Peek Fittings

Compare Tool

Select up to 3 products

Peek Fittings
1 - 32 of 45
Sort
View
Show
  • PEEK Fitting Extractor

    Restek

    Drill into the broken fitting, then screw the extractor into the fitting and remove it easily. Eliminates the need for heat or other techniques that could damage your column.

  • PEEK Fingertight Fittings

    SGE

  • PEEK tip standard fittings

    PerkinElmer

    PEEK tips are constructed with maximum corrosion resistance.

  • Upchurch PEEK Fingertight Fitting, fitting 10-32 (one-piece)

    MilliporeSigma

    fitting, 55067-U, is convenient to use because the ferrule will not stick in a receiving port and can be easliy found if dropped onto the floor. The two-piece fitting features a separate ferrule so you can replace just the ferrule instead of the entire unit. The Upchurch PEEK Fingertight fittings

  • Upchurch PEEK Fingertight Fitting nut and ferrule 10-32

    MilliporeSigma

    fitting, 55067-U, is convenient to use because the ferrule will not stick in a receiving port and can be easliy found if dropped onto the floor. The two-piece fitting features a separate ferrule so you can replace just the ferrule instead of the entire unit. The Upchurch PEEK Fingertight fittings

  • VHP Fittings

    Agilent Technologies

    …ferrule in PEEK. The fitting can be used throughout the flow path, but because it can be re-used without losing tightness, it is especially suitable for the connection between the heat exchanger and the column. This new and improved fitting replaces the standard stainless steel Swagelok fitting.

  • Hexnut Fittings

    SGE

    Stainless steel 10-32 thread fittings use a non-swaging Kel-F™ or PEEK™ replaceable ferrule Inert contact surfaces make them biocompatible Ideal for applications where corrosive solvents are being used Hexnut with Kel-F™ or PEEK™ ferrules are recommended for use with…

  • EasyLOK Fittings

    SGE

    …Unlike stainless steel, the PEEK™ ferrule will not crush the tubing and can be easily readjusted for quick column changes. The unique double ended ferrule design seals at two points to prevent leaks. The fittings are compatible with any standard female HPLC fitting, including Swagelok®,…

  • PEEK Tubing

    Agilent Technologies

    Flexible and easy to cut to desired lengths Color-coded for easy tracking Accepts both stainless and PEEK fittings 1/16" OD

  • EXP Hand-Tight Fittings

    Restek

    …of titanium with the sealing ability of PEEK Cutting-edge system provides ZDV (zero dead volume) connection to any 10-32 female port Compatible with 1/16" PEEK and stainless steel tubing Restek is pleased to offer the reusable EXP fitting system from Optimize Technologies for the…

  • EXP Hex-Head Fittings

    Restek

    …of titanium with the sealing ability of PEEK Cutting-edge system provides ZDV (zero dead volume) connection to any 10-32 female port Compatible with 1/16" PEEK and stainless steel tubing Restek is pleased to offer the reusable EXP fitting system from Optimize Technologies for the…

  • HPLC PEEK Performance Kit

    Restek

    PEEK Performance Kit is a useful complement to your HPLC system. Includes: Hub-Cap Adapter w/ Cap (1) Tubing Clips (3) Clean Cut Tubing Cutter (1) PEEK Finger Tight Fittings (5) PEEK Column Plugs (5) PEEK 90° Tubing Elbows (2) PEEK 180° Tubing Elbows (2) PEEK

  • Inert PEEK Tubing

    Restek

    Replaces stainless steel, titanium, PTFE, or Tefzel tubing Less oxygen permeable and more temperature resistant (to 100 °C) than PTFE or Tefzel tubing Use with PEEK finger-tight or flangeless fittings Use tubing ≤ 0.007" to 7,000 psi; tubing ≥ 0.010" ID to 5,000 psi

  • Flexible Stainless Steel Capillaries Without Fittings

    Agilent Technologies

    …withstand harsh cleaning procedures. Agilent has engineered a bio-inert PEEK liner clad with high-strength stainless steel to withstand pressures of at least 600 bar. This same technology is used in Agilent capillary fittings – giving you a strong, metal-free, capillary/ connector flow path…

  • 9725 PEEK SAMPLE LOOP 500UL

    PerkinElmer

    …is supplied with two PEEK hex-head nuts and ferrules. These fittings grip the tubing in two locations for a more reliable connection. Rheodyne Sample Loops are made of natural PEEK. This means no dye leaching into your sample. Like metal loops, the size designations of PEEK loops are nominal. The…

  • Survival Kit for HPLC, PEEK

    Restek

    fittings, and tools essential for setting up and maintaining your HPLC system: PEEK tubing, connectors, and elbows, PTFE tubing, a tubing cutter and extra blades, a ValvTool wrench, open-end wrenches, and more. Kit includes: PEEK Column Connector (beige, round body), 10-pk. PEEK

  • PFA-LC Nebulizer PEEK Connection Line

    PerkinElmer

    1/16 O.D. x 0.007 I.D. PEEK connection line, 5 feet in length, for the NexION 2000 ICP-MS PFA-LC Nebulizer. Includes female -28, PFA nebulizer fitting and Black, low-flow nut (M5/10-32).

  • PEEK Unions, Tees, and Crosses for HPLC

    Restek

    Ideal for quickly and reliably connecting PEEK tubing in HPLC systems One-piece, finger-tight fittings—no ferrules required Low dead volume Included end fittings and body made of biocompatible PEEK Available in 0.25, 0.50, and 0.75 mm bore sizes Maximum temperature: 100°C …

  • 5µL PEEK Sample Loop for Model 9725 Rheodyne Injector

    PerkinElmer

    PEEK tubing and fittings. PEEK (Poly-Ether-Ether-Ketone) is a mechanically strong, chemically inert polymer ideal for HPLC applications where metal surfaces may interact with mobile phase or sample components. Each Sample Loop is supplied with two PEEK hex-head nuts and ferrules. These fittings

  • PEEK LC Connector Line for MEINHARD Nebulizer

    PerkinElmer

    1/16 O.D. x 0.007 I.D. PEEK LC connection line, 5 feet in length, for NexION 2000 ICP-MS MEINHARD Nebulizer. Includes 10-32 male nebulizer fitting and Black, low-flow nut (M5/10-32), 150 cm in length.

  • 10µL PEEK Sample Loop for Model 9725 Rheodyne Injectors

    PerkinElmer

    …from PEEK tubing and fittings. PEEK (Poly-Ether-Ether-Ketone) is a mechanically strong, chemically inert polymer ideal for HPLC applications where metal surfaces may interact with mobile phase or sample components. Each Sample Loop is supplied with two PEEK hex-head nuts and ferrules. These fittings

  • 200µL PEEK Sample Loop for Model 9725 Rheodyne Injectors

    PerkinElmer

    …from PEEK tubing and fittings. PEEK (Poly-Ether-Ether-Ketone) is a mechanically strong, chemically inert polymer ideal for HPLC applications where metal surfaces may interact with mobile phase or sample components. Each Sample Loop is supplied with two PEEK hex-head nuts and ferrules. These fittings

  • 100µL PEEK Sample Loop for Model 9725 Rheodyne Injectors

    PerkinElmer

    …from PEEK tubing and fittings. PEEK (Poly-Ether-Ether-Ketone) is a mechanically strong, chemically inert polymer ideal for HPLC applications where metal surfaces may interact with mobile phase or sample components. Each Sample Loop is supplied with two PEEK hex-head nuts and ferrules. These fittings

  • 20µL PEEK Sample Loop for Model 9725 Rheodyne Injectors

    PerkinElmer

    …is supplied with two PEEK hex-head nuts and ferrules. These fittings grip the tubing in two locations for a more reliable connection. Rheodyne Sample Loops are made of natural PEEK. This means no dye leaching into your sample. Like metal loops, the size designations of PEEK loops are nominal. The…

  • 50µL PEEK Sample Loop for Model 9725 Rheodyne Injectors

    PerkinElmer

    …from PEEK tubing andfittings. PEEK (Poly-Ether-Ether-Ketone) is a mechanically strong,chemically inert polymer ideal for HPLC applications where metalsurfaces may interact with mobile phase or sample components. Each Sample Loop is supplied with two PEEK hex-head nuts andferrules. These fittings

  • 5mL PEEK Sample Loop for Model 9725 Rheodyne Injectors

    PerkinElmer

    …from PEEK tubing andfittings. PEEK (Poly-Ether-Ether-Ketone) is a mechanically strong,chemically inert polymer ideal for HPLC applications where metalsurfaces may interact with mobile phase or sample components. Each Sample Loop is supplied with two PEEK hex-head nuts andferrules. These fittings

  • 2mL PEEK Sample Loop for Model 9725 Rheodyne Injectors

    PerkinElmer

    …from PEEK tubing andfittings. PEEK (Poly-Ether-Ether-Ketone) is a mechanically strong,chemically inert polymer ideal for HPLC applications where metalsurfaces may interact with mobile phase or sample components. Each Sample Loop is supplied with two PEEK hex-head nuts andferrules. These fittings

  • PEEK Ari Mist Nebulizer 0.05-1.0 mL/min Uptake Rate for Avio 200/500 and Optima…

    PerkinElmer

    The PEEK Ari Mist ® nebulizer provides very low sample flow and is for samples that are particlate free. Operates on stand pressures of 40 - 50 psi. Fits regular spray chambers as a direct replacement for glass concentric nebulizers. Its features an enhanced parallel path design.

  • PEEK Mira Mist Nebulizer 0.2-2.5 mL/min Uptake Rate for Avio 200/500 and Optima…

    PerkinElmer

    The PEEK Mira Mist ® nebulizer produces excellent mist and can handle high level of particulates in sample. Fits regular spray chambers as a direct replacement for glass concentric nebulizers. Its features include standard pressure (45 psi), low sample flow and enhanced parallel path design.

  • Rigid Capillary Tubing

    Agilent Technologies

    Squarely cut, pre-cleaned and ready to use Use with stainless steel fittings and ferrules or PEEK fittings This product is only available to U.S. Domestic Customers.

  • Peak Finger Tight Fitting 10-32 Thread

    PerkinElmer

    Peak Finger Tight Fitting 10-32 Thread, Package of 5

  • PEEKsil™ Injection Loop

    SGE

    …loss due to shear or adsorption Maximum operating pressures are 3000psi for 10µL, and 20µL loops Supplied with PEEKsil™ tubing and two sets of Stainless Steel Hexnuts™ with PEEK ferrule fittings Compatible with most valves including Rheodyne® and Valco®

Compare Tool

Select up to 3 products

Please Log In

Don't have an Account? Create one now.