This o-ring-free baffled cyclonic spray chamber, made of borosilicate glass, comes standard with NexION Q, X, and D models. It relies on momentum to ef ciently and quickly remove the larger droplets from the sample mist decreasing any opportunity for occlusion or agglomeration of the smaller…

The spray chamber is an integral part of the sample introduction system responsible for filtering the sample mist to permit the appropriate droplet size distribution to reach the plasma. The cyclonic spray chamber relies on momentum to efficiently and quickly remove the larger droplets from the…

The baffled cyclonic spray chamber, made of perfluoroalkoxy alkanes (PFA), is an all-purpose hydrofluoric acid-resistant spray chamber. It features o-ring-free connections to the nebulizer and torch injector, secure, leak-free threaded drain port, internal baffle, and threaded auxiliary port for…

The 32 cm PTFE drain line has a 1/4-28 spray chamber fitting. 160 cm of additional 0.8 mm I.D. drain line tubing is included.

This PTFE-coated Viton o-ring, with an inner diameter of 6.07 mm and width of 1.78 mm, is used for the internal injector support adapter with ELAN 6000, 9000, DRC II, and DRC-e, and NexION 300 and 350 ICP-MS series instruments.

This nebulizer adapter plug 16/6 is used with standard glass cyclonic spray chambers (N0776052) in Optima 2x00 DV, 4x00 DV, 5x00 DV, 7x00 DV, and 8x00 ICP-OES series instruments.

The PC 3 is a small, robust Peltier cooled cyclonic spray chamber. The PC 3 offers the advantages of low memory effects, constant temperature, fast rinse-out, and high sample transport efficiency. The cooled outer walls of the PC 3 spray chamber enhance long-term signal stability, reduce…

This spray chamber adapter is used in the NexION 300 and 350 D/Q/S/X adjustable torch mount assembly (W1037485).

The o-ring-free Tracey spray chamber, made of tetrafluoroethylene (TFE), is designed to be hydrofluoric acid-resistant. It does not have an internal baffle feature. Its precision is considered good and its purity is considered good. They can be teamed with the PolyCon HF-resistant nebulizers to…

This quartz hydride gas-liquid separator is used with all hydrideFAST autosampler systems.

This baffled cyclonic spray chamber, made of borosilicate glass, is an integral part of the sample introduction system responsible for filtering the sample mist to permit appropriate droplet size distribution to reach the plasma. The spray chamber features a sand-blasted neck with EZ seal fitting…

This o-ring replaces the obsolete o-ring N0777844.

The baffled, cyclonic Twister spray chamber has a central transfer tube, which acts as a secondary particle separator, helping separate larger aerosol particles from the sample. This reduces solvent load in the plasma without compromising detection limits. The position of the baffle is carefully…

The baffled cyclonic Twister spray chamber has a central transfer tube, which acts as a secondary particle separator, helping separate larger aerosol particles from the sample. This reduces solvent load in the plasma without compromising detection limits. The position of the baffle is carefully…

The spray chamber is an integral part of the sample introduction system responsible for filtering the sample mist to permit the appropriate droplet size distribution to reach the plasma. It is corrosion resistant and is inert to most mineral acids, including hydrofluoric acid, aqua regia, and all…

This metal ball joint clip with tension screw is used to connect the spray chamber and torch in Optima 4300 V, 5300 V, and 7300 V ICP-OES series instruments.

The water-cooled design permits the introduction of coolant for temperature control. Thermostatting to constant temperature helps ensure highly reproducible results and long term stability. Can also be cooled to suppress volatilization, allowing the direct aspiration of highly volatile solvents…

The 50 mL cyclonic spray chamber, tetrafluoroethylene (TFE), is a hydrofluoric acid-resistant spray chamber. It is o-ring-free.

Laminar flow spray chamber addition gas tee, with F5 fittings and 1/4 PFA gas line fitting, for NexION 300 and 350 ICP-MS series instruments.

The o-ring-free Tracey spray chamber, made of tetrafluoroethylene (TFE), is designed to be hydrofluoric acid-resistant. It does not have an internal baffle feature. Its precision is considered good and its purity is considered good. The TFE Tracey spray chambers are specially treated to ensure…

The SII cyclonic Scott dual spray chamber, made of quartz, is designed to homogenize sample aerosol prior to introduction to the ICP-MS instrument. It features a secure, leak-free threaded drain port, o-ring-free connections to the nebulizer and torch injector, internal baffle, and threaded…

The 50 mL borosilicate glass cyclonic Tracey spray chamber does not feature an internal baffle and is not hydroflouric acid-resistant. It relies on momentum to efficiently and quickly remove the larger droplets from the sample mist decreasing any opportunity for occlusion or agglomeration of the…

This baffled micro cyclonic spray chamber, made of quartz, is designed for use with oil FAST and organics solvent applications. It features secure, leak-free threaded drain port, o-ring-free connections to the nebulizer and torch injector, internal baffle and threaded auxiliary port for addition…

The baffled cyclonic spray chamber, made of quartz, is an all-purpose spray chamber for non-hydrofluoric acid samples. It features o-ring-free connections to the nebulizer and torch injector, secure, leak-free threaded drain port, internal baffle, and threaded auxiliary port for gas addition. The…

This baffled cyclonic spray chamber, made of quartz, is designed for all-purpose, non-hydrofluoric acid applications. It provides excellent sensitivity, stability and low blanks.

This kit includes: Glass Standard Cyclonic Spray Chamber (N0776052) Cyclonic Spray Chamber Mount Kit (N0770131) Cyclonic Spray Chamber Mount Nut (N0776005) Cyclonic Spray Chamber Mount Sleeve (N0776004) Cyclonic Spray Chamber Mount Ring (N0776003) 20 mm M4 Cap Screw (09919167) 6 mm M3 Cap…

The PC 3 is a small, robust Peltier cooled cyclonic spray chamber. The PC 3 offers the advantages of low memory effects, constant temperature, fast rinse-out, and high sample transport efficiency. The cooled outer walls of the PC 3 spray chamber enhance long-term signal stability, reduce…

The AMS spray chamber gas line is included in the NexION 2000 ICP-MS Core Configuration's Sample Introduction Kit (N8150035) and the Productivity Configuration's Sample Introduction Kit (N8150036).

This universal spray chamber adapter is used with hydrideFAST 1 autosampler systems.

This kit includes: 47 mm I.D. PFA Scott Spray Chamber, Qty. 1 (N8122356) Spray Chamber PFA End Cap, Qty. 1 (N8122357) 1.8 mm I.D. Sapphire Injector, Qty. 1 Demountable Quartz Torch, Qty. 1 (N8122006) PFA-100 Contentric Nebulizer, Qty. 2 (N8122351)

The baffled, cyclonic Twister spray chamber has a central transfer tube, which acts as a secondary particle separator, helping separate larger aerosol particles from the sample. This reduces solvent load in the plasma without compromising detection limits. The position of the baffle is carefully…

The 50 mL borosilicate glass cyclonic Tracey spray chamber does not feature an internal baffle and is not hydroflouric acid-resistant. It relies on momentum to efficiently and quickly remove the larger droplets from the sample mist decreasing any opportunity for occlusion or agglomeration of the…