MilliporeSigma HPLC
-
The package contains: 10 PVDF double cones for capillary tubing (1/16") with knurled screw Ordering No. 1.15545 resp. 1.51216.
-
Upchurch PEEK Fingertight Fitting, fitting 10-32 (one-piece)
MilliporeSigmaGeneral description The one-piece fitting, 55067-U, is convenient to use because the ferrule will not stick in a receiving port and can be easliy found if dropped onto the floor. The two-piece fitting features a separate ferrule so you can replace just the ferrule instead of the entire unit.…
-
-
LiChrospher® ADS allows the fully automated, LC integrated sample preparation of hydrophobic, low molecular weight analytes from untreated samples like serum, milk, fermentation broth of food homogenates. The enrichment is based on two chromatographic processes: reversed phase and size exclusion…
-
PTFE Tubing
MilliporeSigmaEconomical, flexible PTFE tubing is ideal for use at pressures up to 500 psi (35 kg/cm2). Use in automatic analyzer, postcolumn reaction, preparative scale systems, in-stream sampling devices, and when monitoring physiologically important compounds. The maximum recommended operating temperature for…
-
MicroTight Adapters
MilliporeSigmaThese adapters will help create a true zero dead volume (ZDV) connection between 1/16" I.D. tubing and capillary tubing. MicroTight Adapters allow connection of 1/16" O.D. tubing directly to 1/32" O.D. and 360 μm tubing.
-
PEEK Tubing
MilliporeSigmaPolyetheretherketone (PEEK) tubing has become a popular replacement for stainless steel tubing in various places in the HPLC system. It is especially useful when contact between the sample and metal components must be avoided, such as when working with metal complexing agents or certain biochemical…
-
Stainless Steel HPLC Fittings ferrule
MilliporeSigmaSynonyms: Valco® FERRULE 1/16 PK 10 Legal Information: Valco is a registered trademark of Valco Instruments Co. Inc.
-
Polyetheretherketone (PEEK) tubing has become a popular replacement for stainless steel tubing in various places in the HPLC system. It is especially useful when contact between the sample and metal components must be avoided, such as when working with metal complexing agents or certain biochemical…
-
Purge/Trap J BTEXTRAP(TM)
MilliporeSigmaTubes used in purge and trap analyses generally are packed with multiple beds of adsorbent materials, so that a broad range of polar and nonpolar, high and low molecular weight compounds can be trapped in a single tube. Each bed protects the next, increasingly active bed, by preventing compounds…
-
PTFE Tubing
MilliporeSigmaEconomical, flexible PTFE tubing is ideal for use at pressures up to 500 psi (35 kg/cm2). Use in automatic analyzer, postcolumn reaction, preparative scale systems, in-stream sampling devices, and when monitoring physiologically important compounds. The maximum recommended operating temperature for…
-
Supelguard(TM) Guard Cartridge Holder Stand-alone
MilliporeSigmaLegal Information: Supelguard is a trademark of Sigma-Aldrich Co. LLC
-
-
SeQuant™ ZIC®-HILIC is your ideal choice for separation of polar and hydrophilic compounds. The zwitterionic stationary phase ensures reproductible retention of all types of compounds that have proved difficult to separate on reversed-phase HPLC columns. ZIC®-HILIC is designed for compounds such as…
-
Supelco® Precolumn Filter Direct-connect, PEEK
MilliporeSigmaDirect-connect; protects analytical and guard columns. Our precolumn filter can be connected directly, hand-tightened, into any HPLC column or guard column that has Valco-compatible end fittings. PEEK cap and body, 2 mum stainless steel frit. For a metal-free system, order PEEK (biocompatible)…
-
Supelco® ColumnSaver Precolumn Filter s
MilliporeSigma•Economical protection for your guard or analytical HPLC column •No wrenches or tools required to install, fingertight to 5,000 psi •Lower dead volume than conventional filters with holders •Universal connection is compatible with all manufacturers fittings· The new Supelco ColumnSaver offers…
-
Polyetheretherketone (PEEK) tubing has become a popular replacement for stainless steel tubing in various places in the HPLC system. It is especially useful when contact between the sample and metal components must be avoided, such as when working with metal complexing agents or certain biochemical…
-
Rheodyne® Injector Rheodyne, 7725i
MilliporeSigmaRheodyne® Injector model is a stainless steel version and comprises of a six-port sample injection valves in which the sample is loaded through a built-in needle port in the front of the valve. Legal Information: Rheodyne is a registered trademark of IDEX Health & Science, LLC
-
PEEK Tubing
MilliporeSigmaPolyetheretherketone (PEEK) tubing has become a popular replacement for stainless steel tubing in various places in the HPLC system. It is especially useful when contact between the sample and metal components must be avoided, such as when working with metal complexing agents or certain biochemical…
-
Upchurch PEEK Fingertight Fitting nut and ferrule 10-32
MilliporeSigmaMaterial: PEEK nut and ferrule Packaging: pkg of 10 ea I.D.: 0.0625 in. (1.5875 mm) Fitting: nut and ferrule 10-32 General description The one-piece fitting, 55067-U, is convenient to use because the ferrule will not stick in a receiving port and can be easliy…
-
PTFE Tubing
MilliporeSigmaEconomical, flexible PTFE tubing is ideal for use at pressures up to 500 psi (35 kg/cm2). Use in automatic analyzer, postcolumn reaction, preparative scale systems, in-stream sampling devices, and when monitoring physiologically important compounds. The maximum recommended operating temperature for…
-
LiChrospher® ADS allows the fully automated, LC integrated sample preparation of hydrophobic, low molecular weight analytes from untreated samples like serum, milk, fermentation broth of food homogenates. The enrichment is based on two chromatographic processes: reversed phase and size exclusion…
-