Ace Glass Specialty Flasks
-
Head, Filter Reactor
Ace GlassReactor head, 60mm o-ring groove flange with (3) in-line 24/40 joints. Use with our 6384, 6386 and 6388 reactor bodies.
-
Reaction Flask Head
Ace GlassHeads with three necks (inline) that fit our 6504,6511&6516 reaction vessels that feature either a 137 x 100mmID or 168 x 130mmID flat flange. Use with our 6508 or 6510 clamps. For improved sealing of flat ground flanges, please see our 6495 product family of gaskets. Note: vessels with o-ring…
-
Flask, Reaction, Spherical, Jacketed
Ace GlassRugged spherical jacketed reaction flask with Duran, flat, ground flange with O-Ring groove, for use with 6517 Quick Release Clamp. Each flask is supplied with one CAPFE O-Ring (PTFE encapsulated silicone O-Ring). 12L and larger are supplied with reference graduations. Inlet/outlets available with…
-
Jacketed, spherical reaction flask with Duran flat flange and o-ring groove, for use with our 6517 Quick Release clamp. Bottom outlet features an Easy-Action plug controlling the 28/15 o-ring ball joint outlet. Jacket inlet/outlets are available with either tangentially sealed o-ring ball joints…
-
Reaction Assembly, Portable, 12 and 22L
Ace GlassComplete self-supporting pilot plant assembly. Needs only to be located near coolant and electrical outlet. When not in use, entire assembly can be intact, without breakdown. Features flask, self-standing mechanical or air motor, flat-sided powder funn
-
Flask, Tapered Wall
Ace GlassWalls tapered inward toward the bottom to allow continuous operation with smaller volumes. Flasks supplied with joint on center and two side necks. The four and five neck versions have one or two #7 Ace- Thred necks to accomodate thermometers and elect
-
Benchtop Reactor, All-in-one, Jacketed
Ace Glass1L or 2L jacketed general purpose bench top reactor system supplied complete with everything necessary for operation. The system is designed so that all wetted surfaces are glass and PTFE for maximum chemical compatibility. A small overall stand footprint and flexible drive shaft combination allow…
-
Scale-Up Series™ Cylindrical Flasks
Ace GlassScale-Up Series™ cylindrical flasks with an Easy Drain glass valve. The flask is graduated on both sides allowing for either left or right hand flask orientation. The Easy Drain valve is designed to prevent accidental removal when opening and inc
-
Round bottom, indented Morton Type, three neck flask. 500ml and 1L sizes have angled side necks while larger sizes feature vertical necks. Available in heavy wall. Indents enhance agitation during stirring.
-
Round bottom, borosilicate flask for NO-AIR and vacuum applications. Ideal for storage or reactions. 0-4mm Hi-Vac valve for precise control of flow. 15mm o-ring joint side arm for connecting to schlenk lines. 7855-726 Fetfe o-ring included.
-
Spherical Reaction Flask
Ace GlassRugged spherical flask with neck opening of 4" (10.2cm). Standard size flasks use regular Glas-Col heating mantles of equivalent capacity. Length of straight section including flange, approximately 9.5cm (33/4 "). Uses 6496 Clamp for securing flask hea
-
Flask Reaction, Hi-Vac Valve NO-AIR
Ace GlassRound bottom borosilicate glass flask with standard taper center neck and a 0-4 Hi-Vac valve for precise control. Flask is ideal for simple NO-AIR and vacuum applications. Outlet arm is 8MM and can be fitted with a rubber septa for insertion of samples or additives via syringe.
-
Flask Single Neck, Side Arm, No-Air
Ace GlassRound bottom flask with single neck with standard taper joint and a 8mm side outlet with either a 2mm glass stopcock or a 0-3 inlet valve. Ideal for Schlenk lines and either NO-AIR or vacuum applications. Includes one 9096-32 septa for side arm.
-
PTFE Reactor, Body Only
Ace GlassAll PTFE reactor body, component of our 6390 PTFE Filter Reactor product family.
-
Rugged spherical reaction flask with Duran style flat flange with O-Ring groove, for use with 6517 Quick Release Clamp. Various valve and bottom fitting configurations available, see individual listings. each flask includes a CAPFE (PTFE encapsulated silicone) O-Ring. Plain silicon O-Rings are also…
-
Head, Duran Flange
Ace GlassProduct family consisting of large spherical flasks and the heads that complement them. Flasks that feature a bottom outlet have descriptions that state the outlet's type, otherwise the flask has no outlet.
-
Flask, Jacketed, with Polished Joint
Ace GlassJacketed version of standard 9448 Flask. Furnished with polished 45/50 outer joint so that it can be used with 9443-20 or 9446 Heads with PTFE-Clad joint which does not require lubricant and does not freeze under high temperature, vacuum operation.
-
Distilling round-bottom flask coated with Ace Instatherm. Designed to operate up to 360 & deg; C, heating response time is very rapid, (5° per minute), with very low thermal lag. Has vertical standard taper reinforced outer center neck and angled standard taper reinforced outer side neck.…
-
Flask
Ace GlassRound bottom, cylindrical sides. Useful in many Mini-Lab Assemblies. Can also be applied to many other applications in the laboratory where a wide-mouthed flask of small capacity is desired. Available with 45/50 joint polished.
-
Head, Duran Flange
Ace GlassFlat ground flange for use with all Reaction Flasks that have a 150mm (6") Duran ground mating flange. Supplied with three in line ground joints and one or two 90 degree joints. For thermometer or probe adapter, see our 5028 series. For clamp, see 6517.
-
Reaction Flask, Removable Stopcock
Ace GlassWith 4mm bore stopcock for rapid removal of contents without disturbing the general arrangement of the apparatus. Stopcock is separated from lower section by 28/15 joint. Neck opening is standard 10.2cm (4"). For joint clamp, order 7669-12. Use 6496 Cl
-
Flask, Pressure, Round Bottom
Ace GlassRound bottom, heavy wall, pressure rated flask. All flasks come complete with a solid PTFE plug seal with front seal FETFE o-ring for better containment of product. Vessels are tested at 1.5x for a working pressure rating at 60PSI at 120°C. Flasks
-
Flask, Two Necks, Pear-Shaped
Ace GlassPear-shaped, with side arm for use with 9095 rubber thermometer adapter. Joint is 14/20.
-
Reaction Flask, Spherical, Jacketed
Ace GlassSpherical, jacketed reaction flask with 100mm (4") flat flange top. Jacket inlet/outlets available with either tangentially sealed 28/15 o-ring ball joints or with Ace-Thred connections. Use 6496-10 clamp to secure head to flask.
-
Round bottom flask with a 0-4mm Hi-Vac valve top with a 9mm side port designed to accept 3/8in Cajon fittings. The valved top gives the researcher precise flow control.
-
Arsine Generator, Guthzelt
Ace GlassDesigned for arsenic analysis by the diethyldithiocarbramate colorimetric method. Meets APHA Standard 104A, ACS/USP, and EPA specifications. All wetted surfaces are borosilicate glass or PTFE clad joints. Code -40 complete unit consists of one 24/40, 125ml erlenmeyer flask, one 24/40 to 12/2…
-
Similar to 9843-04 Vessel except jacketed to provide active cooling from tap water or mechanical cooler. Jacket is cylindrical with flat bottom for greater stability. With #25 Ace-Thred center neck and two 14/20 side necks. Code -27 includes our 7506-10 #25 Ace-Thred bushing used to secure a…
-
Fully jacketed, european style flasks with tapered walls and shallow bottoms for more efficient half-moon shaped paddle stirring. Jacket has hose connection inlet/outlet. Available in three necks or 5 neck version featuring two #7 Ace-Thred joints with
-
Scale-Up Series™ jacketed cylindrical flasks with Easy Drain glass valves and KF flange inlet & outlets. The flask is graduated on both sides allowing for either left or right hand flask orientation. The Easy Drain valve is designed to prevent accidental removal when opening and incorporates…
-
Borosilicate glass, round bottom reaction vessel. Supplied with 24/40 center neck and two 24/40 side necks. Fourth neck is #25 Ace-Thred on 500 mL for use with 7506-10 Bushing and O-Ring; #36 Ace-Thred on 1000 mL and 2000 mL sizes for use with 7506-12 Bushing and O-Ring to make a leak-tight…
-
Flask, European Style
Ace GlassEuropean style, tapered walls with shallow bottom for more efficient magnetic or mechanical half-moon shaped paddle stirring. Supplied with center neck, two side necks. Available with 1 additional #7 Ace-Thred or 2 additional #7 Ace-Threds complete wit
-
Kriel Reactor, Photochemical
Ace GlassReactor is most useful in prep-scale photolysis and features tapered sides which assures full submersion using our 7825-34 or 7825-36 lamps within the supplied quartz immersion well. A 20% savings in reaction time over round bottom flasks. Additionally