Non-calibrated tubes made from borosilicate glass for use with aqueous and organic solutions. Packed in half pound packages. Tubes are 1.0-1.1mm OD x .66-.70mm ID.

With fritted disc sealed on bottom. Overall length 125mm. All porosities of a given size are priced the same.,/p>

mdi’s Centrifugal Filters are meant for high value laboratory applications like sterilization, purification, particulate removal and clarification of up to 500 µL of high value, difficult to get, biological/chemical samples. These filters offer a number of key features: Absolute…

This Amicon Ultra 0.5 mL centrifugal filter enables the concentration of proteins with a membrane NMWL of 10 kDa. Amicon Ultra centrifugal filters are ideal for protein purification, protein concentration & desalting. The vertical design and available membrane surface area provide fast…

Simply and efficiently concentrate and desalt solutions of any macromolecule, using any centrifuge that can accept 1.5 mL tubes. With the low-binding Ultracel® membrane, Microcon® filters offer: Typical recoveries of >95%, even for dilute solutions Reverse spin to maximize…

Supplied with 6, 7 or 8mm O.D. stem tubing, 150mm in length. Maximum O.D. of stem and filter disc is 20mm. Filter disc is 10mm diameter, porosity B (70-100 m).

27mm tubes (Thomas No. 0319Y64) These 27mm inner diameter PYREX® filter tubes have an 8mm. O.D. by 75mm long constricted lower end. They can be used on the bottom end of 30mm O.D. PYREX® Gooch Low Form fritted disc crucibles to collect the filtrate. Also for use with porcelain plates. …

Outside diameter of tube 8mm, total length of tube 150mm. All porosities of a given size are priced the same.

Similar to AF-0544, but with the addition of two side arms, 2mm high vacuum glass stopcocks having a S.S. constant pressure retaining devices.

For fine dispersion. Porous tip approximately 5mm or 7mm O.D. x 10mm. 7mm O.D. Tube fits #7 Ace-Thred. Offered with Porosity A (145-174 micron), Porosity B (70-100 micron), Porosity C (25-50 micron), Porosity D (10-20 micron), or Porosity E (4-8 micron

Applications: Analytical Sample Prep, HPLC; Qualitative Analysis; Filtration of Aqueous Solutions

The LabForce™ Premium Cell Strainer system is a fast and easy-to-use solution for detaching, isolating and straining cells from clusters and tissues. A polypropylene frame supports a nylon mesh that is available in three color-coded porosities: 40μm (blue), 70μm (white), and 100μm…

This Amicon Ultra 0.5 mL centrifugal filter enables the concentration of proteins with a membrane NMWL of 3 kDa. Amicon Ultra centrifugal filters are ideal for protein purification, protein concentration & desalting. The vertical design and available membrane surface area provide fast…

Digi FILTER  for filtering wastewater, soil and dirty samples prior to AA or ICP analysis. Dual-headed cap made from virgin polypropylene, Digi FILTER s offer low leachable metal content. A 0.45 micron Teflon membrane inserted in everyDigi FILTER  guarantees 98% particle retention.

STERIFLIP® FILTERS Compatible with 50 mL centrifuge tubes, Steriflip® filters eliminate the liquid transfer step by integrating directly into the sample tube. To filter, attach the unit to the 50 mL centrifuge tube containing your sample, flip, and apply vacuum. The filtrate…

Outside diameter of tube 8mm, total length of tube 150mm. All porosities of a given size are priced the same.

For construction of special apparatus. All porosities of a given size are priced the same.

This Amicon Ultra 0.5 mL centrifugal filter enables the concentration of proteins with a membrane NMWL of 50 kDa. Amicon Ultra centrifugal filters are ideal for protein purification, protein concentration & desalting. The vertical design and available membrane surface area provide fast…

Used in filtering glucose, agar and serums. All porosities of a given size are priced the same. Top accepts #3 or #4 rubber stopper.

Fritted disc is angled approximately 15 degree from stem, which permits the small gas bubbles to rise from the disc surface without excessive formation of large bubbles. These tubes give a performance compared to a horizontal disc, but the method of co

Filter tube with #15 Ace Threds on ends and an integral fritted disc. Disc diameter is 50mm and is available in different porosities. Supplied with #15 nylon bushings and 1/4" polypropylene hose barbs.

With porous fritted glass tip. Available in 150mm and 300mm lengths. O.D. of both lengths, 10mm. Fits through #11 Ace-Thred.

Synonym:  Shigemi nmr tubes, nmr sample tubes, nmr tubes General description Shigemi NMR microtubes offer high precision quality in NMR spectroscopy. The NMR microtubes are made out of a special type of hard glass wtih excellent chemical durability, and are magnetic…

These filters are supplied in a range of sizes from the 20mm disc size to the 50mm disc size. The smaller sizes are used to remove end products of a reaction during recirculation of liquid reactants, the larger units are suitable for filtering operatio

Outside diameter of tube 8mm, total length of tube 150mm.

For sulphur absorption chamber, after Edgar and Callingaert. Diameter of disc 30mm, height above disc 200mm, capacity 130mL. Will fit a No. 7 rubber stopper.

Diameter of disc 20mm. Height above disc 100mm. Capacity 30mL.

Gas dispersion tube with porous fritted tip for use with #7 Ace-Threds. Tube is bent 15 degree to allow positioning inside flask to avoid stirring paddles and yet reach close to bottom of flask. Specify porosity and length or code when ordering.

Tube allows for filtration followed by collection of crystals on opposite side of fritted disc. The standard taper inner joints at both ends are the same size. Available with a choice of coarse or medium porosity fritted discs.

This Amicon Ultra 0.5 mL centrifugal filter enables the concentration of proteins with a membrane NMWL of 10 kDa. Amicon Ultra centrifugal filters are ideal for protein purification, protein concentration & desalting. The vertical design and available membrane surface area provide fast…

,p>Diameter of disc 30mm, height above disc 100mm, diameter of bottom tube 8mm.

Disc diameter 10mm, length 150mm. Disc approximately 2mm thick. Outside diameter of tube 7mm.