Glassware system for vacuum filtration using 47mm membranes. This assembly uses a standard taper 40/35 joint to connect the support base to the filtering flask, eliminating the possiblility of phthalate contamination from rubber stoppers. Recommended for filtering corrosive solutions, particulate…

These filter assemblies for FILTERWARE™ filtration system consist of an all-borosilicate glass funnel, fritted glass support base, aluminum clamp, and silicone stopper. Choose from 47mm or 90mm filter assembly sizes. Individual components are offered in various sizes for a customized unit.…

High-Density Polyethylene. Economically priced funnels with ribs which prevent air lock and speed filtration. The two smallest sizes are high-density polyethylene, the remainder are polypropylene. Funnel Set (1210B90) includes one each: 50mL (1210B85), 75mL (1210B86), 100mL (1210B87), and…

The CoorsTek Buchner funnel is used for separation and filtration of solids from liquids. The fixed perforated plate at the bottom contains small pores that allow the liquid to pass through while retaining the solid particles. It has glazed inside and out except for rim. Ceramic Buchner funnel…

Applications Aseptic filtration Pharmaceuticals and biologics Suspended Solids testing for municipal, surface, ground, and drinking water Rocker MF Series are optimized for microbiological testing Lid on KP 47U can be vented aseptically using disposable syringe filter (luer slip connection)

Filter support collars are ideal for supporting glass funnels, crucibles, Büchner funnels, and other filtration devices. The rubber collar forms a gas-tight seal during vacuum filtration. Rubber Tapered Filter Adapter Complete Set of 8 different sizes. Size 1-8 as listed as height, top inner…

Cylindrical style addition funnel with a PTFE adjustable bore metering plug. Turning the adjustment knob allows flow rate to be controlled from dropwise to full flow. For replacement stoppers see CG-3000.

Sartoclear Dynamics® Lab kits are designed for rapid harvesting 15 mL to 1,000 mL volumes of cell cultures in the lab, enabling clarification and sterile filtration to be performed in one step. These kits simplify the process by fully eliminating the centrifugation step otherwise needed for…

Flast flowing with Fritware® Porous Plates HDPE with sealed-in, polyethylene filter plate of coarse porosity (90-130 microns) Offer good retention and fast flow under vacuum Can be used with or without filter paper Use below 52°C (125°F)

Polysulfone filter funnels For 47 mm diameter membrane filters Eliminates the need for a manifold and/or breakable glass vacuum flask Particularly useful for field work Receiver is graduated Non-sterile Autoclavable Two side-arms allow connection to vacuum line; also…

Duran® heavy wall filtering flask has a unique removable PPN hose connection. Hose connection is secured to the flask via a silicone rubber seal. Bottle shape filter flask, PLASTIC COATED, with removable PPN hose connection. For replacement PPN hose connection sets see CG-1563.

Buchner Funnel, Fritted Disc, Inner Joint Capacity: Avilable in multiple capacities ranging from 15-600mL Joint: Multiple Joint sizes available Frit OD: ranging form 20-90mm Porosity: Medium and Course available Not recommended for filtration where pressure will exceed 15 psi

Double scale graduated funnel with jacket for cooling with dry ice. Calibrated from stopcock. With 1:5 PTFE stopcock plug; for extra plugs, see 8224. For stoppers, order 8250-12.

Unique gravity-sealing design Two-piece construction One-handed operation Large membrane access points for forceps Available in polysulfone or polypropylene No clamps or locking devices to manipulate. Less expensive than stainless steel, glass or magnetic funnels, yet compare favorably with…

The 90 mm filtration apparatus with replaceable fritted glass support is recommended for large volume filtration analysis of corrosive liquids or samples with high particulate loads. The glass support disc can be replaced if it becomes clogged or if sample-to-sample contamination is a…

For use without filter paper Offered in nine sizes and three porosities Pore sizes 40 to 60 µm = C, 10 to 15 µm = M and 4 to 6 µm = F With square-cut, fire-polished rim These funnels are especially useful where filter paper would be attacked by the material…

The GVS Analytical Funnels & Monitors meet the standard method requirements for a disposable device. Each sterile analytical funnel and monitors include a removable NC membrane.  Analytical funnels are ready-to-use 100 ml filtration units with membrane and culturing devices. After…

Cylindrical funnels have a pressure equalizing line, a PTFE stopcock, and a lower drip tip Graduations to the stopcock are numbered both up and down Manufactured from 33 expansion, low extractable borosilicate glass conforming to USP Type I and ASTM E438, Type I, Class A requirements

Microsart @filter 100 filter units are a sterile and ready-to-use combination of funnel, filter base and membrane in one unit. They have been specifically developed for the detection and enumeration of microorganisms in pharmaceuticals, cosmetics, food, beverages, water and other liquids. The…

Use these economical sterile disposable filter funnels to perform microbiological QC testing and analysis of water, food/beverage, raw material and finished product. The squeeze and twist funnel is easy to remove for retrieval of the CN membrane. Economical, disposable and sterile …

This all-glass filter holder is used in particulate contamination analysis for filtering aqeuous, organic, or corrosive liquids. It is also recommended for HPLC solvent filtration. Complete set includes a borosilicate glass funnel, anodized aluminum spring clamp, vacuum base with sintered disc,…

Analytical funnels made of autoclavable polypropylene. These funnels have long, narrow bore that works best for liquids.

Designed for bacteriological analysis where it is necessary to sterilize the filter holder with the membrane filter in place. The glass surface is coated with PTFE to avoid filter damage and membrane adhesion during autoclaving. Complete set includes a PTFE-faced borosilicate glass funnel and…

Buchner filter funnel featuring a standard taper, drip-tip bottom joint and a vacuum source hose connection. Available in various sizes and porosities.,/p>

KIMAX funnel constructed with heavy uniform walls and strong, molded rims and fire polished stems to give a long service life Funnels have a high resistance to chemical attack and mechanical and thermal shock 58 º funnel angle is a Kimble exclusive, formed to an exact angle for rapid…

Designed for bacteriological analysis of water using 47mm sterile membrane filters. Also applicable for analysis of suspended solids in water using 47mm depth filters. Complete set includes a borosilicate glass funnel and base., anodized aluminum spring clamp, and perforated silicone stopper. …

This unique disposable filter funnel system for solid-liquid separation can be used in chemistry and biological laboratories. The system consists of a polypropylene filter funnel with diatomaceous earth/polyethylene fritted disc, a CG-1049-J style glass vacuum adapter, and a flask or vial. The…

Eichrom’s disposable funnel units come preloaded with our Resolve® filters for alpha spectrometry source preparation. Like the Resolve filters, the funnel units are designed to maximize analyte recovery and the resolution of the filter. These units are disposable, therefore eliminating the…

Useful in pouring powders or liquids into ground joint containers. Available with standard taper or spherical inner joint. Funnels without joints listed under 7242.

Designed to handle liquids for analysis of particulate or microbiological contamination; funnels are graduated for accuracy Choose the Ultra-Ware microfiltration assembly that best fits your application Fritted Glass Support, 25 mm (4588A01) Used for general filtration.…