NuSieve TM 3:1 Agarose is a molecular biology grade, standard melting temperature agarose that yields strong gels for fine resolution of small DNA, RNA, and PCR products ≤ 1 kb. NuSieve TM 3:1 Agarose is designed for analytical electrophoresis rather than in gel reactions or downstream…

FlashGel™ Camera

SYPRO® Ruby is 60-times more sensitive than reversible protein blot stains like Ponceau S, and 30-times more sensitive than Amido Black or Coomassie® brilliant blue stains.

GelBond Film® is a transparent, flexible polyester film designed to support agarose gels. Gels cast on GelBond® Film remain permanently attached to the film through electrophoresis or immunodiffusion and all subsequent fixing, staining, destaining, and drying procedures. GelBond® Film…

Formaldehyde denaturation is suitable when samples are to be recovered from agarose gels. Our Formaldehyde Sample Buffer contains formaldehyde, formamide, and tracking dyes in MOPS Buffer. Supplied in 1.0 ml vials

SeaPlaque™ Agarose is the original low melting temperature agarose. This molecular biology grade agarose produces gels with greater sieving properties and higher clarity than standard melting temperature agarose. The low melting temperature of SeaPlaque™ Agarose makes it ideal for…

IsoGel™ Precast Agarose IEF Plates provide rapid and reproducible isoelectric focusing of proteins up to 2,000 kDa. These plates are specifically designed for the analysis of antibodies. Each precast gel is supported on GelBond® Film to provide easy handling and excellent dimensional…

AccuGENE™ TBE (Tris hydroxymethyl aminomethane) is made from Tris, EDTA and Boric acid. The addition of borate makes TBA a better conductive medium than TAE so it less prone to overheating and better for longer runs. Borate does inhibit some enzymatic reactions, so it is not often used if the…

Lonza’s standard DNA Ladders are ready-to-dilute prior to loading on your gel. Plasmid-free to ensure minimal background. For all of Lonza’s Ladders, each band has an ideal 50% G-C content for rapid, precise sizing and sharp resolution. Our DNA Ladders are free from contaminating…

SeaKem® GTGTM Agarose is a standard gelling temperature, high gel strength agarose that resolves DNA fragments greater than 1,000 bp. This Genetic Technology GradeTM (GTGTM) agarose is specifically designed for preparative DNA electrophoresis and is tested for the presence of proteases, ligases…

AccuGENE™ 10X MOPS Buffer is specially formulated MOPS Buffer for use with Latitude™ and Reliant™ Precast Gels and is manufactured with the same reagents used in our precast gels.

The Reliant™ Gel System consists of precast agarose minigels for rapid and reproducible resolution of DNA fragments from 8 bp to 10 kb. Each precast agarose gel is precision cast using our SeaKem® Gold, NuSieve™ Hi-Res or NuSieve™ 3:1 Agarose and are available…

PCR Products on a NuSieve™ 3:1 Agarose Gel – A 550 bp sequence from lambda DNA was amplified (25 cycles) using primers and Taq DNA polymerase supplied in the GeneAmp® kit (Roche Molecular Systems). PCR products and controls were electro phoresed on a 4% NuSieve™ 3:1 agarose…

SeaKem® LE Agarose was the first and is still the world’s most trusted agarose for nucleic acid electrophoresis. Ideal for routine analysis of nucleic acids by gel electrophoresis and blotting, each SeaKem® LE Gel sharply resolves DNA and provides consistent resolution from…

SeaKem® ME Agarose is a moderate EEO agarose that is often used for serum protein electrophoresis, IEP and occasionally for nucleic acid electrophoresis. With a standard melting temperature and gel strength similar to SeaKem® LE Agarose, SeaKem® ME Agarose is optimized to quickly and…

AccuGENE™Tris- EDTA Buffer is a basic Tris buffer with added EDTA. It is Commonly used as the basis for other buffers such as TAE and TBE, and electrophoresis for DNA/RNA destined for downstream enzymatic processes.

The FlashGel™ DNA Starter Kit (Cat. No. 57026) contains a FlashGel™ Dock, a pack of 1.2% FlashGel™ DNA Cassettes, FlashGel™ Loading Dye and FlashGel™ Marker

SeaKem® HGT Agarose is a high gelling temperature agarose that exhibits high gel strength and clarity and is primarily used the electrophoreisis of proteins. Specifically designed for applications such as counter-immunoelectrophoresis and crossed-immunoelectrophoresis, SeaKem® HGT Agarose…

The proteins in the ProSieve™ Color Protein Marker have been labeled with 3 different fluorescent dyes and the marker is supplied as a lyophilized solid containing the buffer salts and detergent found in the typical Laemmli buffer system. The ProSieve™ Color Protein Marker contains 9…

The ProSieve™ ProTrack™ Dual Color Protein Loading Buffer protects proteins from heat degradation during the sample preparation step, as well against pH changes during the SDS-PAGE run. Some proteins are sensitive to pH changes that result from temperature fluctuations during…

FlashGel™ Recovery Cassettes, 2.2% 8+1 double-tier, 9 pack

AccuGENE™ Sodium dodecyl sulfate is a detergent that is known to denature proteins; It’s used in polyacrylamide gel electrophoresis for the determination of protein molecular weight. It is also used in nucleic acid extraction procedures for the disruption of cell walls and dissociation…

AccuGENE™ Tris Glycine SDS Buffer is a Tris buffer with added glycine. Tris glycine SDS buffer is commonly used to separate protein samples by SDS poly-acrylamide gel electrophoresis (SDS-PAGE). Proteins are separated by size.

GelBond® PAG Film is a transparent, flexible polyester film designed to support polyacrylamide or MDE™ Gels. The acrylamide monomers covalently attach to the coating on the film during the polymerization reaction. Gels remain permanently attached to the film through electrophoresis…

One of Lonza’s highest EEO argaroses, SeaKem® HEEO Agarose is a very high EEO agarose that is useful in applications requiring significant cathodal migration, such as IEP of IgG and IgM. SeaKem® HEEO Agarose can also be used to blend with a lower EEO agarose to achieve a specific EEO…

Reliant™ Precast RNA Gels are ready-to-use RNase free agarose gels suitable for a variety of RNA applications including Northern blotting and analysis of RNA transcripts. Gels are made with 1.25% SeaKem® Gold Agarose in 1X MOPS buffer with no denaturants. Reliant™ Precast…

AccuGENE™Phosphate buffered saline is a buffer solution commonly used in biological research. It is a water-based salt solution containing disodium hydrogen phosphate and sodium chloride. The osmolarity and ion concentrations of PBS are isotonic, so it is often used for protein and cell…

The FlashGel TM Device Pack provides the key components for researchers to quickly begin using and imaging FlashGel TM DNA Cassettes. FlashGel TM DNA Cassettes are the ideal sample screening tools to check up to 32 PCR or restriction fragments quickly without having to plan your day around…

The ProSieve™ QuadColor™ Protein Marker is a mixture of 12 recombinant, highly purified proteins with molecular weights of 4, 6, 10, 15, 25, 40, 55, 70, 100, 140, 170, 250, and 300 kDa. the proteins are individually prestained using four different dyes, producing a brightly colored…

FlashGel TM Recovery Buffer is optimized for direct DNA recovery using FlashGel TM Recovery Cassettes. This eliminates agarose gel preparation, band excision and purification. The FlashGel TM Recovery System delivers highly efficient recovery, free from inhibitors and UV-induced damage, in a…

FlashGel™ System Power Supply

Checking Sample Quality with the FlashGel TM System for RNA – Sample degradation is visible at low levels on the FlashGel TM System for RNA. FlashGel TM RNA Cassette run for 8 minutes at 225 V, followed by 20 minute hold prior to imaging. Lane 1: RNA marker (Lonza); Lane 2: 250 ng E. coli…