Spex Mill

Compare Tool

Select up to 3 products

Spex Mill
1 - 32 of 42
Sort
View
Show
  • Large Polycarbonate Center Cylinders for 6801 and 6871

    SPEX SamplePrep

    For 6801 and 6871 Vial Sets. Polycarbonate is durable but should be cleaned with detergent and water, not organic solvents. Sold in units of 4. NOTE: These products are only available for sale to Domestic U.S. Customers.

  • 8000D Mixer/Mill®

    SPEX SamplePrep

    High-energy ball mill with dual clamps that accommodates sample sizes ranging from 0.2 - 10 grams. Ideal for grinding dry, brittle samples, mechanical alloying, slurry grinding, blending powders, and mixing emulsions. Typical samples include rocks, minerals, sand, cement, slag, ceramics, catalyst…

  • 8000M Mixer/Mill

    SPEX SamplePrep

    High-energy ball mill that accommodates sample sizes ranging from 0.2 - 10 grams. Ideal for grinding dry, brittle samples, mechanical alloying, slurry grinding, blending powders, and mixing emulsions. Typical samples include rocks, minerals, sand, cement, slag, ceramics, catalyst supports, glass,…

  • Small Grinding Vial Set

    SPEX SamplePrep

    Set includes stainless steel impactor, two end plugs, and four polycarbonate center cylinders (6751C4). Makes one complete vial plus three spare center sections. Transparent plastic allows visual check of grinding progress. Sample capacity 0.5mLto 4.0mL. NOTE: These products are only available…

  • 2010 Geno/Grinder®

    SPEX SamplePrep

  • Microvial Set

    Microvial Set: Three 6753V Microvials with holder. Each 6753V has stainless steel end plugs, center cylinder and impactor. Holder contains three 6753V Microvials for simultaneous operation. Sample capacity 0.1 – 0.5 mL each. Microvial Sample Extraction Tool: For removing ground samples from…

  • Grinding Containers and Accessories

    SPEX SamplePrep

    Hardened Steel Grinding Container: Grinding container with puck, dish, and lid made of 52-100 hardened tool steel. 6.9 in. diameter x 2.9 in. high, 17.5 lbs. (17.5 cm x 7.5 cm, 8 kg). Nominal volume 340 mL, recommended grinding load 20-50 mL. Includes puck, ring, dish with Oring gasket, and lid. …

  • Small Cr-Free Grinding Vial Set

    For RoHS/WEEE testing of electronic components for chromium. End plugs and impactor are Cr-free ASTM 06 steel. Will not add Cr to sample like stainless steel components of 6751 Vial. Set includes three extra 6751C cylinders. Sample capacity 0.5 to 4.0 mL.

  • Large Cr-Free Grinding Vial Set

    For grinding electronic components to test for chromium under RoHS/WEEE directives. Cr-free ASTM 06 steel impactor and end plugs, polycarbonate center cylinder (6801C). Will not add Cr like stainless steel components of 6801 vial. Set includes one complete vial plus three extra cylinders. Sample…

  • Freezer/Mills

    SPEX SamplePrep

    …It is specifically designed for cryogenic grinding and pulverizing of tough and/or temperature sensitive samples immersed in liquid nitrogen. This mill chills samples in liquid nitrogen then pulverizes them with a magnetically driven impactor. The new high resolution display is user-friendly and…

  • 8500 Shatterbox®

    SPEX SamplePrep

    Most popular “swing mill” in America Most efficient way of grinding up to 100 grams of brittle material to analytical fineness Typical grinding time is two minutes or less Resultant particle size well below 200 mesh; with proper grinding aid, less than 10 microns Typical…

  • Racks, Clamps and Holders for the 2000 Geno/Grinder

    SPEX SamplePrep

    2190 Vial Rack : Holds 24 3116PC vials, 24 2241-PC vials, or 24 2241-PE vials. All three vials hold a single 3/8 in. (9.5 mm) steel grinding ball 2195 Large Capacity Clamp Assembly : An oversize clamp that will hold centrifuge tubes or a double load of titer plates. Designed to hold twelve…

  • Carver Hydraulic Laboratory Pellet Presses

    SPEX SamplePrep

    3621 Carver® Model C: Full-size 12-ton (10.9 metric ton) Carver hydraulic laboratory pellet press that accepts 13 mm, 31 mm, 35 mm, and 40 mm pellet die sets. Manually controlled. Ideal for pressing sample pellets for XRF, IR, and other analytical techniques. Typical samples include cement,…

  • Pellet Die Sets and Accessories

    SPEX SamplePrep

    …O-ring vacuum seals, and knock-out ring for sample disk extraction. Load limit 50 tons (45.4 metric tons); weight 10 lbs (4.5 kg). Compatible with SPEX SamplePrep 3617 (38 mm) Spec-Caps. 40 mm Tungsten Carbide Pellets available (3614C). 40 mm Die Sleeve and Plunger: Used with 3614, 40 mm…

  • Ball and Vial Sets

    …polyethylene cap. Volume 2.5 mL; mixing load approximately 1 mL. Accepts SPEX SamplePrep 3112 or 3119 methacrylate balls. Methacrylate Balls, 3/8 inch: Methacrylate Balls 3/8 in. (9.5 mm) diameter; fit all SPEX SamplePrep plastic vials. Stainless Steel Vial Set, 0.5 x 1 inch: 1/2…

  • Mid-Size Polycarbonate Center Cylinders for 6881, 6883, and 6885

    SPEX SamplePrep

    For 6881, 6883, and 6885 Vial Sets. Polycarbonate is durable but should be cleaned with detergent and water, not organic solvents. NOTE: These products are only available for sale to Domestic U.S. Customers.

  • Replacement Parts for 6751 Vial Set

    Small Stainless Steel Center Cylinder For 6751 vial set. Replaces 6751C when sample contact with plastic is not advised. Made of nonmagnetic stainless steel.

  • Ceramic Grind Cyld 3/8"x7/8" angle cut

    SPEX SamplePrep

    Large ceramic grinding cylinders with angle-cut ends for use with standard 50 mL centrifuge tubes. Useful for mixing samples for extraction methods such as pesticide residue analysis (QuEChERS) or extracting oil from fish and seafood. The angle-cut ends help the cylinders to shear the sample matrix…

  • Accessory Packages for the 6870 SPEX SamplePrep Freezer/Mill®

    SPEX SamplePrep

    Each 6870 Freezer/Mill® is supplied with your choice of 6870L Large Vial Accessory Package or 6870S Small Vial Accessory Package. The 6870 Freezer/Mill® can hold up to four small vials* (6751, 6761, 6771) or one mid-size vial (6881, 6883, 6885) The Accessory Package for mid-size vials must…

  • 6775 Freezer/Mill®

    SPEX SamplePrep

    The 6775 Freezer/Mill® is a small cryogenic mill that processes samples ranging from 0.1 - 5 grams. It is specifically designed for cryogenic grinding and pulverizing of tough and/or temperature sensitive samples immersed in liquid nitrogen. The new high resolution display is user-friendly and…

  • 8000D Mixer/Mill® Accessories

    …mixing load approximately 20 mL. Agate Ball, 1/2 in. (12.7 mm): 1/2 in. (12.7 mm) diameter agate ball for SPEX SamplePrep 8014 Vial Set. Clamp/Slurry Grinding w/8003 Grinding Vial: Clamps permit slurry grinding in SPEX SamplePrep 8003 Vial Set; sold in pairs. One pair required for each 8003.

  • Polyethylene Vials with Caps

    …mL. Accepts SPEX SamplePrep 3112, 3119, or 8006A methacrylate balls. Sold in units of 100. Polycarbonate Vial w/SlipOn Cap, 3/4 x 2 in.: 3/4 in. (19.1 mm) diameter x 2 in. (50.8 mm) long. Includes slip-on polyethylene cap. Volume 12 mL; mixing load approximately 5 mL. Accepts SPEX SamplePrep…

  • Tungsten Carbide-Lined Vial Set

    SPEX CertiPrep

    …load 0.5–1.5 mL; mixing load 3 mL. Tungsten Carbide Ball Set, 5/16 in.: 5/16 in. (7.9 mm) diameter tungsten carbide ball; for SPEX SamplePrep 5004 Vial Set. Methacrylate Center Cylinder for 5004: Disposable methacrylate center cylinder; for SPEX SamplePrep 5004 Vial Set.

  • 8530 Enclosed Shatterbox®

    SPEX SamplePrep

    For 230 V/50 Hz operation CE Approved LCD display with environmentally safe, push-button membrane switch. Soundproof enclosure reduces noise levels. Equipped with a safety interlock system and lockable casters. Wide choice of grinding containers, sold separately. Features a cam-activated clamp that…

  • Cryo-Station

    SPEX SamplePrep

    A holding station for samples which must be kept chilled to preserve RNA for extraction. The insulated outer jacket of the Cryo-Station is chilled with liquid nitrogen and can be filled automatically or manually. Two titer plates can be placed in the Cryo-Station well to be filled and kept cold. The…

  • Small Grinding Vials Accessories

    Extractor/Vial Opener for Small Grinding Vials: The Extractor/Vial Opener lifts 6700-series vials in and out of the Freezer/Mill, and is used to remove the vial end plugs from the center section. One 6754 is supplied with each 6770 Freezer/Mill and as part of the 6870S Accessory Package. Vial…

  • Small Polycarbonate Center Cylinders for 6751, 6761, and 6771

    SPEX SamplePrep

    For 6751 vial set; sold in units of 4. Also sold in units of 20. Polycarbonate is durable but should be cleaned with hot water and detergent, not organic solvents. NOTE: These products are only available for sale to Domestic U.S. Customers.

  • Mid-Size Grinding Vial Set

    Grinding vial intermediate in size between 6751 and 6801: sample capacity up to 25 mL. Stainless steel end plugs and impactor, polycarbonate center cylinder (6881C). Set includes one complete vial plus three extra cylinders. Must be used with 6884 and 6886 Adapters.

  • Large Grinding Vial Set

    Large Grinding Vial Set: Set includes stainless steel impactor and two end plugs, plus four polycarbonate center cylinders (6801C4). Makes one complete vial plus three spare center sections. Transparent plastic allows visual check of grinding progress. Sample capacity up to 50 mL. Vial Rack for…

  • Mid-Size Poly-Vial Grinding Vial Set

    For grinding soft tissues without metal contamination. End plugs and center cylinder are polycarbonate, impactor is polycarbonateencapsulated steel. Vial set includes one complete vial plus three extra center cylinders. Sample capacity up to 25 mL. Must be used with 6884 and 6886 Adapters.

  • Small Poly-Vial Grinding Vial Set

    For grinding soft tissues without metal contamination. End plugs and center cylinder are polycarbonate, impactor is polycarbonate-encapsulated steel. Set includes one complete vial plus three spare center sections. Sample capacity 0.5 mL to 4.0 mL

  • Accessories for 6801 Vial Set

    Large Stainless Steel Center Cylinder for 6801: For 6801 Vial Set. Used in place of 6801C when polycarbonate cylinder is not compatible with sample. Made of nonmagnetic stainless steel. Extractor/Vial Opener for Large and Mid-Size Grinding Vials: The Extractor/Vial Opener lifts vial sets in and…

Compare Tool

Select up to 3 products

Please Log In

Don't have an Account? Create one now.