Chemglass Funnels
-
-
This unique separatory funnel is manufactured with a removable PTFE stem that virtually eliminates breakage normally associated with standard glass stem stopcocks. Made entirely of PTFE, the stem attaches directly to the glass stopcockwithout o-rings or other gaskets. Glassware equipped with…
-
Unique design of this addition funnel permits solutions to be prepared using a magnetic Stir Bar. Side arm has a 2mm high vacuum glass T-Bore stopcock having a S.S. constant pressure retension device for evacuation and purging of both the funnel and lower vessel. Lower valve is a 0-4mm…
-
Squibb shaped separatory blank complete with tooled and finished ground stopper neck top. Lower portion of blank is unfinished and requires a stopcock to be sealed. NOTE: SUPPLIED WITHOUT STOPPER.
-
Squibb style separatory funnel with a glass stopcock. Supplied complete with a flask length stopper of the listed size. For replacement stoppers see CG-3018.
-
Filter Funnels, Hirsh
ChemglassUsed in applications where it is necessary to wash and re-dissolve the precipitate with chemicals that would attack standard filter paper. The 60º angle on the funnel permits removal of precipitates.
-
Buchner style filter funnel having a lower standard taper inner joint and serrated tubulation for connection to a vacuum source. Disc diameters and height above the disc are the same as CG-1402. Improved design incorporates a delivery stem being sealed within the inner joint to prevent breakage.…
-
Filter Funnels, Jacketed
ChemglassSimilar to CG-1402 but with a water jacket enclosing the funnel bowl and upper portion of the stem. Jacket permits heating or cooling of the contents of the funnel during filtration. Stem length listed is the length below the jacket.
-
This unique disposable filter funnel system for solid-liquid separation can be used in chemistry and biological laboratories. The system consists of a polypropylene filter funnel with silica gel/polyethylene fritted disc, a CG-1049-J style glass vacuum adapter, and a flask or vial. The…
-
Funnels, Powder, Modified
ChemglassSimilar to CG-1720, but with one side flattened to allow funnel to be used in multi-neck flasks where space is limited. Flat side dimension is the distance between the center of the standard taper inner joint and the flattened side of the funnel. Funnels have 60º angled sides with a standard…
-
Eco Funnels, 8 Inch
ChemglassThe 8" Eco Funnel is make of HDPE and has a 2000mL fluid capacity. Features an easy to use lid, gasket and positive latch to close the lid and maintain an airtight seal. A filter is also built into the interior to reduce the loss of magnetic stir bars and other items when emptying the contents…
-
Similar to AF-0542 but with the top having a standard taper inner joint instead of the outer joint. Available with a choice of a 2mm high vacuum glass stopcock having a S.S. constant pressure retaining device or a 0-4mm Chem-Cap® Airfree® inlet valve.
-
This unique disposable filter funnel system for solid-liquid separation can be used in chemistry and biological laboratories. The system consists of a polypropylene filter funnel with diatomaceous earth/polyethylene fritted disc, a CG-1049-J style glass vacuum adapter, and a flask or vial. The…
-
Squibb style separatory funnel with a PTFE stopcock. Supplied complete with a flask length stopper of the listed size. For replacement stoppers see CG-3018.
-
Filter Funnels, Pressure
ChemglassFor positive pressure filtration of materials up to 15 psi. Connection between the funnel and adapter is made by an o-ring joint which permits a larger, grease free opening for sample retrieval. The 24/40 lower inner standard taper joint has an outlet for connection to a vacuum source. Complete…
-
Buchner Filter Funnels
ChemglassFunnel has a sealed-in glass fritted disc of the listed porosity. Useful wherever filter paper or membranes cannot withstand the chemical attack of the filtrate. Constructed with heavy wall stems and the top of the funnel is beaded for additional strength. Not recommended for use where pressure…
-
-
Similar to CG-1728, but graduated with a double scale of numbers, one up from the stopcock and one down from the capacity line. Supplied complete with listed size stopper. For replacement stoppers see CG-3018. Dimensions are the same as CG-1726.
-
Support Assemblies, 47mm, Fritted
ChemglassGlassware system for vacuum filtration using 47mm membranes. Assembly is designed for use with vacuum manifolds or optional plastic coated filtering flask. Support base has a sealed-in coarse porosity fritted disc. Complete assembly includes a 300mL graduated funnel, aluminum clamp, support base…
-
Large capacity globe shaped separatory funnel with a choice of glass or PTFE stopcock. Stem length is approx. 130mm below the stopcock on all sizes. For replacement stoppers see CG-3018 for #38, CG-3000 for 45/50.
-
-
Fritted filter funnel has a choice of coarse or medium porosity fritted disc. Lower outlet is a standard taper inner joint and has a CG-961-01 0-4mm Chem-Vac™ Chem-Cap® valve. Top outer joint is the same size as the lower inner joint. Capacity listed is that above the fritted disc.…
-
-
Buchner Filter Funnels, Extra Capacity
ChemglassSimilar to CG-1402, but with the height above the disc increased by 33% for greater capacity. Not recommended for use where pressure would exceed 15 PSI.
-
Squibb style separatory funnel with a PTFE stopcock. Supplied complete with a flask length PTFE stopper. See CG-3020-A for replacement stoppers.
-
Disposable Cone Shaped Filter Funnels
ChemglassDisposable filter funnel for solid-liquid separation can be used in chemistry and biological laboratories. The molded funnel has a 10 micron polyethylene fritted disc. Polypropylene filter funnel is designed for use with the CG-1049-J style glass vacuum adapter and a flask or vial. The CG-1049-J…
-
Similar to CG-1742, but with the plain lower stem replaced by an inner standard taper joint of the listed size having a sealed in drip tip. Supplied complete with one listed size flask length stopper.
-
Duran® heavy wall filtering flask has a unique removable PPN hose connection. Hose connection is secured to the flask via a silicone rubber seal. Bottle shape filter flask, PLASTIC COATED, with removable PPN hose connection. For replacement PPN hose connection sets see CG-1563.
-
Funnels, Vials, PTFE
ChemglassFunnel machined from PTFE screws securely onto any standard laboratory vial having a GPI thread. Design allows for easy, safe and mess free transfer of product. PLEASE NOTE: VIALS ARE NOT INCLUDED WITH FUNNELS.
-
Funnels, Powder, PTFE
ChemglassPTFE powder funnel is totally chemically inert with super smooth non-stick internal finish.
-
Funnels, Process Reactors
ChemglassFeatures: Large Opening Polypropylene 60 and 80mm Reaction Flange for Easy Connection Fits 10 thru 100L Reactor Systems Large funnels have a 60mm or 80mm flange fused to the bottom of the funnel. This design makes them ideal for filling our process reactors by clamping the…
-
Filter Apparatus
ChemglassUseful for direct filtration applications of small volumes under vacuum. Complete apparatus consists of a Buchner funnel with 14/20 top outer and lower inner joints, and a 50mL Erlenmeyer flask having a 14/20 outer joint.