Condensers, Nucleic Acid
-
Micro Soxhlet, Improved Design
Ace GlassDesigned for small chemical applications. Improved design permits greater condensing capacity. Condenser approximately 139mm jacket length. Joint between condenser and extractor is 24/25. Flask joint is 14/20. Designed to accommodate paper thimble, size 10 x 50 mm. Flask is 30mL capacity. Hose…
-
CONDENSERSS, AIR REFLUX, MINUM-WARE® CONDENSERSS, WATER-JACKETED, REFLUX, MINUM-WARE® ADAPTERS, CLAISEN HEAD, MINUM-WARE®, Supplied complete with open-top screw cap (MW-102-22) and PTFE faced silicone septa (MW-104-12). HICKMAN STILL HEADS, MINUM-WARE®
-
Condenser, Allihn
Ace GlassBulb type, approximately one bulb per 50 mm, with 24/40 standard taper inner joint at bottom.
-
Condenser, Double Coils
ChemglassHigh efficiency double coil condenser, similar to a rotary evaporator condenser but with 45/50 joints. Condenser has an O.D. of 80mm and is 400mm overall length. Coolant connections are made using removable hose connections with GL-14 threads. Supplied complete with two polypropylene hose…
-
Reaction Vessel Lids
ChemglassREACTION VESSEL LIDS, 4-NECKS, 50ML, EQUIVALENT TO METTLER EASYMAX, Reaction Vessel Lid, 4-Nk, 50mL, Compatible with Mettler Systems: (1) 14/20 SN, (1) GL-14 SN, (1) 10/18 SN and (1) 10/10 SN; Equivalent to Mettler Easymax® Part # 51161032Mettler Easymax® is a registered trademark of…
-
Column 190 mm 19/22
CorningThe PYREX® distilling condenser has 19/22 Standard Taper inner and outer joints, is simple in design and easy to use. Side tubulations are 10mm O.D. Distilling condensers are widely used in the lab, especially for fractionation. This condenser is also a replacement for organic chemistry kit No.…
-
SYNTHWARE Liebig Condensers
Kemtech AmericaLiebig Condenser Jacket Length: 100, 120, 180, 200, 250, 300, 400, and 500mm Joints: 14/20, 19/22 and 24/40 available Hose Connection: 8 or 10mm With outer joint at the top and inner joint at the bottom.
-
SYNTHWARE Reflux Condensers
Kemtech AmericaCoil style reflux condenser with tightly wrapped coil providing maximum cooling. Excellent for use with volatile solvents. Condenser has a top outer standard taper joint and lower inner drip tip joint. Hose connections have an O.D. of 8mm or 10mm at the middle serration.
-
SYNTHWARE Coil Reflux Condenser
Kemtech AmericaCoil Reflux Condensor, Microscale, Synthware, Joint: 14/10, for low boiling solvents, supplied with one compression cap, one Viton O-ring and one PTFE-faced silicone septum.
-
Hopkins Condensers for Central Collect
OrganomationHopkins condenser with tube fitting Dimensions: 50 x 260mm Joints: 24/40 Compatible With: Central collect S-EVAP KD units
-
Replacement condenser for Buchi rotary evaporators. Available plain or safety coated. Includes PTFE hose barbs,GL caps and plug.
-
Bulb type, approximately one bulb per 50 mm, with standard taper 24/40 inner and outer joint at bottom and top, #7 Ace-Thred and Ace-Safe PTFE hose connections on inlet and outlet with barb for 1/4" I.D. tubing. For replacement connectors, see 5853.
-
Liebig Condensers
ChemglassSmall scale Liebig condenser with a standard taper outer joint at the top and a lower inner drip tip joint. Hose connections have an O.D. of 10mm at the middle serration.
-
Condenser, Friedrichs
Ace GlassWith molded spiral condensing surface and standard taper 24/40 joint at bottom. Jacket length 250mm. Hose connections are size D.
-
SYNTHWARE Vacuum Jacketed Distillation Condensers
Kemtech AmericaDistillation Condenser, Vacuum Jacketed, Joints: 14/20 and 24/40 available, Jacket Height: 130mm and 250mm available, with 12mm ID indentations to support packing material **NOTE THESE PRODUCTS COME IN DIFFERENT SIZES - WHAT IS PICTURED MAY NOT BE THE ITEM SOLD**
-
PYREX Liebig Condensers
CorningWith Standard Taper 24/40 joints Inlet and outlet tubes, 10 mm o.d. are on opposite sides, indentations at lower end of condenser tube support packing when used as fractionating column.
-
Coil Condensers
ChemglassFor use in construction of spiral or Graham style CONDENSERSs. Coils can be sealed together to form longer lengths.
-
PYREX® Liebig Condensers
CorningSuitable for the use in vacuum distillations With Standard Taper drip tip joint at bottom and Standard Taper outer joint at top The 8” condenser has Standard Taper 19/38 joints; others have 24/40 joints
-
SYNTHWARE Liebig Condensers with Removable Hose Connections
Kemtech AmericaLiebig Condenser, Removable Hose Connections Jacket Length: 120, 180, 200, 250, 300, 400, and 500mm Joints: 14/20, 19/22, and 24/40 available Hose Connection OD: 8mm With outer joint at the top and inner joint at the bottom.
-
The improved design of ACE extractor condensers permits greater condensing capacity, cycling rates may be doubled over conventional style extractors. Complete consists of flask cap, condenser, extractor, and flask.
-
This Air Reflux Condenser is a replacement part for the 6949M series of PYREX® microchemistry kits.
-
West Condenser with Medium Length Joints
DWK Life Sciences (Kimble)Useful for refluxing and distillation assemblies. The narrow annular space of the West design provides high cooling efficiency due to the increased flow rate of the cooling medium Medium length Standard Taper joints Condensate is not restricted with this design Manufactured from…
-
Condensers, Dewar Type
ChemglassCondenser has a large opening at the top for use with dry ice/acetone or liquid nitrogen. Condenser has a lower inner drip tip joint and hose connections with an O.D. of 10mm at the middle serration. NOTE: See CG-4519 For Solvent Recovery Traps used with Rotary Evaporators.
-
-
SYNTHWARE Allihn Condensers
Kemtech AmericaAllihn Condenser Jacket Length: 120, 200, 300 or 400mm available Joints: 14/20, 19/22 or 29/42 available Hose Connection OD: 8 or 10mm With outer joint at the top and inner joint at the bottom.
-
Micro Cold Finger Condensers
ChemglassCondenser for use in refluxing from 1 to 20mL of solvent in flasks having a capacity of 5 to 50mL. Minimal surface area provides for better yields while providing adequate cooling. The additional hose connection is provided to allow introduction of an inert gas such as nitrogen. Top hose connection…
-
High Efficiency Condensers
ChemglassThis unique design combines some of the best features for refluxing in a single condenser. Coolant, introduced into the upper hose connection, fills a large cold finger that is wrapped with coils. After the coolant travels through the coils, it enters the water jacket to maximize cooling surface…
-
PYREX® Allihn Condensers
CorningAllihn - suitable for use in vacuum distillations With condensing tube expanded by series of bulbs which increase condensing area and lengthen condensate path Inlet and outlet tubes are on opposite sides of the jacket All sizes take stopper size 3 and have Standard Taper drip…
-
SYNTHWARE® Jacketed Condensers
Kemtech AmericaI.D. of inner tube is designed large enough to accept a thermometer. Supplied with one holed compression cap and one Viton® O-ring.
-
Graham Condensers with Ground Joints
GSC International, Inc.Our Graham condensers are made from high-quality borosilicate glass and have a sealed, coiled inner tube and two inlet/outlet arms. These condensers have 24/4 ground glass joints, but we also sell Graham condensers with standard joints . PRODUCT WARNINGS WARNING: This product can…
-
Concentrator Condensers
ChemglassVapors rise to the top of inner tube then travel downward and condense in this highly efficient concentrator. Condensate drains through the side tube which has a standard taper inner joint the same size as the lower inner uptake joint. Serrated hose connection for connecting to vacuum source. Hose…
-
Reflux Condensers, Double Cooling
ChemglassHigh efficiency reflux condenser employs a double surface area with a cooling finger sealed into the secondary cooling jacket. Serrated hose connections for water connection extend through the outer bulb and have an O.D. of 10mm at the middle serration. The jacket length is 200mm. PLEASE NOTE:…