Casework

Compare Tool

Select up to 3 products

1 - 32 of 55
Sort
View
Show
  • Protector Acid Storage Cabinets and Shelf Kits

    Labconco

    Protector Acid Storage Cabinets support all Labconco benchtop fume hoods and safely store and vent acids and other corrosive liquids. Features: two rear vent connection cutouts for venting the cabinet into a fume hood; durable epoxy-coated steel construction; corrosion-resistant polyethylene-lined…

  • Standing Height Base Cabinets with 4 Drawers

    INSTOCK Labs

    Standing Height Steel Base Cabinets are durable and constructed with SEFA 8 Metal and compliant load-bearing capacity. Pearl White is a urethane powder coating that provides reliable chemical and abrasion resistance.

  • Standing Height Sink Cabinets with 2 Doors

    INSTOCK Labs

    Standing Height Steel Base Cabinets are durable and constructed with SEFA 8 Metal and compliant load-bearing capacity. Pearl White is a urethane powder coating that provides reliable chemical and abrasion resistance.

  • Protector Solvent Storage Cabinets with Manual-Closing Doors

    Labconco

    Protector Solvent Storage Cabinets support all Labconco fume hoods and safely store and vent solvents and other flammable liquids. Features: two rear vent connections with flame arrestors and closure plugs; durable dual wall epoxy-coated steel construction with 1.5" air gap; glacier white…

  • Electric Hydraulic Lift Base Stands for Purifier Logic Biosafety Cabinets

    Labconco

    Electric Hydraulic Lift Base Stands are equipped with a built-in hydraulic lift with up/down switch so that height may be adjusted at any time. They provide support for a variety of Labconco fume hoods and enclosures. These adjustable stands allow you to position the equipment to accommodate…

  • Standing Height Base Cabinets with 8 Drawers

    INSTOCK Labs

    Standing Height Steel Base Cabinets are durable and constructed with SEFA 8 Metal and compliant load-bearing capacity. Pearl White is a urethane powder coating that provides reliable chemical and abrasion resistance.

  • Electrical Receptacle, -33 20 Amp, 125 V Straight Blade

    Water Saver Faucet Co.

  • Cabinet Fillers

    INSTOCK Labs

    Corner Fillers are used to close the gap between two cabinets in a corner. Adjustable fillers can be cut to fit and include a slip fit trim angle. Front Fillers are used between adjacent base cabinets of between a cabinet and the wall. Rear and Center Fillers are used between back-to-back…

  • Surgical Scrub Sinks

    Eagle Group

    16ga/304 stainless steel, removable front access panel, 4" backsplash, square edge on front and sides, temperature control mixing valve, Z-clips for wall mounting, includes stainless steel flat strainer drain, tail piece and p-trap, includes flexible stainless steel supply hoses.

  • 27 1/4" Tall Mobile Cabinets, 3 Drawer

    INSTOCK Labs

    Mobile cabinets are on locking swivel casters which allow them to be moved. Ideal for under a table or workstation lab environment. Mobile cabinet has a finished back and top. Provided without locks. Cabinet has counter weighted anti-tip design. Optional work surface sold separately.

  • Knee Space Panels

    INSTOCK Labs

    Knee Space Panels for Drawer Aprons are to be used with Drawer Aprons. Knee Space Panels for Drawer Aprons are to be used with Apron Rails. The knee space closes off the casework to the wall to create a clear sitting under the work surface.

  • Standing Height Corner Cabinets, Right Hinged

    INSTOCK Labs

    Standing Height Steel Base Cabinets are durable and constructed with SEFA 8 Metal and compliant load-bearing capacity. Pearl White is a urethane powder coating that provides reliable chemical and abrasion resistance.

  • Manual Hydraulic Lift Base Stands for Purifier Horizontal Clean Bench

    Labconco

    Manual Hydraulic Lift Base Stands are equipped with a built-in hydraulic lift with hand crank so that height may be adjusted at any time. They provide support for a variety of Labconco fume hoods and enclosures. These adjustable stands allow you to position the equipment to accommodate persons…

  • Sitting Height Base Cabinet, Left Hinged

    INSTOCK Labs

    Sitting Height Steel Base Cabinets are durable and constructed with SEFA 8 Metal and compliant load-bearing capacity. Pearl White is a urethane powder coating that provides reliable chemical and abrasion resistance.

  • 27 1/4" Tall Mobile Cabinets, Right Hinged

    INSTOCK Labs

    Mobile cabinets are on locking swivel casters which allow them to be moved. Ideal for under a table or workstation lab environment. Mobile cabinet has a finished back and top. Provided without locks. Cabinet has counter weighted anti-tip design. Optional work surface sold separately.

  • Telescoping Base Stands for Purifier Logic Biosafety Cabinets

    Labconco

    Available with fixed feet or casters Telescoping Base Stands with Fixed Feet: provide support for a variety of Labconco fume hoods and enclosures. Stands have removable pins to adjust the legs to eight different heights in 1" increments from 27.5" to 34.5". Four fixed…

  • Sink Supports

    INSTOCK Labs

    Sink Supports are required for undermount sinks.

  • SoLo Hydraulic Lift Base Stands for Purifier Logic Biosafety Cabinets

    Labconco

    SoLo Hydraulic Lift Base Stands are designed to support Purifier Logic Biosafety Cabinets. They are constructed of durable epoxy-coated steel and support a maximum of 700 pounds of equipment, excluding the weight of the safety cabinet. A built-in hydraulic lift is operated by a remote control with…

  • Apron Rails

    INSTOCK Labs

    Apron Rails are used to span a knee space area between two cabinets. Attachment hardware is included. Can be cut to fit in the field.

  • 32 3/8" Tall Mobile Cabinets, Right Hinged

    INSTOCK Labs

    Mobile cabinets are on locking swivel casters which allow them to be moved. Ideal for under a table or workstation lab environment. Mobile cabinet has a finished back and top. Provided without locks. Cabinet has counter weighted anti-tip design. Optional work surface sold separately.

  • Scienceware® Polypropylene Sinks

    Bel-Art - SP Scienceware

    Laboratory sink, drain board, backsplash and legs are made entirely of polypropylene plastic for excellent chemical resistance and easy cleaning. Material is unaffected by acids, alkalis and boiling solutions under 121°C (250°F) 15cm (6") high backsplash and shorter side and…

  • Drop-In Epoxy Resin Sinks

    INSTOCK Labs

    Durable black epoxy sinks are chemically resistant, come with coved corners and are pitched to the drain. All tub sinks are furnished complete with a tail piece and strainer. Drop in sinks can be converted to be undermount sinks, however cabinet sink supports will be required. 2017 INSTOCK…

  • Sitting Height Base Cabinets with 3 Drawers

    INSTOCK Labs

    Sitting Height Steel Base Cabinets are durable and constructed with SEFA 8 Metal and compliant load-bearing capacity. Pearl White is a urethane powder coating that provides reliable chemical and abrasion resistance.

  • Sinks

    INSTOCK Labs

    These durable black epoxy sinks are chemically resistant, come with coved corners and are pitched to a corner or center drain. All tub sinks are furnished complete with a tail piece and strainer. Drop in sinks can be converted to be undermount sinks, however cabinet sink supports will be required. …

  • Electric Hydraulic Lift Base Stands for Purifier Horizontal Clean Bench

    Labconco

    Electric Hydraulic Lift Base Stands are equipped with a built-in hydraulic lift with up/down switch so that height may be adjusted at any time. They provide support for a variety of Labconco fume hoods and enclosures. These adjustable stands allow you to position the equipment to accommodate…

  • Vent Kit For Acid Storage Cabinet

    Labconco

    Used for venting the Protector Acid Storage Cabinet through the SpillStopper Work Surface and into the fume hood. Includes one plastic vent tube assembly complete with 2" diameter threaded connection locknut, flexible tubing and vent extension

  • Base Stands

    Labconco

    Adjustable height accommodates persons sitting or standing Support Protector, Protector XL Benchtop, HOPEC IV. Basic fume hoods, Paramount Ductless Enclosures, Purifier Class I and HEPA Filtered Enclosures, Purifier Clean Benches, PCR Enclosures, Protector XVS Ventilation Station and XPert…

  • Standing Height, Solvent Storage Cabinets, Right Hinged

    INSTOCK Labs

    Solvent Storage Standing Height Cabinet has self-closing doors and are used to store flammables and solvents. Construction meets UFC, OSHA and MFPA No. 30-1993. Includes vent bungs with flame arrestors. The doors are self-closing and synchronized so that both doors will always fully close. The…

  • Protector Solvent Storage Cabinets With Self-Closing Doors

    Labconco

    Protector Solvent Storage Cabinets support all Labconco fume hoods and safely store and vent solvents and other flammable liquids. Features: two rear vent connections with flame arrestors and closure plugs; durable dual wall epoxy-coated steel construction with 1.5" air gap; glacier white…

  • Glove Box Base Stands

    Labconco

    Adjustable Height Mobile Base Stands and Adjustable Height Stationary Base Stands have permanently-mounted black laminate work surfaces and epoxy-coated steel frames. These base stands are designed to support Protector Glove Boxes and Precise Glove Boxes and may also function as tables for general…

  • Mobile Cabinet Work Surfaces

    INSTOCK Labs

    Mobile Cabinet Work Surface is 3/4" thick black phenolic resin that provides a 1" overhang on the front and a 1/2" overhang at the rear and sides. It adds 3/4" to the over all height of the cabinet. There is a grip notch included under the front edge of the work surface to…

  • Suspended Pencil Drawer

    INSTOCK Labs

    Suspended Pencil Drawer is designed to be hung from an INSTOCK table. Each suspended pencil drawer is furnished with complete hanging hardware.

Compare Tool

Select up to 3 products

Please Log In

Don't have an Account? Create one now.