Polystyrene-divinylbenzene adsorbent resin for SPE Features Highly porous polystyrene-divinylbenzene copolymer specific surface 1200 m2/g, particle size 50–100 μm very high binding capacity, up to 30 % of adsorbent weight (for comparison: silica adsorbents about 3 %) …

Features More than 50 different sationary phases available e.g., silica gel based: unmodified, C8, C18, NH2, CN; Polyermic material: HR-X, HLB, PA; mixed-mode, special combinations, aluminum oxide, kieselguhr (XTR) etc. NP, RP, ion exchanger and for special applications Different…

NUCLEOGEL® GPC Polymer-based phases for GPC of water-insoluble substances Features Polymer-based columns for size exclusion chromatography (SEC) or gel permeation chromatography (GPC) Spherical particles Highly crosslinked macroporous, spherical polystyrene –…

Features More than 50 different sationary phases available e.g., silica gel based: unmodified, C8, C18, NH2, CN; Polyermic material: HR-X, HLB, PA; mixed-mode, special combinations, aluminum oxide, kieselguhr (XTR) etc. NP, RP, ion exchanger and for special applications Different…

HPLC columns for analysis of inorganic anions NUCLEOGEL® Anion I: strongly basic polymer-based anion exchanger, particle size 10 µm pH stability: 1–14 eluent in column 4 mmol/L salicylate buffer pH 7.8 contrary to the silica-based phase also suited for fluoride analysis

Spherical, hydrophobic polystyrene-divinylbenzene resin for SPE Features Hydrophobic polystyrene-divinylbenzene copolymer pH stability 1–14 High-purity material with highest reproducibility and lowest blank values due to an optimized manufacturing process Spherical particles…

NUCLEOSHELL® core-shell silica phases for HPLC NUCLEOSHELL® Core-shell technology provides Better resolution at lower back pressure and shorter retention time Solid core of silicon dioxide Homogeneous shell of porous silica Highest efficiency compared to traditional…

HYDRODEX cyclodextrin phases Capillary columns for GC enantiomer separation Features Base material: cyclic oligosaccharides consisting of seven (β-cyclodextrin) or eight (γ-cyclodextrin) glucose units bonded through α-1,4-linkages Regioselective derivatization…

NUCLEODUR® is a fully synthetical type B silica (silica of 3rd generation) offering highly advanced physical properties: Totally spherical particle shape Outstanding surface microstructure High pressure stability Low metal content NUCLEODUR® as a state-of-the-art silica…

Connecting kits for CHROMABOND® Flash columns CHROMABOND® Flash Starter Kit consists of: 1/8" PTFE tubing, ID 1.5 mm, length 3 m; 5 x 1/4"-28 PP nuts; 5 x 1/8" ETFE ferrules; 5 x 1/4"-28 nylon unions; 2 x 1/4"-28 PP luer locks female; 1 x 1/4"-28 PP luer…

OPTIMA® 5 Amine GC capillary columns for amine separation Features Especially deactivated for the analysis of polyfunctional amines such as ethanol­amines, amino-functionalized diols and similar compounds, which are important base materials in industrial chemistry, and show…

NUCLEOSIL® is a family of totally porous spherical silicas with a very pure and uniform SiO2 structure Wide acceptance as routine packings for very different fields of chromatography One of the first spherical silicas used in HPLC Developed in the early seventies, it became a…

Polymer-based SPE phases for RP and ion chromatography Features Base material: high purity polystyrene-divinylbenzene copolymers (PS/DVB), pore size 100 Å, particle size 100 µm very low degree of swelling, thus very well suited for chromatography reliable function…

Features Cartridges filled with specified NUCLEODUR®, NUCLEOSIL® and NUCLEOSHELL® HPLC adsorbents Ideal protection for your analytical main column -> significant increase in column lifetime Minimized void volume -> suitable also for ultra fast HPLC Special ferrules…

NUCLEOSIL® is a family of totally porous spherical silicas with a very pure and uniform SiO2 structure Wide acceptance as routine packings for very different fields of chromatography One of the first spherical silicas used in HPLC Developed in the early seventies, it became a…

Polar, bifunctionally modified polystyrene-divinylbenzene copolymer Features Polar modified polystyrene-divinylbenzene copolymer with a weak anion exchanger, specific surface 650–700 m2/g, particle size 80 µm, pore size 50 Å, pH stability 1–14 The Easy…

OPTIMA® 5 MS Capillary columns for GC Features 5 % diphenyl – 95 % dimethylpolysiloxane USP G27 / G36 Nonpolar phase with low bleeding Suited for GC/MS and ECD application and general analyses at trace level Perfect inertness for basic compounds Similar…

NUCLEOSIL® is a family of totally porous spherical silicas with a very pure and uniform SiO2 structure Wide acceptance as routine packings for very different fields of chromatography One of the first spherical silicas used in HPLC Developed in the early seventies, it became a…

OPTIMA® 225 Capillary columns for GC Features 50 % cyanopropylmethyl – 50 % phenylmethylpolysiloxane · USP G7 / G19 Medium polar phase Recommended for fatty acid analyses Similar phases: DB-225, HP-225, OV-225, Rtx-225, CP-Sil 43, 007-225, BP225 Max.…

NUCLEODUR® is a fully synthetical type B silica (silica of 3rd generation) offering highly advanced physical properties: Totally spherical particle shape Outstanding surface microstructure High pressure stability Low metal content NUCLEODUR® as a state-of-the-art silica…

OPTIMA® 1 Capillary columns for GC Features 100 % dimethylpolysiloxane · USP G1 / G2 / G38 Nonpolar phase Separation of components according to boiling points Thick film columns ≥ 3 µm film are expecially recommended for solvent analysis. Low bleed…

Features More than 50 different sationary phases available e.g., silica gel based: unmodified, C8, C18, NH2, CN; Polyermic material: HR-X, HLB, PA; mixed-mode, special combinations, aluminum oxide, kieselguhr (XTR) etc. NP, RP, ion exchanger and for special applications Different…

Features Filtration cartridges for sample clarification under vacuum (e.g., using the CHROMABOND® vacuum manifold or SPE automation systems like Gilson Aspec™, Rapidtrace) or by gravity Cartridge sizes 3 mL and 6 mL Different membranes: PET (polyester); RC (regenerated…

Features More than 50 different sationary phases available e.g., silica gel based: unmodified, C8, C18, NH2, CN; Polyermic material: HR-X, HLB, PA; mixed-mode, special combinations, aluminum oxide, kieselguhr (XTR) etc. NP, RP, ion exchanger and for special applications Different…

NUCLEOSIL® is a family of totally porous spherical silicas with a very pure and uniform SiO2 structure Wide acceptance as routine packings for very different fields of chromatography One of the first spherical silicas used in HPLC Developed in the early seventies, it became a…

NUCLEOSIL® is a family of totally porous spherical silicas with a very pure and uniform SiO2 structure Wide acceptance as routine packings for very different fields of chromatography One of the first spherical silicas used in HPLC Developed in the early seventies, it became a…

Special phase for drying organic samples Features Anhydrous high-purity sodium sulfate which forms Glauber’s salt with traces of water – For removal of larger quantities of water several cartridges can be combined in series. Recommended application: removal of traces of…

NUCLEODUR® is a fully synthetical type B silica (silica of 3rd generation) offering highly advanced physical properties: Totally spherical particle shape Outstanding surface microstructure High pressure stability Low metal content NUCLEODUR® as a state-of-the-art silica…

VarioPrep (VP) columns for preparative HPLC Features Column system for preparative HPLC manufactured from stainless steel with two adjustable end fittings, e.g., for frequent use of backflushing techniques Allows compensation of a dead volume, which could result at the column inlet…

NUCLEOSHELL® core-shell silica phases for HPLC NUCLEOSHELL® Core-shell technology provides Better resolution at lower back pressure and shorter retention time Solid core of silicon dioxide Homogeneous shell of porous silica Highest efficiency compared to traditional…

NUCLEOGEL® SAX Polymer-based HPLC phases for anion exchange chromatography of biological macromolecules Features Polymer-based strongly basic anion exchanger -N+(CH3)3, gel matrix quaternized PEI · USP L23 Particle size 8 µm Pore size 1000 Å pH working range…

OPTIMA® BioDiesel Capillary columns for the analysis of BioDiesel (DIN EN 14214 / ASTM D 6751) OPTIMA® BioDiesel F for analysis of FAMEs in accordance with DIN EN 14103:2011 The analysis of biodiesel requires separation of typical FAMEs between myristic acid (C14) and nervonic…