Controls two separate circuits independently Provides precise manual control of heating mantles, tapes, cords and other resistive loads Adjustable output range from 3-100% of rated voltage Use on bench top or mount to lattice work using clamp provided on back panel Will…

This unique set includes matched components to provide a convenient Soxhlet extraction workstation. The setup includes a heating mantle with stirrer, 250ml borosilicate glass boiling flask, 100ml borosilicate glass Soxhlet extractor, 300mm borosilicate glass Allihin condenser with glass connectors,…

Use with heating mantles, tapes, cords, small ovens and other resistive heating loads Digital dual output display for set point and process temperature indication Automatic tuning for accuracy with minimum overshoot Auto cold junction compensation and thermocouple break protection …

This series of analog heating mantles includes a case constructed of durable stainless steel and aluminum materials. The temperature level is adjustable up to 400° C. Knitted mantle is made from glass fiber yarn and designed to securely hold round bottom flasks with the top half of the flask…

Product Highlights Self-supporting: can be placed directly on counter top Easy viewing of flask contents Stackable for easy storage Includes 6-foot (1.8m) power cord with either a NEMA 1-15 (for 120VAC) or NEMA 6-15 (for 240VAC) plug Temperature controller is…

The Series M mantle is the most compact mantle with an aluminum shell that can heat flasks up to 72 liters. Like the Series TM, this mantle has a durable aluminum housing outside and resilient glass fabric inside to support flasks and protect flask walls from thermal strain. Only the bottom of the…

Our OptiChem®; line of heating mantle controllers feature solid-state proportional voltage power control in a compact benchtop design. Controllers provide accurate manual control of heating mantles, tapes and all other resistive loads with an adjustable output range from 5 to 100% of the rated…

The mantle is used extensively in analytical work and in purification of research products with only small samples available. In sizes for spherical flasks 5 to 35mL and pear-shaped flasks 5-250mL. Certification: All 115 volt units are CSA certified. Electrical: Separable 3-ft.,…

This mantle helps prevent vapor condensation in the upper half of a flask during distillation of high-boiling materials. The tops are designed for use with Series M, TM, or STM mantles. They protect the flask, the solutions, and the laboratory from drafts, which would disturb the reflux ration…

EMX Spill-proof Electromantles and EMV V-shaped Electromantles may accommodate 60° funnels, pear-shaped or round botom flasks. They have been designed to accept a large range of flasks and funnel sizes for added flexibility. The stainless steel screen on all EMV models covers the heater…

Glas-Col stocks a variety of the most popular sizes in the three most popular calibrations J, K, and T. These sensors are manufactured to strict specifications using standard limits of error grade wire and 316L grade stainless steel for high corrosion resistance. PTFE Coated thermocouples should…

The series STM mantles perform the same function as series TM heating mantles, plus operations requiring more heat. With an upper internal operating temperature of 650 deg C, these mantles resist burnout. STM1400 and STM1500 have 3 in legs for cool lab benches, are sealed, and have inert gas purge fittings.

BriskHeat HM Metal-Housed Heating Mantles are fiberglass insulated heaters for laboratory and pilot laboratory applications. They are used to heat a variety of round bottom shaped vessels, to either increase temperature or keep media at a constant process temperature. All heating mantles are…

BriskHeat's All-in-one HM metal housed heating mantle with control and magnetic stirrer are fiberglass insulated round bottom flask heaters for laboratory and pilot laboratory applications. These heating mantles provide uniform heat distribution to a variety of round bottom shaped vessels, to…

HM2000 series combination mantles are ideal for repetitive extracting, refluxing, and distillation applications. Units feature space saving built-in electronic power regulator knobs. Available in 3-place and 6-place configurations for maximum safety and convenience. Each unit includes 1 each…

This mantle can accomodate and efficiently heat all types of straight walled metal beakers by preventing contact of heating elements and vessel walls with inner layers of glass fabric. Also available for glass beakers with resilient and pliable interior glass fabric which cradles fragile beakers.…

Heating mantles are preferred to Bunsen burners or hot plates for organic liquids. They provide even heating (no hot spots) and maximum surface coverage for better temperature uniformity. The Series TM spherical flask mantle covers only the flask's bottom half, letting you see its full…

The EMA Electromantle shares all the features of the standard EM Electromantle, but has the added functionality of magnetic stirring. The solid state stirring circuitry is built into the base of the main housing and provides powerful stirring over a range of capacities and viscosities. The stir bar…

BriskHeat HM Metal-Housed Heating Mantles are fiberglass insulated round bottom flask heaters for laboratory and pilot laboratory applications. They are used to heat a variety of round bottom shaped vessels, to either increase temperature or keep media at a constant process temperature. All heating…

For flasks, resin kettles, etc. Constructed of aluminum exterior for extreme durability Form fitting for even heat distribution Internal operating temperature limit of 450°C. Usable with a splash guard or poncho shield for increased safety and life. Certified by Canadian…

The EMEA60500/CE Stirring Multi (Extraction) Mantle with six recesses has a built-in electronic temperature controller and stirring control. It may be used with the FM110 Flow Monitor to cntrol water flow through the glass condenser. The vented case's unique air flow ensures the case remains…

Splash Guards can help prevent mantle damage from chemical spillage and improve operating safety when heating liquids. The shield is appropriate for use with low-wattage mantles (Series M and TM) for flasks, glass beakers, steel beakers, resin flasks, and Buchner funnels. A rugged silicone pad…

This series of digital heating mantles includes a built-in stirrer function. Separate knobs control the temperature level up to 400° C and stirring speed up to 800 rpm. The external probe allows the temperature of the contents of the flask to be directly measured. Case is constructed of durable…

The ideal, no-hassle way to prevent unwanted heat transfer in the lab Three different InsulEze kits can be used alone or in combination to insulate almost any laboratory configuration Can be used as a heat shield, a cold shield, for insulating over heaters, as a shock absorber, as a…

The Multi (Extraction) Mantle with six recesses has a built-in electronic controller and offers a choice of heater only (EME6) or heater/stirrer (EMEA6) combination models. They may be used with the FM110 Flow Monitor. The vented case's unique air flow ensures the case remains…

This mantle's even heat distribution prevents scorching of clear resinous materials. It's one-circuit heat input simplifies temperature control. Resin flask mantles, as well as most other Series O mantles, are available modified to accept vessel drains or other tubulations.

Our controllers feature solid-state proportional voltage power control in a compact benchtop design. Controllers provide accurate manual control of heating mantles, tapes and all other resistive loads with an adjustable output range from 5 to 100% of the rated voltage. All units are supplied with a…

The Series TM Resin Reaction Flask mantle provides even heat distribution to prevent scorching of clear resinous material. One-circuit heat input simplifies temperature control.

Thomas No. 1197F52 is lightweight benchtop unit with cylindrical steel housings (3 3/4 × 3 1/2 in..), gray epoxy finish, polyurethane feet, pilot lamp, 3-wire receptacle (U.S. plug) on a 12 in. cord, and a 4 ft, 3-wire power cord with U.S. plug. Used to control THERMOWELL heating…

The CMUT Electromantle is a multiple volume CMU Electromantle, able to accommodate round bottom flasks of between 250ml to 1000ml capacity. Its key features are otherwise the same as for the CMU Controlled Electromantles. The CMUT Electromantle is used in wet chemistry to heat liquids in round…

Heating Mantles/Stirrers in Self-Standing Metal Case Eliminates need for mantles with holes or very thin insulation that will accommodate separate stirring devices The optional EMC-4 StirControl II (Thomas number 5912M10) creates and synchronizes a rotating magnetic field within the StirMantle…

The Ai ultra-thick 400°C HeatedShield flask cover will keep your distillation setup at the peak of its performance. Prevents vapor condensation in the upper half of a flask and protects the flask and its contents from drafts, which would distrub the reflux ration during fractionation. It…