Accessories

Compare Tool

Select up to 3 products

1 - 32 of 164
Sort
View
Show

Ahlstrom

  • Filter Holders

    Sartorius

    Accessories for Combisart and Microsart Combi.jet Vacuum Manifolds

  • Vented In-Line Filter Holder, Stainless Steel

    Advantec MFS

    47mm filter diameter Available in type 304ss or 316ss Filter liquids or gases at point-of-use This 47mm in-line holder (model KS47) is available in both type 304 or 316 stainless steel. The PTFE coated support screen prevents sticking of the membrane during autoclaving. The…

  • Stainless Steel Gas In-Line Filter Holders

    Advantec MFS

    Threaded locking ring enables filter changes without disconnecting the gas lines. Dual support screens protect the membrane filter from reverse pressure surges and allow forward and reverse flow. Tighten by hand only - hand torque maximum is 15 lbs/in. Type 304ss body and support screen.…

  • Neoprene Filter Adapters

    Chemglass

    Neoprene filter adapters are designed to fit between a filtering funnel and a flask. For use with Buchner funnels, Gooch crucibles, filter tubes, etc. Can be used individually or nested with adjacent sizes. Eliminates the boring of rubber stoppers and the difficulties of inserting and removing…

  • CUT OFF FILTER 515NM

    PerkinElmer

    CUT OFF FILTER 515NM

  • Ashless Filter Aids

    GE Healthcare

    Ashless clippings Ashless clippings Whatman ashless filter aids enhance filtration speed by coagulating precipitates or suspensions to form a thick retentive “prefilter” layer on top of normal filter paper. Easily dispersible, the powder is of a purity similar to that of Whatman ashless…

  • Filter Stopper RBR #8 0.625" Hole

    Thermo Scientific Nalgene

    No. 8, rubber For use with 145- and 147-series analytical test filter funnels and filter funnel with clamp

  • 47 mm Screen, Filter Support, S / S

    DWK Life Sciences (Wheaton)

    Designed to handle up to 1000mL of liquid for analysis of particulate or microbiological contamination Glass components manufactured from WHEATON 33 low extractable borosilicate glass that conforms to USP Type I and ASTM E 438 Type I, Class A requirements Flasks have a #2 hose connection for…

  • Sanitary In-Line Filter Holders, Stainless Steel

    Advantec MFS

    Sanitary inlet and outlet connections are non-threaded Point-of-use filtration Advantec Sanitary In-Line Holders feature non-threaded inlet and outlet connections that can be completely disassembled for thorough cleaning. Dual sealing system compresses filter to ensure no lateral…

  • Oxygen Trap

    PerkinElmer

    High efficiency oxygen trap has a capacity of 2.5 liters at room temperature. It is also effective for removing sulphur compounds such as hydrogen sulfide and mercaptans. This oxygen trap is for use with nonoxidizing gases such as; He, Ar, N2, and CH4. Oxygen removal to below 70 ppb using normal GC…

  • RO Accessories and Consumables

    Barnstead

  • Thomas Tapered Collar Neoprene Filter Adapters Tubes, Etc.

    Thomas®

    For supporting funnels, Gooch crucibles, filter tubes, etc., in filtration assemblies Particularly suitable for Buchner and fritted glass funnels, porcelain filters without head pieces and for reverse flow cleaning of filter crucibles Adapters will withstand autoclaving Taper angle in all…

  • Stainless Steel Syringe Filter Holders

    Advantec MFS

    re-usable thereby eliminating waste using disposable units use a variety of membranes that may not be availabe in disposable units These 13mm and 25mm type 304 stainless steel syringe holders are economical and re-usable thereby reducing waste. Luer-lock fittings are compatible with…

  • Pressure Filter Holders with Reservoir, Stainless Steel

    Advantec MFS

    Reservoir elliminates the need for a pressure vessel Filter small batches of liquid Available in type 304ss or 316ss These quality stainless steel holders are designed for filtering small batches of liquid without having to use a separate pressure vessel. There are separate ports for…

  • Multi-Media Pressure Filter Holders, Stainless Steel

    Advantec MFS

    Use a broad range of media thickness, including pads Multiple layers of media can be used without lateral wicking Unlike standard holders, the Multi-Media Pressure Sealing Filter Holder has a dual sealing system which allows the use of a broad range of media thickness, including pads.…

  • Cell Strainers

    Biologix

    Made of sturdy polypropylene and strong nylon mesh Three different pore sizes available: 40μm, 70μm, or 100μm, strainers are color-coded according to pore size for convenience Fits perfectly into Biologix 50mL Centrifuge Tubes Gamma radiation sterilized, non-pyrogenic

  • Indicating Oxygen Trap

    PerkinElmer

    Indicating oxygen trap with a capacity of 40 cc of pure oxygen and 100 psig maximum pressure, to be used downstream of a high capacity oxygen trap.

  • SX0001300

    MilliporeSigma

    Millipore Swinnex™ Filter Holder, 13 mm. Use to ultraclean or sterilize small volumes of liquids dispensed by syringe Made of polypropylene with silicone gasket These filter holders accept 13mm membrane filters of your choice Autoclavable with filter in place for sterile…

  • Solenoid In-Line Filter

    PerkinElmer

    Replacement 10 micron filter for P/N 09903665.

  • Oxygen/Moisture Combination Stainless Steel Trap

    PerkinElmer

    Spring loaded check valves seal when a filter is removed and open only when a new filter has been locked in place. There is no need for loosening and tightening fittings every time a trap is changed and your system will not become contaminated during the process.

  • Balston Air Filter Assembly Type A82

    PerkinElmer

    Provides clean air for AA spectrometers without microcomputer gas controls.

  • Holmium Oxide Glass Filter

    PerkinElmer

    Holmium oxide glass filter for checking the wavelength accuracy of a UV/Vis or UV/Vis/NIR spectrometer. The filter is mounted in precision aluminium spring mount and is provided in a robust aluminium container with a Certificate of Calibration.

  • Large Stainless Steel Pressure Filter Holders

    Advantec MFS

    90mm, 142mm, and 293mm filter diameters Available in type 304ss or 316ss Large Stainless Steel Pressure Filter Holders are offered in various sizes for batch type laboratory filtration or continuous filtration operations using disc media. Advantec holders have been designed to minimizes…

  • Hg Replacement Filter

    PerkinElmer

    Hg Replacement Filter

  • High-pressure filter

    PerkinElmer

    High-pressure filter

  • Ultra Clean Base Plate Fittings Connector Set for GC/MS- 1/4 Stainless Steel

    PerkinElmer

    Cartridge systems make changing gas filters quick and easy. A base plate allows cartridges to be exchanged without introducing oxygen. Spring-loaded check valves seal when a filter is removed and open only when a new filter has been locked in place. There is no longer a need for loosening and…

  • Triple Gas Specific (He): Oxygen/Moisture/Hydrocarbons Stainless Steel Trap with…

    PerkinElmer

    Click-On Inline Super-Clean Traps are inline traps designed with Click-On adaptor connectors which allows inline cartridges to be exchanged without introducing oxygen. Spring loaded check valves seal when a filter is removed and open only when a new filter has been locked in place. There is no need…

  • Filter Dryer Kit

    PerkinElmer

    Removes moisture and particulates from your purge gas Includes all the necessary fittings needed to make pneumatic connections easy Tape and tubing are not included

  • XX6700P01

    MilliporeSigma

    Dispensing pressure vessel, 1 gallon Dispensing pressure vessels hold liquid for filtration through Millipore pressure-operated filter holders when connected to an external pressure source. Type 316 stainless-steel body and fittings; Viton gaskets and O-rings; molded neoprene rubber…

  • In-Line Filter Trap

    PerkinElmer

    Gas contacts only glass, metal and the adsorbents for purity. The Drierite ® indicator and molecular sieve 5A are packed in glass protected by an outer plastic tube in the event that the glass breaks. Unique loading design allows operation in any orientation without channeling. Designed for GC…

  • Polypropylene In-Line Filter Holder

    Advantec MFS

    Thermoplastic polymer Polypropylene (PP) lends to this units durability and compatibility with a wide range of chemical solvents and temperatures. Exterior locking ring design allows unit to be assembled quickly and efficiently without tearing the membrane or removing from lines. Body and…

  • Kit Of O-Rings For Reusable Filter Holders: For #300- And #310 Series

    Thermo Scientific Nalgene

    Kit of O-Rings for 300- and 310- Series reusable filter holders

Compare Tool

Select up to 3 products

Please Log In

Don't have an Account? Create one now.