Regular Clamp Holders Stainless steel electro-polished finish or nickel-plated zinc construction. Ideal for holding clamps to lab-frames. Use wherever clamping at 90° is required. Swivel Holders Two rod holders with center swivel capacity allow tilting of clamps at any angle in…

Wide adjustment range Autoclavable Stainless steel Polished finish Dual Adjustable Clamps are durable, multi-purpose clamps constructed of stainless steel and offer excellent chemical resistance and overall strength. The versatile 3-prong design secures a variety of lab apparatus…

OHAUS hand-operated inoculating turntables produce almost concentric circles of bacterial colonies that are evenly distributed across petri dishes. Cast iron turntables are coated with gray baked acrylic enamel. The 76 mm (3") high, small turntable accommodates 100 mm petri dishes. It has…

S-Connector Clamp is ideal for constructing lab-frames or other supports requiring the connection of two perpendicular rods. Clamp connects two 13 mm (0.51") rods at a 90° angle and features separate adjustment screws for each rod location. Lab Frame Foot Stainless steel…

Stainless steel electro-polished finish or nickel-plated zinc Large grip adjustment range 2-prong construction Single or dual adjust Designed to securely hold laboratory glassware and apparatus. Extension arm attaches clamp head securely and offers easy positioning in the deepest…

Model 704 Adjustable Stand Heavy-duty, cast aluminum stand with adjustable "L" brackets hold cylinders from 6 to 9.25" (152 to 235mm) in diameter. Hinges open for installation without lifting the cylinder or disturbing connections. Prevents accidental tipping. Hinges open for…

Strong Aluminum Alloy Fitted with Over-sized knobs Rods supported on 4 inch long surface to avoid vibration and wobble

LabJaws flow control devices offer selection and quality. They are finely machined to deliver accurate regulation or interruption of fluid flow. Every flow control device resists corrosion and rust. Hosecocks offer easy one-hand operation. Convex bearing surfaces and rounded edges protect tubing.…

Slide Staining Rack Constructed of stainless steel, the Talboys Slide Staining Rack will resist corrosion under normal use. Adjustable to fit trays or sinks up to 533mm (21") inside.

Used to hold apparatus near the lab-frame. Unlike extension clamps, the swivel clamps have an integral holder for attaching to a lab-frame or other apparatus. Built-in holder grips rods up to 19mm (0.75") in diameter and is adjustable for forward or reverse-facing adjustment screws. Shaft…

Rod End Connector (2824E29) Holds rods firmly at 90°. Use when semi-permanent installations are required. Comes with two set screws and is precision bored for close fit. S-Connector (2824E33) Clamps lab frame rods at 90° angle. Twin angled screws allow independent rod…

Center-less ground for a precise fit. These hard aluminum rods provida a smooth fit with lab-frames. Corrosion resistant with chanfered ends for easy location.

Easily attaches top most lab benches Frees up bench space Flexible support arm Support system easily attaches to the side of your lab bench or counter top, which helps utilize more space in your lab. Ultra Flex clamping system is extremely versatile and features a flexible arm that…

Anodized aluminum construction Three sizes Convenient Aluminum lab-lifts provide stable height adjustment for lab items such as flasks, baths and small equipment weighing up to 45 lbs. Aluminum lab-lifts come in three sizes: 4” x 4”, 6” x 6” and 8” x…

Multi-purpose UltraJaws Heavy-Duty Clamps feature an innovative closed yoke construction that minimizes contamination and corrosion of internal components. The unique design enables secure gripping and positioning with added strength and durability. Available in both single and dual prong…

Holds glass tubes or thermometers from 6 to 13 mm diamter. Swivel lock adjusts from any angle through 360°. Distance from thermometer to support rod in 99 mm. Overall length is 122 mm. Integral post holders for easy connections.

Stable base plate Flexible support arm 3 types of clamp heads Support system is designed with a stable base plate that fits easily on bench tops or in fume hoods. The system includes three interchangeable clamp heads that make it very versatile: 2-prong clamp head, 3-prong clamp head…

Designed to hold Erlenmeyer flasks Constructed of type 302 and 304 stainless steel Includes hardware for easy attachment to platforms Flask clamps are supplied with a spring to hold flask in place (except 25mL size)

Exceptional stability and control Stainless steel construction Seven sizes for any application Autoclavable and chemical-resistant Heavy-duty stainless steel lab-lifts are very stable lifting platforms that offer exceptionally high strength and durability. Constructed of…

Self tapping screw clamp secures small object to wall when no frames are available. 58 mm long with jaws adjustable from 5 to 10 mm. Wing nut clamp holds thermometer or other small glass apparatus.

Holds large round or irregular shaped objects firmly, yet gently to lab-frames and rods. Quick and secure slip-on chain connection with large, easy-to-turn adjusting knob. Extension arm allows user to vary distance from the frame. Available as stainless steel clamp constructed entirely of stainless…

Aluminum plate supports beakers, mantles and petri dishes. Fits standard lab-frames using connectors or holders.

Ideal for supporting funnels, round bottom flasks, reaction vessels, and other apparatus that requires lower support. Opening in PVC coated aluminum ring allows for easy removal of sample container. PVC coating protects glassware. Long extension arm permits depth adjustment of the open ring from…

Lightweight rings mount funnels, boiling flasks, and other irregular shaped objects to lab-frames. Open ring section allows items to pass in and out of support area easily, reducing risk of breakage. Aluminum construction.

Two-prong single adjust style tightly controls distances between glassware. Clamp swivels 360° and locks securely into position. Two jaw sizes; one up to 65 mm; the other up to 80 mm. 20 cm center to center distance.

Mounts to lab-frames or support stands Suitable for use in fume hoods 3 types of clamp heads Support system securely attaches to support stands, lab-frames, or any support rod up to 0.75” (1.9 cm) in diameter.  Ultra Flex clamping system is extremely versatile. Flexible arm…

LabJaws offers the largest selection of Lab-Frame Kits, Lab-Lifts, Rods and Support Stands in the industry to hold glassware safely. Whether you’re looking for a standard lab-frame or a customizable set-up, we have options to fit any space or application. Select from 13 pre-configured…

Like 2824B33 except with 12.5 mm extension rod. Holds 6 to 13 mm diamter objects up to 18 cm form support rod. Overall length is 21 cm. Requires clamp holder for attachment.

Heavy-duty, top-of-the-line rods provide maximum strength and durability. Constructed of 303 stainless steel.

17" Support Rod Kit is ideal for creating an adjustable support stand to mount various items such as thermometer clamps, temperature probes, flasks and column clamps. The kit allows users to mount a 17" vertical support rod to the deck of a 6" x 6", 8" x 8" or 10"…

Solid stainless steel equipped with large, easy-to-grip knobs Accommodates 1/2 inch to 5/8 inch diameter shaft of Talboys motor support and rod of 8596B10 support stand Stainless Steel Construction Strong aluminum alloy with a brushed finish and large knobs facilitate easy tightening…