Lab Separatory Funnel
-
Glass Seperatory Funnel
United Scientific SuppliesSeparatory Funnel, conical Shape with PTFE Stopcock and Plastic Stopper.
-
Funnel Squibb Pear PTFE Stpk 1000ml
DWK Life Sciences (Kimble)KIMAX funnel is supplied with a closed-bottom linear, high-density polyethylene stopper to fit in the ground neck, and PTFE stopcock. Lower stems have an I.D. large enough that a column of liquid will "break" with the stopcock closed, thereby giving a more complete separation…
-
Glass Separatory Funnel Kits
Across InternationalIntroducing the new Ai separatory funnel kits with all PTFE valves. A separatory funnel, also known as separation funnel, separating funnel, or colloquially sep funnel, is a piece of laboratory glassware used in liquid-liquid extractions to separate (partition) the components of a mixture into two…
-
Teflon® stopcock plug fits into the micro-finish barrel Plug reduces freezing problems and grease contamination
-
Teflon® stopcock plug and Standard Taper polyethylene stopper Stem length of 65 mm PYREX® borosilicate glass body
-
KIMAX Squibb Separatory Funnels With Plastic Stopper
DWK Life Sciences (Kimble)With Teflon ® stopcock plug Standard Taper ground neck has solid plug stopper of high-density polyethylene Designed for Federal Specification NNN-F-800
-
European style funnel with new leak-tight, locking stopper that will not fall out during shaking or transportation. Outer ground joint at top is a Rodaviss joint. Stopper can be secured in top joint via cap and O-ring for a positive, leak-tight seal; n
-
Squibb-style dropping/separatory funnels with glass key stopcock used for precise, controlled dispensing of liquids Made of high quality borosilicate 3.3 glass with superior durability and heat tolerance Features a ground glass socket fitted with an interchangeable plastic stopper Designed…
-
Funnel 6000 ml
CorningThese 6L PYREX® pear-shaped separatory funnels have glass No. 10 Standard Taper stopcocks and strong, hollow No. 38 Standard Taper glass stoppers. For replacement glass Standard Taper stoppers, see No. 7650; for stopcock plugs, see No. 7680; for retaining clips, see No. 7280.
-
-
Nalgene™ FEP Separatory Funnels with Closure
Thermo Scientific NalgeneFunnel can be autoclaved; stopcock can be chemically sterilized. No stopcock lubrication needed. So transparent that phase interface is visible down to the stopcock and nonwetting surface—enhances complete drainage Break-resistant and impervious to any chemical used in a separatory…
-
Sibata Glass Separatory Funnel
Vee Gee ScientificSibata Glass Separatory Funnels Feature smooth tooled tips, white block letters and marking squares Supplied with PTFE stopcocks to eliminate freezing and lubricant contamination Made from high-quality borosilicate tubing with a low coefficient of expansion
-
Separatory Funnels, Squibb, Pear-Shaped, Standard Taper Stopper, with Totally…
DWK Life Sciences (Kimble)KimCote® plastic-coated funnel is supplied with a standard taper ground glass stopper and a totally autoclavable PTFE stopcock plug. Lower stems have an I.D. large enough so that a column of liquid will "break" with the stopcock closed, thereby giving a more complete separation and eliminating the…
-
-
These PYREX® globe-shaped separatory funnels are made from specially molded blanks which are tapered toward the stopcock to facilitate the separation of liquids. Their sturdy design makes them excellent for rack work. For replacement glass Standard Taper stoppers, see No. 7650; for stopcock plugs,…
-
Plastic Separatory Funnel Holder
United Scientific SuppliesThis non-corrosive separatory funnel holder, molded in PP, has a front opening which provides clear view of the solution and allows unobstructed placement of separating funnels. Two tapered wedges are provided to ensure firm grip on rods measuring 1/2" or 3/8" diameter.
-
KONTES® Non-Vortexing Separatory Funnels
DWK Life Sciences (Kimble)These separatory funnels prevent the vortexing of liquids during phase separation. The funnels are designed with an internal baffle plate to divert the liquids being separated from vortexing and then remixing The funnels are supplied with PTFE stopcocks and Standard Taper 29/42 center…
-
Squibb shaped separatory blank complete with tooled and finished ground stopper neck top. Lower portion of blank is unfinished and requires a stopcock to be sealed. NOTE: SUPPLIED WITHOUT STOPPER.
-
Holder Separatory Funnel 125-500ml
Glas-ColThe funnel holder will accommodate up to three funnels at once, depending on size, and can hold funnels as large as 500 ml. You can mount one or two of these holders on the shaker base. Just load the funnels with the stopcock down, adjust to the desired shaking position, and turn on the shaker. The…
-
Funnel Squibb Pear PTFE Stpk 2000ml
DWK Life Sciences (Kimble)KIMAX funnel is supplied with a closed-bottom linear, high-density polyethylene stopper to fit in the ground neck, and polytetrafluoroethylene stopcock. Lower stems have an I.D. large enough that a column of liquid will "break" with the stopcock closed, thereby giving a more complete…
-
Ungraduated Addition Funnels
DWK Life Sciences (Kimble)Cylindrical funnel has a PTFE stopcock and a glass hex head stopper 633031 is supplied without a stopper Standard Taper bottom joint is 24/40 with a drip tip Manufactured from 33 expansion, low extractable borosilicate glass conforming to USP Type I and ASTM E438, Type I, Class A requirements
-
Large capacity globe shaped separatory funnel with a choice of glass or PTFE stopcock. Stem length is approx. 130mm below the stopcock on all sizes. For replacement stoppers see CG-3018 for #38, CG-3000 for 45/50.
-
Squibb style separatory funnel with a PTFE stopcock. Supplied complete with a flask length stopper of the listed size. For replacement stoppers see CG-3018.
-
Plastic Separatory Funnels
Thermo Scientific NalgenePolyproylene funnels resist virtually all chemicals including hydrofluoric acid (5246T01 to T19) Teflon® TFE stopcock and housing Leakproof closure and stopcock Visible phase interface TFE housing eliminates need for lubrication which reduces the possibility of…
-
Funnel 6000 ml
CorningThese 6L PYREX® pear-shaped glass separatory funnels have Polytetrafluorethylene (PTFE) No. 10 Product Standard stopcocks and strong, hollow No. 38 Standard Taper glass stoppers. The PTFE plug fits into the micro-finish barrel The plug also reduces freezing problems and grease…
-
Funnel Separatory, Safety
Ace GlassThe safest separatory funnel available, our 7247 funnel features a plastic coating, a removable PTFE drip tip and pressure relief rodaviss threaded cap and stopper. Common accidents involving separatory funnels are breaking the glass drip leaving a jag
-
Utilizes PVC-coated borosilicate glass, which helps contain glass and contents should breakage occur Chemically and thermally resistant Excellent optical clarity Mechanically durable Autoclavable or microwaveable at 121°C (250°F)
-
Squibb style separatory funnel with a glass stopcock. Supplied complete with a flask length stopper of the listed size. For replacement stoppers see CG-3018.
-
Glass Separatory Funnels
GSC International, Inc.These Separatory Funnels are made from quality borosilicate glass, and come with a glass stopcock. They are commonly used in liquid-based extractions to separate the parts of the mixture into two solvent phases of different densities. PRODUCT WARNINGS WARNING: This product can expose…
-
SYNTHWARE Separatory Funnels with Standard Taper Joint
Kemtech AmericaSeparatory Funnel, Standard Taper Joint Capacity: 10-250mL Available Joints: 14/20, 19/22, and 24/40 available PTFE Stopcock Bore: 2mm Supplied with PTFE stopcock and PTFE or glass penny-head stopper
-
These replacement 60mL PYREX® Squibb separatory funnels do not have a Polytetrafluorethylene (PTFE) valve assembly or glass stopper.
-
SYNTHWARE Sure-Grip Separatory Funnels
Kemtech AmericaSeparatory Funnel, Sure Grip, Glass or PTFE Stopper, Synthware, Capacity: 500-2000mL available, Stopper Size: #27, PTFE Stopcock Bore: 4mm, Straight section between globe and stopcock provides a sure grip while shaking and also aids in clamping.