Funnels

Compare Tool

Select up to 3 products

1 - 31 of 31
Sort
View
Show
  • Inside flutings for rapid filtration For use in flasks or test tubes without filter rack

  • These PYREX® Hirsch funnels have a 20mm or 30mm diameter and medium or coarse porosity fritted disc. These fritted disc funnels are very useful in preparative work, or in making separations where it is necessary to wash the precipitate and redissolve with chemicals which would attack filter paper.…

  • Glass stopcock and glass stopper Stem length of 65 mm

  • Inside flutings for rapid filtration 60° angle permits accurate fitting of filter paper. Long 150 mm stem. Strong beaded edge. Depressed inside flutings further decrease filtering time.

  • Durable polypropylene funnels are translucent and allow safe and easy transfers of solids or liquids from one vessel to another.

  • Teflon® stopcock plug fits into the micro-finish barrel Plug reduces freezing problems and grease contamination

  • Replaceable tip, Teflon® stopcock and high-density polyethylene stopper Designed for long life and maximum safety Economical - reduces costs by providing replacement components Stopcock assembly features a simple screw thread locking nut and collar which ensure that the stopcock…

  • (This is the suggested replacement for 6340-4L) These 4L PYREX® pear-shaped separatory funnels have glass No. 8 Standard Taper stopcocks and strong, hollow No. 38 Standard Taper glass stoppers. For replacement glass Standard Taper stoppers, see No. 7650; for stopcock plugs, see No. 7680; for…

  • Funnel 6000 ml

    Corning

    These 6L PYREX® pear-shaped glass separatory funnels have Polytetrafluorethylene (PTFE) No. 10 Product Standard stopcocks and strong, hollow No. 38 Standard Taper glass stoppers. The PTFE plug fits into the micro-finish barrel The plug also reduces freezing problems and grease…

  • Beaded rim and short, large bore stem Funnel i.d. and stem o.d. listed respectively

  • Teflon® stopcock plug and Standard Taper polyethylene stopper Stem length of 65 mm PYREX® borosilicate glass body

  • These 125mL PYREX® cylindrical separatory funnels are graduated to show approximate capacity, The PTFE plug fits into the micro-finish barrel. The plug also reduces freezing problems and grease contamination.

  • These 500mL PYREX® cylindrical separatory funnels are graduated to show approximate capacity, have a micro-finish No. 4 Product Standard Polytetrafluorethylene (PTFE) stopcock and a strong, lightweight No. 27 Standard Taper glass stopper. The PTFE plug fits into the micro-finish barrel …

  • PTFE valve These improved PYREX® Squibb type separatory funnels provide an unbreakable PTFE valve and drip tip and have a screw thread closure at the top. Supplied complete with PTFE valve assembly and a screw cap with PTFE-faced silicone liner. Valve sizes range from 2 to 8 mm.…

  • Funnel 125 ml

    Corning

    These 125mL PYREX® glass separatory funnels have Rotaflo® stopcocks and strong, hollow No. 22 Standard Taper glass stoppers. A glass stopper is also included for your convenience. Stem O.D. is 10mm. For replacement glass stoppers, see No. 7650 and for polyethylene stoppers, see No. 7624.

  • These PYREX® globe-shaped separatory funnels are made from specially molded blanks which are tapered toward the stopcock to facilitate the separation of liquids. Their sturdy design makes them excellent for rack work. For replacement glass Standard Taper stoppers, see No. 7650; for stopcock plugs,…

  • Funnel 125 ml

    Corning

    These 125mL PYREX® glass separatory funnels have Polytetrafluorethylene (PTFE) No. 2 Product Standard stopcocks and inner and outer 19/22 Standard Taper joints. The PTFE plug fits into the micro-finish barrel. The plug also reduces freezing problems and grease contamination. For replacement…

  • Utilizes PVC-coated borosilicate glass, which helps contain glass and contents should breakage occur Chemically and thermally resistant Excellent optical clarity Mechanically durable Autoclavable or microwaveable at 121°C (250°F)

  • These fritted disc funnels are very useful in preparative work, or in making separations where it is necessary to wash the precipitate and redissolve with chemicals, which would attack filter paper. The angle of the funnel body facilitates the removal of precipitates. These funnels are available…

  • These PYREX® glass separatory funnels have Rotaflo® stopcocks and strong, hollow Standard Taper glass stoppers. A glass stopper is also included for your convenience. Stem O.D. is 10mm. For replacement glass stoppers, see No. 7650 and for polyethylene stoppers, see No. 7624.

  • 4565F10 will fit tubes up to 20 mm o.d. (without lip); outer mantle i.d. is 25 mm and inner tube o.d. is 8 mm; overall height: 70 mm 4565F25 can be used on bottles with maximum rim diameter of 44 mm; outer mantle i.d. is 45 mm and inner tube o.d. is 10 mm; overall height:   85 mm

  • These 4L PYREX® pear-shaped glass separatory funnels have Polytetrafluorethylene (PTFE) No. 8 Product Standard stopcocks and strong, hollow No. 38 Standard Taper glass stoppers. The PTFE plug fits into the micro-finish barrel. The plug also reduces freezing problems and grease contamination. For…

  • For use without filter paper Offered in nine sizes and three porosities Pore sizes 40 to 60 µm = C, 10 to 15 µm = M and 4 to 6 µm = F With square-cut, fire-polished rim These funnels are especially useful where filter paper would be attacked by the material…

  • For aseptic filling of vessels Rubber tubing is attached to the top of the tubulation while the receiving vessel is placed inside the bell.

  • Funnel 6000 ml

    Corning

    These 6L PYREX® pear-shaped separatory funnels have glass No. 10 Standard Taper stopcocks and strong, hollow No. 38 Standard Taper glass stoppers. For replacement glass Standard Taper stoppers, see No. 7650; for stopcock plugs, see No. 7680; for retaining clips, see No. 7280.

  • These replacement 60mL PYREX® Squibb separatory funnels do not have a Polytetrafluorethylene (PTFE) valve assembly or glass stopper.

  • Long and short stem funnels are ideal for filtering Molded to an accurate 60° angle for ease in fitting filter paper Beaded rim for mechanical strength Long stem, which is constructed of heavy wall tubing Molded to an exact 58° angle , which increases filtering speed High resistance to…

  • These replacement 125mL PYREX® glass separatory funnels have inner and outer 19/22 Standard Taper joints. They require Polytetrafluorethylene (PTFE) No. 2 Product Standard stopcock plug fits into the micro-finish barrel. The plug also reduces freezing problems and grease contamination. For…

  • Molded construction with bottom ground flat; for use in the sugar industries

  • Funnel 30 ml

    Corning

    These 30mL PYREX® pear-shaped separatory funnels have glass No. 2 Standard Taper stopcocks and strong, hollow No. 9 Standard Taper glass stoppers. For replacement glass Standard Taper stoppers, see No. 7650; for stopcock plugs, see No. 7680; for retaining clips, see No. 7280.

Compare Tool

Select up to 3 products

Please Log In

Don't have a web profile? Create one now.