Clamps/Supports, Chemglass, Equipment
-
Nylon Tubing Clamp Kit
ChemglassA great way to be prepared for your next clamping situation! Kit contains 5 each, of all 13 sizes, neatly organized in a polypropylene box with adjustable dividers.
-
Benchtop Support Stand, Single Setup
ChemglassFeatures: 3/4" S.S. Pipe (1.050" OD) Uprights and Heavy Duty PTFE Coated Aluminum Fittings Provide Maximum Strength and Chemical Durability. All S.S. Uprights are Passivated to Inhibit Corrosion. Middle Support Bracket is Vertically Adjustable and is Supplied…
-
Stainless Steel Springs
ChemglassStainless steel spring used to connect apparatus having hooks. All springs have an enlarged 1/4" ID loop at each end for easy connection to almost any size hook. Diameter of the coils on all sizes is 0.190". Length listed is the length between the loops.
-
Support Base
ChemglassSUPPORT BASES, RECTANGULAR SHAPED Base is made of cast iron with a black baked finish. Dimensions are 140 x 200mm. Base has two holes, one centered and one at the end of the short side. Rod is 10mm O.D. x 600mm (24”) in height. Total assembled weight is 1Kg. SUBLIMATION APPARATUS,Two-piece…
-
Stainless Steel LabJacks
ChemglassSupport Jack provide for stable height adjustment and support for items in the lab such as flasks, baths or hot plate stirrers. Top and bottom plates are constructed of stainless steel while the support mechanism is made of chrome plated steel.
-
Heavy Duty Clamp Holders
ChemglassHeavy duty epoxy coated alloy clamp has high tensile strength and corrosion resistance. Can be used to support stirrers, temperature monitors and condensers. Large hand knobs allow easy adjusment and secure clamping power. Useful wherever clamping at 90° is required.
-
Flow control adapter for use with CG-1198 and CG-1199 chromatography columns along with CG-1200 reservoir. Adapter has a 0-4mm Chem-Cap® metering plug.
-
Support, Solid Tripod
ChemglassBase is made of cast iron with a baked black finish. Rod is 10mm O.D. x 600mm (24 ". Available in two sizes.
-
-
Support Tubes, Stainless Steel
ChemglassThese support tubes are made of brilliant polished 304 stainless steel. They have good surface hardness and do not score from clamp binding screws. Tubes are 1/2" (13mm) in diameter, and are hollow, reducing weight to 1/2 of solid stainless steel rods while maintaining all the advantages of…
-
Pinch Clamps, Stainless Steel
ChemglassMade entirely of stainless steel. Part numbers CG-150-01 and CG-150-03 are supplied WITHOUT a screw type locking device. All other sizes have the screw type locking device.
-
Similar to CG-141 but with the entire clamp PTFE coated for chemical durability.
-
Clamps, Sanitary, Heavy Duty, Single Pin
ChemglassSingle pin style heavy duty sanitary clamp made from 304 stainless steel. For use with our sanitary adapters.
-
Keck Clamps
ChemglassMade of Delrin®, the clamp is non-corrosive and will not scratch glass. Can be used to 140°C. Color coded for easy identification. SOLD IN PACKAGES OF 10.
-
Clamps, PTFE, Standard Taper Joints
ChemglassPTFE molded clamps with a steel core can withstand temperatures up to 250° C and are totally chemically resistant and inert.
-
ChemRxnHub™ Support Stands
ChemglassFeatures: S.S. Uprights and Heavy Duty PTFE Coated Aluminum Fittings Provide Maximum Strength and Chemical Durability. Supports Reactors from 300mL to 5L. Removable Polyethylene Spill Tray. Adjustable Middle Support Bracket is Vertically Adjustable. It Accepts Our…
-
Chain Clamp
ChemglassCLAMPS, CHAIN, 12IN EXTENSION, Similar to the CG-9220-01 except has a 12" long arm. Clamp can accommodate up to 6-1/2” (170mm) O.D. respectively. Quick slip-on chain connection has large, easy-to-turn adjusting knob. Grip is vinyl coated. VALVES, CHEM-VAC, HIGH VACUUM, LOW HOLD UP,…
-
Flask Support Ring, Rubber
ChemglassFlask support ring has a concave recess on top to support round bottom flasks from 250 to 500mL. 5-1/8" diameter.
-
ChemRxnHub™ Dual Support Stand
ChemglassFeatures: S.S. Uprights and Heavy Duty PTFE Coated Aluminum Fittings Provide Maximum Strength and Chemical Durability. Supports TWO Reactors side by side from 300mL to 5L. Removable Polyethylene Spill Tray. Adjustable Middle Support Bracket is Vertically…
-
Optional items are an 8” x 8” extension plate and a 18” high vertical support rod. PLEASE NOTE: ROD IS REQUIRED FOR ATTACHMENT OF EXTENSION PLATE.
-
S.S. Clamps, ChemRxnHub™ Reactors
ChemglassReplacement S.S. reactor clamps for ChemRxnHub™ support stands.
-
Support, Chem-Jack, Lattice Mount
ChemglassLab Jack Features: Only support jack on the market that attaches directly to a 1/2" diameter vertical lab frame or lattice rod. Heavy gauge aluminum construction provides excellent rigidity and support. Fabricated to precise tolerances allowing smooth vertical adjustment. …
-
Benchtop Support Stand, Mobile
ChemglassFeatures 3/4" S.S. Pipe (1.050" OD) Uprights and Heavy Duty PTFE Coated Aluminum Fittings Provide Maximum Strength and Chemical Durability All S.S. Uprights are Passivated to Inhibit Corrosion Adjustable S.S. Shelf/Tray Supports Reactors from 250mL to 5L Single…
-
Safety Collars, Nylon
ChemglassDesigned to be placed on the stirrer shaft directly above the bearing. The collar provides protection against the stirrer shaft dropping and hitting the bottom of the vessel. The collar also acts as a dust cover and permits the stirrer to be positioned off the bottom of the vessel. Supplied…
-
Flow control adapter for use with CG-1192 and CG-1193 chromatography columns along with CG-1194 reservoirs. Adapter has a 0-4mm Chem-Cap® metering plug.
-
ChemRxnHub™ Triple Support Stand
ChemglassFeatures: S.S. Uprights and Heavy Duty PTFE Coated Aluminum Fittings Provide Maximum Strength and Chemical Durability. Supports THREE Reactors side by side from 300mL to 5L. Removable Polyethylene Spill Tray. Adjustable Middle Support Bracket is Vertically…
-
Anodized Aluminum LabJacks
ChemglassLaboratory support jacks provide for stable height adjustment and support for items in the lab such as flasks, baths or hot plate stirrers. Top and bottom plates are constructed of anodized aluminum while the support mechanism is made of chrome plated steel.
-
Support Rings with Clamp
ChemglassSolid ring with built in clamp for attachment directly to support rod. Available in three sizes. Nickel plated zinc alloy.
-
Flow control adapter for use with CG-1188 and CG-1189 chromatography columns along with CG-1190 reservoirs. Adapter has a 0-4mm Chem-Cap® metering plug.
-
Support ring is constructed of 1/2" OD. PTFE coated stainless steel rod. Made with an opening for easy insertion of reactor with an 8in long rod for connection to lattice.
-
PTFE Support Rings
ChemglassPTFE support ring used to support round bottom flasks or cylindrical reaction vessels.
-
Lattice Support Shelf
ChemglassShelf can be attached to any lattice setup using the supplied CG-9250-01 clamp holder. Shelf is 9" wide x 10" deep and anodized green with a neoprene surface to prevent items from slipping off. The 1/2" square support rod is 7.5" long. Square support rod prevents shelf from…