Mills

Compare Tool

Select up to 3 products

1 - 32 of 37
Sort
View
Show
  • Ball and Vial Sets

    SPEX SamplePrep

    Polystyrene Vial w/Slip-On Cap, 0.5 x 1 inch: 1/2 in. (12.7 mm) diameter x 1 in. (25.4 mm) long. Includes slip-on polyethylene cap. Volume 2.5 mL; mixing load approximately 1 mL. Accepts SPEX SamplePrep 3112 or 3119 methacrylate balls. Methacrylate Balls, 3/8 inch: Methacrylate Balls 3/8…

  • Multiple Sample Adapter for Seven 1/2 Inch Vials: Holds seven vials, each 1/2 in. (12.7 mm) in diameter, for simultaneous running in 8000M Mixer/Mill®. Suitable vials include SPEX SamplePrep 3111, 3114, 3116 and 3117. Vials run at one time should be same length. Can be used in 8000D…

  • 6775 Freezer/Mill®

    SPEX SamplePrep

    The 6775 Freezer/Mill® is a small cryogenic mill that processes samples ranging from 0.1 - 5 grams. It is specifically designed for cryogenic grinding and pulverizing of tough and/or temperature sensitive samples immersed in liquid nitrogen. The new high resolution display is user-friendly and…

  • Large Grinding Vial Set

    SPEX SamplePrep

    Large Grinding Vial Set: Set includes stainless steel impactor and two end plugs, plus four polycarbonate center cylinders (6801C4). Makes one complete vial plus three spare center sections. Transparent plastic allows visual check of grinding progress. Sample capacity up to 50 mL. Vial Rack…

  • Vial Sets and Balls

    SPEX SamplePrep

    Steel Ball Set, 2 x 1/2 in & 4 x 1/4 in: Two 1/2 in. (12.7 mm) and four 1/4 in. (6.35 mm) steel balls for SPEX SamplePrep 8001 and 8009 Vial Sets. Polystyrene Vial w/Screw-On Cap: For wet or dry mixing of liquids and powders. Vial size 21/8 in. (5.4 cm) diameter x 21/2 in. (6.7 cm)…

  • 2100 Grinding Ball Dispenser: Simultaneously dispenses one 5/32 in. (4 mm) steel grinding ball (2150) into each well of a standard 96-well titer plate, including 2200 and 2210 titer plates. 2110M 24-Pin Magnet: 24 magnet-tipped pins on plate with handle. Inserts or removes 3/8 in. (9.5 mm)…

  • For grinding soft tissues without metal contamination. End plugs and center cylinder are polycarbonate, impactor is polycarbonate-encapsulated steel. Set includes one complete vial plus three spare center sections. Sample capacity 0.5 mL to 4.0 mL

  • While most titer plates can be used in the Geno/Grinder, these sturdy titer plates have been tested extensively with various samples, and resist perforation by steel grinding balls even at high clamp speeds. They can be used for many applications including sample libraries, mother-to-daughter…

  • 8530 Enclosed Shatterbox®

    SPEX SamplePrep

    For 230 V/50 Hz operation CE Approved LCD display with environmentally safe, push-button membrane switch. Soundproof enclosure reduces noise levels. Equipped with a safety interlock system and lockable casters. Wide choice of grinding containers, sold separately. Features a cam-activated clamp that…

  • Extractor/Vial Opener for Small Grinding Vials: The Extractor/Vial Opener lifts 6700-series vials in and out of the Freezer/Mill, and is used to remove the vial end plugs from the center section. One 6754 is supplied with each 6770 Freezer/Mill and as part of the 6870S Accessory Package. …

  • PrepAid Propylene Glycol - (C3H8O2) (1224F31): Liquid grinding aid, 25 grams (approximately 24 mL) in dropper bottle. Instructions included. PrepAid Cellulose Binder - (C6H10O5)n (1224F32, F33): = 20 µm powder, 150 g bottle. Can be blended with sample at 10% by weight to form XRF…

  • Mid-Size Cr-Free Grinding Vial Set: For grinding electronic components to test for chromium under RoHS/WEEE directives. Cr-free ASTM 06 steel impactor and end plugs, polycarbonate center cylinder (6881C). Vial set consists of one complete vial and three spare cylinders. Sample capacity up to 25…

  • Mid-Size Grinding Vial Set

    SPEX SamplePrep

    Grinding vial intermediate in size between 6751 and 6801: sample capacity up to 25 mL. Stainless steel end plugs and impactor, polycarbonate center cylinder (6881C). Set includes one complete vial plus three extra cylinders. Must be used with 6884 and 6886 Adapters.

  • Large Stainless Steel Center Cylinder for 6801: For 6801 Vial Set. Used in place of 6801C when polycarbonate cylinder is not compatible with sample. Made of nonmagnetic stainless steel. Extractor/Vial Opener for Large and Mid-Size Grinding Vials: The Extractor/Vial Opener lifts vial sets in…

  • Cryo-Station

    SPEX SamplePrep

    A holding station for samples which must be kept chilled to preserve RNA for extraction. The insulated outer jacket of the Cryo-Station is chilled with liquid nitrogen and can be filled automatically or manually. Two titer plates can be placed in the Cryo-Station well to be filled and kept cold.…

  • For 6881, 6883, and 6885 Vial Sets. Polycarbonate is durable but should be cleaned with detergent and water, not organic solvents. NOTE: These products are only available for sale to Domestic U.S. Customers.

  • For RoHS/WEEE testing of electronic components for chromium. End plugs and impactor are Cr-free ASTM 06 steel. Will not add Cr to sample like stainless steel components of 6751 Vial. Set includes three extra 6751C cylinders. Sample capacity 0.5 to 4.0 mL.

  • Small Stainless Steel Center Cylinder For 6751 vial set. Replaces 6751C when sample contact with plastic is not advised. Made of nonmagnetic stainless steel.

  • Large ceramic grinding cylinders with angle-cut ends for use with standard 50 mL centrifuge tubes. Useful for mixing samples for extraction methods such as pesticide residue analysis (QuEChERS) or extracting oil from fish and seafood. The angle-cut ends help the cylinders to shear the sample matrix…

  • 3621 Carver® Model C: Full-size 12-ton (10.9 metric ton) Carver hydraulic laboratory pellet press that accepts 13 mm, 31 mm, 35 mm, and 40 mm pellet die sets. Manually controlled. Ideal for pressing sample pellets for XRF, IR, and other analytical techniques. Typical samples include cement,…

  • 8000D Mixer/Mill®

    SPEX SamplePrep

    High-energy ball mill with dual clamps that accommodates sample sizes ranging from 0.2 - 10 grams. Ideal for grinding dry, brittle samples, mechanical alloying, slurry grinding, blending powders, and mixing emulsions. Typical samples include rocks, minerals, sand, cement, slag, ceramics, catalyst…

  • Vial sets are an alternative to titer plates. These vial sets are pre-cleaned with grinding balls included. They come in sturdy carriers that have about the same footprint and height as deep-well titer plates, and fit the Geno/Grinder Clamp. Vials can be filled and sealed individually, and the…

  • For 6801 and 6871 Vial Sets. Polycarbonate is durable but should be cleaned with detergent and water, not organic solvents. Sold in units of 4. NOTE: These products are only available for sale to Domestic U.S. Customers.

  • Cryo-Blocks are made of aluminum. They hold and chill titer plates and vials to grind plant and animal tissue for nucleic acid and protein extractions. Cryo-blocks can be quickly chilled in the 2600 Cryo-Station, and will keep samples cold during grinding to preserve RNA and proteins from heat…

  • Each 6870 Freezer/Mill® is supplied with your choice of 6870L Large Vial Accessory Package or 6870S Small Vial Accessory Package. The 6870 Freezer/Mill® can hold up to four small vials* (6751, 6761, 6771) or one mid-size vial (6881, 6883, 6885) The Accessory Package for mid-size vials must…

  • Molecular Biology Grade Grinding Beads are treated to inactivate contaminating enzymes and have been tested accordingly. Low Binding Grinding Beads are coated to reduce non-specific binding of nucleic acids and proteins and are used for lysing dilute samples of cells. Acid Washed Grinding Beads are…

  • 2010 Geno/Grinder®

    SPEX SamplePrep

    The Geno/Grinder® is an automated high-throughput plant & animal tissue homogenizer and cell lyser.  It is equipped with an adjustable clamp that accommodates a full range of sample vials from 2mL to 50mL centrifuge tubes or up to six deep-well titer plates.  It is specifically…

  • Hardened Steel Grinding Container: Grinding container with puck, dish, and lid made of 52-100 hardened tool steel. 6.9 in. diameter x 2.9 in. high, 17.5 lbs. (17.5 cm x 7.5 cm, 8 kg). Nominal volume 340 mL, recommended grinding load 20-50 mL. Includes puck, ring, dish with Oring gasket, and lid. …

  • Small Grinding Vial Set

    SPEX SamplePrep

    Set includes stainless steel impactor, two end plugs, and four polycarbonate center cylinders (6751C4). Makes one complete vial plus three spare center sections. Transparent plastic allows visual check of grinding progress. Sample capacity 0.5mLto 4.0mL. NOTE: These products are only…

  • Polystyrene Vial w/Slip-On Cap, 3/4 x 2 in.: 3/4 in. (19.1 mm) diameter x 2 in. (50.8 mm) long. Includes slip-on polyethylene cap. Volume 12 mL; mixing load approximately 5 mL. Accepts SPEX SamplePrep 3112, 3119, or 8006A methacrylate balls. Sold in units of 100. Polycarbonate Vial w/SlipOn…

  • Microvial Set

    SPEX SamplePrep

    Microvial Set: Three 6753V Microvials with holder. Each 6753V has stainless steel end plugs, center cylinder and impactor. Holder contains three 6753V Microvials for simultaneous operation. Sample capacity 0.1 – 0.5 mL each. Microvial Sample Extraction Tool: For removing ground…

  • 8000M Mixer/Mill

    SPEX SamplePrep

    High-energy ball mill that accommodates sample sizes ranging from 0.2 - 10 grams. Ideal for grinding dry, brittle samples, mechanical alloying, slurry grinding, blending powders, and mixing emulsions. Typical samples include rocks, minerals, sand, cement, slag, ceramics, catalyst supports, glass,…

Compare Tool

Select up to 3 products

Please Log In

Don't have a web profile? Create one now.