizing of tough and/or temperature sensitive samples immersed in liquid nitrogen. The new high resolution display is user-friendly and…

Vial sets are an alternative to titer plates. These vial sets are pre-cleaned with grinding balls included. They come in sturdy carriers that have about the same footprint and height as deep-well titer plates, and fit the Geno/Grinder Clamp. Vials can be filled and sealed individually, and the…

Steel Ball Set, 2 x 1/2 in & 4 x 1/4 in: Two 1/2 in. (12.7 mm) and four 1/4 in. (6.35 mm) steel balls for SPEX SamplePrep 8001 and 8009 Vial Sets. Polystyrene Vial w/Screw-On Cap: For wet or dry mixing of liquids and powders. Vial size 21/8 in. (5.4 cm) diameter x 21/2 in. (6.7 cm)…

2190 Vial Rack : Holds 24 3116PC vials, 24 2241-PC vials, or 24 2241-PE vials. All three vials hold a single 3/8 in. (9.5 mm) steel grinding ball 2195 Large Capacity Clamp Assembly : An oversize clamp that will hold centrifuge tubes or a double load of titer plates. Designed to hold twelve…

Multiple Sample Adapter for Seven 1/2 Inch Vials: Holds seven vials, each 1/2 in. (12.7 mm) in diameter, for simultaneous running in 8000M Mixer/Mill®. Suitable vials include SPEX SamplePrep 3111, 3114, 3116 and 3117. Vials run at one time should be same length. Can be used in 8000D…

High-energy ball mill with dual clamps that accommodates sample sizes ranging from 0.2 - 10 grams. Ideal for grinding dry, brittle samples, mechanical alloying, slurry grinding, blending powders, and mixing emulsions. Typical samples include rocks, minerals, sand, cement, slag, ceramics, catalyst…

A holding station for samples which must be kept chilled to preserve RNA for extraction. The insulated outer jacket of the Cryo-Station is chilled with liquid nitrogen and can be filled automatically or manually. Two titer plates can be placed in the Cryo-Station well to be filled and kept cold.…

Large ceramic grinding cylinders with angle-cut ends for use with standard 50 mL centrifuge tubes. Useful for mixing samples for extraction methods such as pesticide residue analysis (QuEChERS) or extracting oil from fish and seafood. The angle-cut ends help the cylinders to shear the sample matrix…

2100 Grinding Ball Dispenser: Simultaneously dispenses one 5/32 in. (4 mm) steel grinding ball (2150) into each well of a standard 96-well titer plate, including 2200 and 2210 titer plates. 2110M 24-Pin Magnet: 24 magnet-tipped pins on plate with handle. Inserts or removes 3/8 in. (9.5 mm)…

Molecular Biology Grade Grinding Beads are treated to inactivate contaminating enzymes and have been tested accordingly. Low Binding Grinding Beads are coated to reduce non-specific binding of nucleic acids and proteins and are used for lysing dilute samples of cells. Acid Washed Grinding Beads are…

Microvial Set: Three 6753V Microvials with holder. Each 6753V has stainless steel end plugs, center cylinder and impactor. Holder contains three 6753V Microvials for simultaneous operation. Sample capacity 0.1 – 0.5 mL each. Microvial Sample Extraction Tool: For removing ground…

Polystyrene Vial w/Slip-On Cap, 0.5 x 1 inch: 1/2 in. (12.7 mm) diameter x 1 in. (25.4 mm) long. Includes slip-on polyethylene cap. Volume 2.5 mL; mixing load approximately 1 mL. Accepts SPEX SamplePrep 3112 or 3119 methacrylate balls. Methacrylate Balls, 3/8 inch: Methacrylate Balls 3/8…

Small Stainless Steel Center Cylinder For 6751 vial set. Replaces 6751C when sample contact with plastic is not advised. Made of nonmagnetic stainless steel.

PrepAid Propylene Glycol - (C3H8O2) (1224F31): Liquid grinding aid, 25 grams (approximately 24 mL) in dropper bottle. Instructions included. PrepAid Cellulose Binder - (C6H10O5)n (1224F32, F33): = 20 µm powder, 150 g bottle. Can be blended with sample at 10% by weight to form XRF…

For grinding soft tissues without metal contamination. End plugs and center cylinder are polycarbonate, impactor is polycarbonateencapsulated steel. Vial set includes one complete vial plus three extra center cylinders. Sample capacity up to 25 mL. Must be used with 6884 and 6886 Adapters.

The Geno/Grinder® is an automated high-throughput plant & animal tissue homogenizer and cell lyser.  It is equipped with an adjustable clamp that accommodates a full range of sample vials from 2mL to 50mL centrifuge tubes or up to six deep-well titer plates.  It is specifically…

Grinding vial intermediate in size between 6751 and 6801: sample capacity up to 25 mL. Stainless steel end plugs and impactor, polycarbonate center cylinder (6881C). Set includes one complete vial plus three extra cylinders. Must be used with 6884 and 6886 Adapters.

Extractor/Vial Opener for Small Grinding Vials: The Extractor/Vial Opener lifts 6700-series vials in and out of the Freezer/Mill, and is used to remove the vial end plugs from the center section. One 6754 is supplied with each 6770 Freezer/Mill and as part of the 6870S Accessory Package. …

Polystyrene Vial w/Slip-On Cap, 3/4 x 2 in.: 3/4 in. (19.1 mm) diameter x 2 in. (50.8 mm) long. Includes slip-on polyethylene cap. Volume 12 mL; mixing load approximately 5 mL. Accepts SPEX SamplePrep 3112, 3119, or 8006A methacrylate balls. Sold in units of 100. Polycarbonate Vial w/SlipOn…

While most titer plates can be used in the Geno/Grinder, these sturdy titer plates have been tested extensively with various samples, and resist perforation by steel grinding balls even at high clamp speeds. They can be used for many applications including sample libraries, mother-to-daughter…

Cryo-Blocks are made of aluminum. They hold and chill titer plates and vials to grind plant and animal tissue for nucleic acid and protein extractions. Cryo-blocks can be quickly chilled in the 2600 Cryo-Station, and will keep samples cold during grinding to preserve RNA and proteins from heat…

For 230 V/50 Hz operation CE Approved LCD display with environmentally safe, push-button membrane switch. Soundproof enclosure reduces noise levels. Equipped with a safety interlock system and lockable casters. Wide choice of grinding containers, sold separately. Features a cam-activated clamp that…

For RoHS/WEEE testing of electronic components for chromium. End plugs and impactor are Cr-free ASTM 06 steel. Will not add Cr to sample like stainless steel components of 6751 Vial. Set includes three extra 6751C cylinders. Sample capacity 0.5 to 4.0 mL.

For grinding electronic components to test for chromium under RoHS/WEEE directives. Cr-free ASTM 06 steel impactor and end plugs, polycarbonate center cylinder (6801C). Will not add Cr like stainless steel components of 6801 vial. Set includes one complete vial plus three extra cylinders. Sample…